Abstract
India produces abundant of industrial waste like bottom ash (CBA) and waste foundry sand (WFS) whose productive use or recycling and reuse is the best option available to reduce the threat caused by their disposal on environment. This research work aimed to find possibility of using both these waste materials in concrete for which study of characteristics of the materials is important. It is found that CBA needs to be processed before using in concrete. The results of Grounded CBA & WFS resemble within its permissible limit, and thus, these waste materials can be used as a substitute of cement and sand, respectively. Experiments are conducted on concrete containing CBA & WFS in the proportion of 10 and 6%, respectively. Through the experiment, we concluded that processed CBA & WFS can be partially replaced for cement and sand, respectively.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Baig, A.M., Varghese, V.: Waste foundry sand as fine aggregate in concrete for resistance to sulfuric acid attack. In: IJERMCE, vol. 2, issue 3, pp. 269–273 (2017)
Siddique, R., de Schutter, G., Noumowe, A.: Effect of used-foundry sand on the mechanical properties of concrete. Constr. Build. Mater. 23, 976–980 (2009)
Attar, I.M., Gupta, A.K.: Application of foundry sand in civil construction. IOSR J. Mech. Civil Eng. (IOSR-JMCE), 38–42, ISSN: 2278-1684
Kurama, H., Kaya, M.: Usage of coal combustion bottom ash in concrete mixture. Constr. Build. Mater. 22, 1922–1928 (2008)
Ramzi, S.S., Mand, M.Z., Ali, N.: Physical and chemical properties of coal bottom ash (CBA) from Tanjung Bin Power Plant, IRIS, IOP Conference Series (2016)
Amritkar, S., Chandak, S.P., Jadhav, R.: Effect of waste foundry sand (WFS) on the mechanical properties of concrete with artificial sand as fine aggregate. In: IJERT, vol. 14. ISSN: 2278_0181 (2015)
Pathariya, C., Rana, K., Shah, A., Mehta, G., Patel, A.: Application of waste foundry sand for evolution of low-cost concrete. In: IJETT, vol. 4 (2013)
Singh, G., Siddique, R.: Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete. Constr. Build. Mater. 26, 416–422 (2012)
Olubajo, O., Osha, A., Nafaty, U., Adamu, H.: Effect of water-cement ratio on the mechanical properties of blended cement containing bottom ash and limestone. Civil and Environmental Research www.iiste.org. ISSN 2224-5790 (Paper) ISSN 2225-0514 (Online) vol. 6, no. 12 (2014)
Jaturapitakkul, C., Cheerarot, R.: Development of bottom ash as pozzolanic material. J. Mater. Civil Eng., 48–53 (2003)
IS 4031(part 2): 1996. Methods of physical tests on hydraulic cement, determination of fineness by dry sieving
IS 2386 (part 3): 1963. Methods of test for aggregates for concrete, specific gravity, density, voids, absorption and bulking
IS 9103: 1999. pH of Coal bottom ash and Waste foundry sand
Indian Bureau of Mines: Chemical tests
IS 383: 1970. Specification for coarse and fine aggregates from natural sources for concrete
IS 2185 (part1): 2005. Procedure of water absorption & initial surface absorption
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Baig, A., Varghese, V. (2019). Study of Properties of Coal Bottom Ash and Waste Foundry Sand and its Use in Concrete. In: Kolhe, M., Labhasetwar, P., Suryawanshi, H. (eds) Smart Technologies for Energy, Environment and Sustainable Development. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-6148-7_17
Download citation
DOI: https://doi.org/10.1007/978-981-13-6148-7_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-6147-0
Online ISBN: 978-981-13-6148-7
eBook Packages: EnergyEnergy (R0)