Abstract
This chapter summarises the practical applications of superconductors (bulks, wires and magnets). They are a superconductor bulk magnet, superconductor-magnet bearings for flywheel energy storage device with high energy storage efficiency, a high-speed rotation device, magnetic separation using bulk superconductors, current leads and superconductors for magnetic shielding, superconducting wires (PIT-processed MgB2 and REBCO coated conductor), and Superconducting propulsion ship.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Onnes HK (1911) Further experiments with liquid helium: the resistance of pure mercury at helium temperatures. Commun Phys Lab Univ Leiden 120b:124c
Meissner W, Ochsenfield R (1933) Ein neuer Effekt bei Eintritt der Supraleitfähigkeit. Naturwissenschafen 21(44):787
Morita M, Teshima H, Hirano H (2006) Development of oxide superconductor - high-Tc bulk superconductor, QMG, and Its magnetic application. Nippon Steel Tech Rep 93:18
Ogun SE, Goktas H, Ozkan H, Gasanly NM (2005) Effect of low-energy electron irradiation on (Bi,Pb)-2212 superconductor. Surf Coat Technol 196:118
Vasiliu F, Sandu V, Nita P, Popa S, Cimpoiasu E, Bunescu MC (1998) The role of irradiation damage structure and fine scale precipitation in the pinning improvement of thermal neutron irradiated lithium flouride-doped YBa2Cu3O7-x. Physica C 303:209
Hébert S, Hardy V, Villard G, Hervieu M, Simon C, Provost J (1998) Pinning enhancement in Bi2Sr2CaCu2O8 by tilting columnar defects from the c axis. Physica C 299:259
Shlyk L, Krabbes G, Fuchs G, Stӧver G, Gruss S, Nenkov K (2002) Pinning behavior and magnetic relaxation in melt-processed YBCO doped with Li, Ni and Pd. Physica C 377:437
Zhao Y, Cheng CH, Wang JS (2005) Flux pinning by NiO-induced nano-pinning centres in melt-textured YBCO superconductor. Supercond Sci Technol 18:S43. https://doi.org/10.1088/0953-2048/18/2/010
Zhou YX, Scruggs S, Salama K (2006) Effects of ionic doping on superconducting properties of melt textured YBa2(Cu1-xMx)3O7-δ (M=Co, Ni, Zn or Ga) large grains. Supercond Sci Technol 19:S556. https://doi.org/10.1088/0953-2048/19/7/S26
Shlyk L, Krabbes G, Fuchs G, Nenkov K, Schüpp B (2005) Effects of annealing treatments on the superconducting melt-processed YBCO doped with Ni. Supercond Sci Technol 18:S10. https://doi.org/10.1088/0953-2048/18/2/003
Murakami M, Gotoh S, Kosizuka N, Tanaka S, Matsushita T, Kambe S, Kitazawa K (1990) Critical currents and flux creep in melt processed high Tc oxide superconductors. Cryogenics 30:390
Kim C-J, Kuk I-H, Hong G-W, Sung T-H, Han S-C, Kim JJ (1998) CeO2 as a growth inhibitor of Y2BaCuO5 in a Ba3Cu5Ox liquid phase. Mater Lett 34:392
Kim C-J, Qadir N, Mahmood A, Han Y-H, Sung T-H (2007) The effect of BaCeO3 nano particles on the current density of a melt-processed YBCO superconductor. Physica C 463–465:344
Ren Y, Weinstein R, Liu J, Sawh RP, Foster C (1995) Damage caused by magnetic pressure at high trapped field in quasi-permanent magnets composed of melt-textured Y-Ba-Cu-O superconductor. Physica C 251:15
Tomita M, Murakami M (2003) High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K. Nature 421:517
