Abstract
Simulation is a vital tool for validation of methods and architectures in the complex manufacturing environment before there application on shop floor for the production process. Manufacturing simulation, digital engineering tools and procedures have a positive impact on the manufacturing industry. Simulation models have been extensively used in manufacturing to enhance the design, planning and productivity of the processes. In manufacturing environment, crucial material movement, is controlled by various dynamic factors. Situations becomes cumbersome for assembling plants which deal with multi-product, owing to the dominance and interconnectedness of dynamic factors. Analysing of these factors in real-life business environment is very complex in nature and required the use of modelling and simulation tools. This chapter glimpses modelling and simulation application, in a multi-product automobile gear manufacturing plant, aimed for development of an efficient production system that expresses ability for assurance of timely product deliveries at minimal cost. For three distinct type of gear production lines, simulation-based models were developed using Arena® Simulation Software. The proposed simulation model is capable enough to increase the resource’s utilization rate and production rate of gear manufacturing process by identifying the bottlenecks in the manufacturing system. The models developed are capable enough to be synchronized with the company’s other products and hence aids in highly precise production planning and scheduling exercises within the company.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- SCM:
-
Supply Chain Management
- SC:
-
Supply Chain
- WIP:
-
Work in Process
- EOL:
-
End of Life
- AGV:
-
Automated Guided Vehicle
- ISO:
-
International Standard Organization
- FIFO:
-
First-in, First-Out
References
Forrester, J.W.: Industrial dynamics–After the first decade. Manag. Sci. 14(7), 398–415 (1968)
Altiok, T., Melamed, B.: Simulation modelling and analysis with Arena. Elsevier (2010)
Rota, K., Thierry, C.: Supply chain management. Prod. Plann. Control 13(4), 370–380 (2002)
Al-Khudairi, T., Al Kattan, I.Y.: Improving supply chain management effectiveness using RFID. IEEE Xplore 191–198 (2007). https://doi.org/10.1109/iemc.2007.5235073
Awasthi, A., Chauhan, S.S.: A simulation model for parts selection and routing in manufacturing systems. In: Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, pp. 619–623 (2009)
Baldwin, J.S., Allen, P.M., Ridgway, K.: An evolutionary complex systems decision support tool for the management of operations. Int. J. Oper. Prod. Manag. 30(7), 700–720 (2010)
Patel, N.V., Tariq, T.E., Khan, M.: Theory of deferred action. J. Enterp. Inf. Manag. 23(4), 521–537 (2010)
Nyemba, W.R., Dzimba, T.: The role of modelling and simulation in decision making for manufacturing enterprises. In: Proceedings of 5th International Conference on Manufacturing Processes, Systems & Operation Management, pp. 11–21 (2013)
Kumar, H.A.: A review on modelling and simulation of building energy systems. J. Renew. Sustain. Energy Rev. 56, 1272–1292 (2016)
Anderson, D.R., Sweeney, D.J., Williams, T.A., Camm, J.D., Cochran, J.J.: Quantitative methods for business. Twelfth Edition South Western College Publishing Cincinnati (2013)
Negahban, A., Smith, J.S.: Simulation for manufacturing system design and operation: literature review and analysis. J. Manuf. Syst. 33, 241–261 (2014)
Ruiz, N., Giret, A., Botti, V., Feria, V.: An intelligent simualtion environment for manufacturing systems. Comput. Ind. Eng. 76, 148–168 (2014)
Jayant, A., Gupta, P., Garg, S.K.: Simulation modelling and analysis of network design for closed loop supply chain: a case study of battery industry. Procedia Eng. 97, 2213–2231 (2014)
Jayant, A., Gupta, P., Garg, S.K.: Reverse logistics network design for spent batteries: a simulation study. Int. J. Logist. Syst. Manag. 18(3), 343–365 (2014)
Jayant, A., Azhar, M., Singh, P.: Interpretive structural modeling (ISM) approach: a state of the art literature review. Int. J. Res. Mech. Eng. Technol. 4(3), 15–21 (2014). ISSN 2249-5770
Jayant, A., Paul, V., Kumar, U.: Application of analytic network process (ANP) in business environment: a comprehensive literature review. Int. J. Res. Mech. Eng. Technol. 4(3), 29–43 (2014)
Nyemba, W.R., Mbohwa, C.: Modelling, simulation and optimization of the materials flow of a multi-product assembling plant. Procedia Manuf. 8, 59–66 (2017)
Bloomfield, R., Mazhari, E., Hawkins, J., Son, Y.J.: Interoperability of manufacturing applications using the core manufacturing applications using the core manufacturing simulation data standard information model. J. Comput. Ind. Eng. 62, 1065–1079 (2012)
Martis, M.S.: Validation of simulation based models: a theoretical outlook. Electron. J. Bus. Res. Methods 4(1), 39–46 (2006)
Wiktorson, M.: Consideration of legacy structures enabling a double helix development of production systems and products. In: Technology and Manufacturing Process Selection. Springer Series in Advanced Manufacturing (2014)
Kelton, D., Law, W.A.: Simulation Modelling and Analysis. McGraw-Hill, New York (1991)
Acknowledgements
The authors are highly thankful and share gratitude to whole management and staff of XYZ company, which enabled to succeed in this presented work, by carving cooperative paths for the collection of data and providing all necessary inputs required for pursuing this research work. Editor-in-chief and anonymous referees are also thanked for their valuable suggestions and constructive comments having the potential to explore new horizons in this field.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sharma, J., Jayant, A. (2019). Modelling, Simulation and Optimization of Product Flow in a Multi-products Manufacturing Unit: A Case Study. In: Sachdeva, A., Kumar, P., Yadav, O. (eds) Operations Management and Systems Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-6476-1_11
Download citation
DOI: https://doi.org/10.1007/978-981-13-6476-1_11
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6475-4
Online ISBN: 978-981-13-6476-1
eBook Packages: EngineeringEngineering (R0)