Abstract
The aim of this research work is to find the optimum combination of input process parameters such as peak current (IP), open voltage (Vg), pulse-on-time (Ton) and duty factor (τ) for machining of Inconel 718 on EDM. The output response parameters studied were metal removal rate (MRR), electrode wear rate (EWR) and surface roughness (Ra). L16 orthogonal array of input parameters was created as the design of experiments (DOEs) with the help of Minitab software. Grey relational analysis (GRA) method is used to get a single domain of multiple output response parameters. After that Taguchi optimization method was applied to find out the optimal parameter setting for higher MRR, lower TWR and lower Ra.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Mishra DN, Bhatia A, Rana V (2014) Study on EDM. Int J Eng Sci 3(2):24–35
Muller F, Monaghan J (2000) Non-conventional machining of particle reinforced metal matrix composite. Int J Mach Tools Manuf 40(9):1351–1366
Lau WS (2000) Unconventional machining of composite materials. J Mater Process Technol 48:199–205
Ezugwu (2005) Key improvements in the machining of difficult to cut aerospace superalloys. Int J Mach Tools Manuf 45:1353–1367
Sudhakara D, Venkataramana BN, Sreenivasulu B (2012) The experimental analysis of surface characteristics of inconel 718 using electrical discharge machining. IJMERR 1(3). ISSN: 2278-0149
Ahmad S, Lajis MA (2014) Effect of higher peak current and pulse duration on EWR of copper electrode when electrical discharge machining (EDM) of inconel 718. Adv Mat Res 845:945–949
Rahul, Abhishek K, Datta S, Biswal BB, Mahapatra SS (2017) Machining performance optimization for electro-discharge machining of inconel 601, 625, 718 and 825: an integrated optimization route combining satisfaction function, fuzzy inference system and Taguchi approach. J Braz Soc Mech Sci Eng 39(9):3499–3527
Rahul, Datta S, Biswal BB, Mahapatra SS (2018) Optimization of electro-discharge machining responses of super alloy inconel 718: use of satisfaction function approach combined with Taguchi philosophy. Mater Today Proc 5(2):4376–4383
Lin CL (2004) Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics. Mater Manuf Processes 19(2):209–220. https://doi.org/10.1081/amp-120029852
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Ghaus Ali, M., Rahul, Banik, D., Yadav, A., Rautara, B.C., Sahoo, A.K. (2019). Analysis and Optimization of Surface Integrity Characteristics of EDMed Work Surface Inconel 718 Super-Alloy Using Grey-Based Taguchi Method. In: Shanker, K., Shankar, R., Sindhwani, R. (eds) Advances in Industrial and Production Engineering . Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-6412-9_43
Download citation
DOI: https://doi.org/10.1007/978-981-13-6412-9_43
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6411-2
Online ISBN: 978-981-13-6412-9
eBook Packages: EngineeringEngineering (R0)