Gruss S, Fuchs G, Krabbes G, Verges P, Stӧver G, Müller K-H, Fink J, Schultz L (2001) Superconducting bulk magnets: very high trapped fields and cracking. Appl Phys Lett 79(19):3131
Nougem JG, Meslin S, Harnois C, Chateigner D, Caud X (2004) Melt textured YBa2Cu3Oy bulk with artificially patterned holes: a new way of processing c-axis fault current limiter meanders. Supercond Sci Technol 17:931
Dias DH, Sotelo GG, Moysés LA, Telles LGT, Bernstein P, Kenfaui D, Aburas M, Chadm J G Noudem X (2015) Application of texture YBCO bulks with artificial holes for superconducting magnet bearing. Supercond Sci Technol 28:075005. https://doi.org/10.1088/0953-2048/28/7/075005
Kim K-M, Park S-D, Jun B-H, Ko TK, Kim C-J (2012) Simple die pressing for making artificial holes in single-grain Gd1.5Ba2Cu3O7-y superconductors. Supercond Sci Technol 25:105016. https://doi.org/10.1088/0953-2048/25/10/105016
Oka T, Kanayama H, Fukui S, Ogawa J, Sato T, Ooizumi M, Terasawa T, Itoh Y, Yabuno R (2008) Application of HTS bulk magnet system to the magnetic separation techniques for water purification. Physica C 468:2128
Yokoyama K, Oka T, Okada H, Noto K (2003) High gradient magnetic separation using superconducting bulk magnets. Physica C 392–396:739
Chiba A, Okada H, Tada T, Nakazawa H, Mitsuhashi K, Ohara T, Wada H (2002) Removal of arsenic from geothermal water by high gradient magnetic separation. IEEE Trans Appl Supercond 12(1):952
Coombs TA, Campbell AM, Ganney I, Lo W, Twardowski T, Dawsonm Mater B (1998) Superconducting bearing in flywheels. Sci Eng B53:225
Hull JR (2000) Superconductor bearing. Supercond Sci Technol 13:R1
Han YH, Hull JR, Han SC, Jeong NH, Sung TH, No K (2005) Design and characteristics of a superconductor bearing. IEEE Trans Appl Phys 15(2):2249
Werfel FN, F-Delor U, Rothfield R, Riedel T, Goebel B, Wippich D, Scirrmeister P (1998) Superconductor bearings, flywheels and transportation. Supercond Sci Technol 25:014007. https://doi.org/10.1088/0953-2048/25/1/014007
Ribeiro PF, Johnson BK, Crow ML, Arsoy A, Liu Y (2001) Energy storage systems for advanced power applications. Proc IEEE 89(12):1744
Shigenatsu K, Ohta H, Hoshino K, Takayama H, Yagishta O, Yamazaki S, Takahara H, Aono M (1989) Magnetic shield of high-Tc oxide superconductors at 77 K. Jpn J Appl Phys 28(5):L813
Matsuba H, Yahara A, Urisawa D (1992) Magnetic shielding properties of HTc superconductor. Supercond Sci Technol 5:S432
Denis S, Susoulier L, Diricky M, Vaderbemden P, Cloots R, Ausloos M, Vaderheyden B (2007) Magnetic shielding properties of high-temperature superconducting tubes subjected to axial fields. Supercond Sci Technol 20:192. https://doi.org/10.1088/0953-2048/20/3/014
Kim KT, Lim JH, Jang SH, Park EC, Joo J, Hong G-W, Kim C-J, Kim H-R, Hyun O-B (2007) Fabrication and characterization of BSCCO-2212 tube prepared by centrifugal casting. Physica C 463–465:460
Elschner S, Bock J, Brommer G (1996) High currents in MCP BSCCO 2212 bulk material. IEEE Trans Mag 32(4):2724
Wesche R, Fuchs AM (1994) Design of superconducting current leads. Cryogenics 34(2):145
Ogiwara H (1992) In: Murakami M (ed) Melt processed high-temperature superconductors. World Scientific Publishing, Singapore, p 317
Saito K, Zaitsu K (2016) Nb3Sn wire technology for high-field superconducting magnet. Koelco Technol Rev 43:72
