Abstract
Owing to the advantages of plastics like cheapness, endurance, lightness, hygiene, and design adaptability, its use is increasing day by day. The negative side of the picture is that it is nonbiodegradable product and they cannot be disposed to open environment, because they affect the environment, soil, and subsoil. They release toxic gasses when exposed to open environment and can block sewer lines, drainages, and other waterways. Plastics are also harmful to human health; they may contain or lead to harmful acids. Thus, recycling of plastic is essential in today’s condition. Incorporating the waste plastics in concrete by converting them into aggregates is one of the possible solutions to consume them. In the present study, work of various authors on natural fine aggregates partially replaced with recycled plastic fine aggregates in concrete is analyzed. The various mechanical and durability properties of concrete made with incorporation of plastic fine aggregates are presented in the paper.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Akçaözoǧlu S, Atiş CD, Akçaözoǧlu K (2010) An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete. Waste Manag 30:285–290. https://doi.org/10.1016/j.wasman.2009.09.033
Akçaözoǧlu S, Akçaözoǧlu K, Atiş CD (2013) Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA). Compos B Eng 45:721–726. https://doi.org/10.1016/j.compositesb.2012.09.012
Amalu RG, Ashraf A, Hashim M, Rejith KU, Vijitha VR (2016) Use of waste plastic as fine aggregate substitute in concrete. Int J Sci & Eng Res 7:172–177
Arivalagan S (2016) Experimental investigation on partial replacement of waste plastic in concrete. Int J Eng Sci & Res Technol 5:443–449. https://doi.org/10.5281/zenodo.167190
Batayneh M, Marie I, Asi I (2007) Use of selected waste materials in concrete mixes. Waste Manag 27:1870–1876. https://doi.org/10.1016/j.wasman.2006.07.026
Choi YW, Moon DJ, Chung JS, Cho SK (2005) Effects of waste PET bottles aggregate on the properties of concrete. Cem Concr Res 35:776–781. https://doi.org/10.1016/j.cemconres.2004.05.014
Da Silva AM, De Brito J, Veiga R (2014) Incorporation of fine plastic aggregates in rendering mortars. Constr Build Mater 71:226–236. https://doi.org/10.1016/j.conbuildmat.2014.08.026
Frigione M (2010) Recycling of PET bottles as fine aggregate in concrete. Waste Manag 30:1101–1106. https://doi.org/10.1016/j.wasman.2010.01.030
Gaur K, Jyotsana J, Arya AK, Singh NK (2017) Use of plastic as partial replacement of fine aggregate in fibre reinforced concrete. IOSR J Mech Civ Eng 14:71–74. https://doi.org/10.9790/1684-1403037174
Guendouz M, Debieb F, Boukendakdji O et al (2016) Use of plastic waste in sand concrete. J Mater Environ Sci 7:382–389
Harini B, Ramana KV (2015) Use of recycled plastic waste as partial replacement for fine aggregate in concrete. Int J Innov Res Sci, Eng Technol 4:8596–8603. https://doi.org/10.15680/IJIRSET.2015.0409106
Ismail Al-Hadithi A, Fawzi Ahmed Alani M (2015) Mechanical properties of high performance concrete containing waste plastic as aggregate. J Eng 21:100–115
Ismail ZZ, AL-Hashmi EA (2008) Use of waste plastic in concrete mixture as aggregate replacement. Waste Manag 28:2041–2047. https://doi.org/10.1016/j.wasman.2007.08.023
Jibrael MA, Peter F (2016) Strength and behavior of concrete contains waste plastic. J Ecosyst & Ecography 6:2–5. https://doi.org/10.4172/2157-7625.1000186
Mathew P, Ambika KP, Prakash P et al (2016) Comparative study on waste plastic incorporated concrete blocks with ordinary concrete blocks. Int Res J Eng Technol 3:1894–1896
Osei DY (2014) Experimental investigation on recycled plastics as aggregate in concrete. Int J Struct Civ Eng Res 3:168–174
Rahmani E, Dehestani M, Beygi MHA et al (2013) On the mechanical properties of concrete containing waste PET particles. Constr Build Mater 47:1302–1308. https://doi.org/10.1016/j.conbuildmat.2013.06.041
Reis JML, Carneiro EP (2012) Evaluation of PET waste aggregates in polymer mortars. Constr Build Mater 27:107–111. https://doi.org/10.1016/j.conbuildmat.2011.08.020
Safi B, Saidi M, Aboutaleb D, Maallem M (2013) The use of plastic waste as fine aggregate in the self-compacting mortars: Effect on physical and mechanical properties. Constr Build Mater 43:436–442. https://doi.org/10.1016/j.conbuildmat.2013.02.049
Saikia N, de Brito J (2013) Waste polyethylene terephthalate as an aggregate in concrete. Mater Res 16:341–350. https://doi.org/10.1590/S1516-14392013005000017
Seetharaman G (2017) The Economic Times. ET Bureau
Thosar PC, Husain M (2017) Reuse of plastic waste as replacement of sand in concrete. Int J Innov Res Sci, Eng Technol 6:789–794
Yongo E, Manyala JO, Kito K, Matsushita Y, Outa NO, Njiru JM (2016) Diet of Silver Cyprinid, Rastrineobola argentea in Lake Victoria, Kenya. Int J Adv Res 4:144–149. https://doi.org/10.21474/IJAR01
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kapoor, K., Gupta, B.K., Singh, S. (2019). Properties of Concrete Made with Plastic Aggregates. In: Agnihotri, A., Reddy, K., Bansal, A. (eds) Sustainable Engineering. Lecture Notes in Civil Engineering, vol 30. Springer, Singapore. https://doi.org/10.1007/978-981-13-6717-5_34
Download citation
DOI: https://doi.org/10.1007/978-981-13-6717-5_34
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6716-8
Online ISBN: 978-981-13-6717-5
eBook Packages: EngineeringEngineering (R0)