Skip to main content
SpringerLink
Log in

High Temperature Ductility and Industrial Control Technology of Ni-Base Superalloy GH90

  • Conference paper
  • First Online:
Physics and Engineering of Metallic Materials (CMC 2018)

Part of the book series: Springer Proceedings in Physics ((SPPHY,volume 217))

Included in the following conference series:

  • 1412 Accesses

Abstract

In order to figure out the high temperature ductility and industrial control technology of GH90, a systematic study was carried out by theoretical calculation, laboratory tests, and industrial experiments. The effect of major alloying element on equilibrium phase diagrams was calculated by Jmatpro and the effect of the element on high temperature ductility was theoretically analyzed, and the control of major element content was specified. In addition, hot compression test was carried out on thermo-simulator system Gleeble3500 at varying temperatures (900–1200 °C) and reduction ratio (10–70%). Based on above study, the hot forging and rolling technology was proposed and industrial experiment was carried out. The result showed that the deformation temperature was the main factor to influence the high temperature ductility of GH90 and the suitable deformation temperature is above 950 °C.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 189.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 249.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. M.J. Donachie, S.J. Donachie, Superalloys: A Technical Guide (ASM International, 2002)

    Google Scholar 

  2. M. Durand-Charre, The Microstructure of Superalloys (Routledge, 2017)

    Google Scholar 

  3. F.S. Pettit, C.S. Giggins, C.T. Sims et al., Superalloys II (Wiley, New York, NY, 1987), p. 327

    Google Scholar 

  4. J.A. Daleo, J.R. Wilson, GTD111 alloy material study. J. Eng. Gas Turbines Power 120(2), 375–382 (1998)

    Article  CAS  Google Scholar 

  5. N.K. Park, I.S. Kim, Y.S. Na et al., Hot forging of a nickel-base superalloy. J. Mater. Process. Technol. 111(1–3), 98–102 (2001)

    Article  CAS  Google Scholar 

  6. G. Shen, D. Furrer, Manufacturing of aerospace forgings. J. Mater. Process. Technol. 98(2), 189–195 (2000)

    Article  Google Scholar 

  7. G.E. Dieter, Workability testing techniques. Am. Soc. Met. 1984, 324 (1984)

    Google Scholar 

  8. R.J. Siddall, J.W. Eggar, Production and quality control of superalloy forging-quality billet. Mater. Sci. Technol. 2(7), 728–732 (1986)

    Article  CAS  Google Scholar 

  9. E. Chlebus, K. Gruber, B. Kuźnicka et al., Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting. Mater. Sci. Eng. A 639, 647–655 (2015)

    Article  CAS  Google Scholar 

  10. A. Momeni, S. Kazemi, G. Ebrahimi et al., Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression. Int. J. Min. Metall. Mater. 21(1), 36–45 (2014)

    Article  CAS  Google Scholar 

  11. I. Mejía, A.E. Salas-Reyes, A. Bedolla-Jacuinde et al., Effect of Nb and Mo on the hot ductility behavior of a high-manganese austenitic Fe–21Mn–1.3 Al–1.5 Si–0.5 C TWIP steel. Mater. Sci. Eng. A 616, 229–239 (2014)

    Article  Google Scholar 

  12. Y.C. Lin, J. Deng, Y.Q. Jiang et al., Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy. Mater. Des. 55, 949–957 (2014)

    Article  CAS  Google Scholar 

  13. Y. Tian, O.I. Gorbatov, A. Borgenstam et al., Deformation microstructure and deformation-induced martensite in austenitic Fe-Cr-Ni alloys depending on stacking fault energy. Metall. Mater. Trans. A 48(1), 1–7 (2017)

    Article  CAS  Google Scholar 

  14. N. Chaudhary, A. Abu-Odeh, I. Karaman et al., A data-driven machine learning approach to predicting stacking faulting energy in austenitic steels. J. Mater. Sci. 52(18), 11048–11076 (2017)

    Article  CAS  Google Scholar 

  15. J.P. Liebig, S. Krauß, M. Göken et al., Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression. Acta Mater. (2018)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Beijing Beiye Functional Materials Corporation, Beijing, 100192, China

    Xin-li Wen & Qing-quan Zhang

  2. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, China

    Chao-lei Zhang, Bo Jiang & Ya-zheng Liu

Authors
  1. Xin-li Wen
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Qing-quan Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Chao-lei Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Bo Jiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Ya-zheng Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Xin-li Wen .

Editor information

Editors and Affiliations

  1. Chinese Materials Research Society, Beijing, China

    Yafang Han

Rights and permissions

Reprints and permissions

Copyright information

© 2019 Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Wen, Xl., Zhang, Qq., Zhang, Cl., Jiang, B., Liu, Yz. (2019). High Temperature Ductility and Industrial Control Technology of Ni-Base Superalloy GH90. In: Han, Y. (eds) Physics and Engineering of Metallic Materials. CMC 2018. Springer Proceedings in Physics, vol 217. Springer, Singapore. https://doi.org/10.1007/978-981-13-5944-6_65

Download citation

  • DOI: https://doi.org/10.1007/978-981-13-5944-6_65

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-13-5943-9

  • Online ISBN: 978-981-13-5944-6

  • eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)

Publish with us

Policies and ethics

Search

Navigation