Lindenhovius HIH, Hornsveld EM, Ouden AD, Wessel WAJ, ten Kate HHJ (2000) Powder-in-Tube (PIT) Nb3Sn conductors for high-field magnets. IEEE Trans Appl Supercond 10(1):975
Nagamatsu J, Nakayama N, Muranaka T, Zenitani Y, Akimitsu J (2001) Superconductivity at 39 K in magnesium diboride. Nature 410:63
Ekin JW, Braginski AI, Panson AJ, Janocko MA, Capone DW II, Zaluzec NJ, Flandermeyer B, de Lima OF, Hong M, Kwo J, Lio SH (1998) Evidence for weak link and anisotroy limitations on the transport critical current in bulk polycrystalline Y1Ba2Cu3Ox. J Appl Phys 62:4821. https://doi.org/10.1063/1.338985
Izumi F, Asano H, Ishigaki T, Ono A, Okamura F (1987) Crystal structure of a Ba-Y-Cu-O superconductor as revealed by rietveld analysis of X-Ray powder diffraction data. Jpn J Appl Phys 26(5):L611
Sato K, Hikata T, Mukai H, Ueyama M, Shibuta N, Koto T, Masuda T, Nagata M, Iwata K, Mitsui T (1991) High-Jc silver-sheathed Bi-based superconducting wires. IEEE Trans Mag 27(2):1231
Malozemoff AP, Annavarapu S, Fritzemeier L, Li Q, Prunier V, Rupicj M, Thieme C, Zhang W, Goyal A, Paranthaman M, Lee DF (2000) Low-cost YBCO coated conductor technology. Supercond Sci Technol 13:473
Yang J, Zhang H, Feng XL, Liu HZ, Zhou Q (2010) Study on deposition of YBCO for coated conductor using pulsed laser deposition. J Phys Conf Ser 234:022043
V Braccini AX, Jaroszynski J, Xin Y, Larbalestier DC, Chen Y, Carota G, Dackow J, Kesgin I, Yao Y (2011) Properties of recent IBAD-MOCVD coated conductors relevant to their high field, low temperature magnet use. Sci Technol 24:035001. https://doi.org/10.1088/0953-2048/24/3/035001
Rupich MW, Rupich MW, Schoop U, Verebelyi DT, Thieme C, Zhang W, Li X, Kodenkandath T, Nguyen N, Siegal E, Buczek D, Lynch J, Jowett M, Thompson E, Wang J-S, Scudiere J, Malozemoff AP, Li Q, Annavarapu S, Cui S, Fritzemeier L, Aldrich B, Craven C, Niu F, Schwall R, Goyal A, Paranthaman M (2003) YBCO coated conductors by an MOD/RABiTS™ process. IEEE Trans Appl Supercond 13(2):2458
Kim KT, Lim JH, Kim JH, Joo J, Nah W, Ki Ji B, Jun B-H, Kim C-J, Hong G-W (2004) Development of cube-textured Ni-W alloy substrates for YBCO-coated conductor. Physica C 412–414:859
Overduin J, Polyak V, Rutah A, Sebastian T, Selway J, Zile D (2017) The hunt for red october II: A magnetohydrodynamic boat demonstration for introductory physics. Phys Teach 55:460. https://doi.org/10.1119/1.5008337
Fleming’s left-hand rule. https://en.wikipedia.org/wiki/Fleming%27s_left-hand_rule_for_motors
The Superconducting MHD-Propelled Ship Yamato 1. https://en.wikipedia.org/wiki/Yamato_1
Takezawa S, Tamama H, Sugawawa K, Sakai H, Matsuyama C, Morita H, Suzuki H, Ueyama Y (1995) Operation of the thruster for superconducting electromagnetohydrodynamic propulsion ship “YAMATO1”. Bull MESJ 23(1):46
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Kim, CJ. (2019). Applications of Superconductors. In: Superconductor Levitation. Springer, Singapore. https://doi.org/10.1007/978-981-13-6768-7_11
Download citation
DOI: https://doi.org/10.1007/978-981-13-6768-7_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6767-0
Online ISBN: 978-981-13-6768-7
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)