Simulation and Experimental Study on Hot Forging Process of SiCp/2A14 Composite

  • Hansen Zheng
  • Zhifeng ZhangEmail author
  • Yuelong Bai
Conference paper
Part of the Springer Proceedings in Physics book series (SPPHY, volume 217)


Taking the trackboard as the research object, the hot forging process of SiCp/2A14 composite slug prepared by stirring and casting method was studied by using numerical simulation and experimental research. The effects of slug size, hot forging pressure, hot forging time, and the heat treatment process on the formability and mechanical properties of the product were studied. The results show that the size of the blank of the similar volume has a great influence on the formability of the part. If the thickness is too thick or too thin, it will lead to die filling dissatisfaction; the higher the hot forging pressure, the more times of forging, the better the formability; after solid solution at 500 °C for 6 h, the parts aging for 8 and 12 h can obtain satisfactory mechanical properties, but it is found that as the aging time increases, the tensile strength of the composite increases while the elongation decreases.


SiCp/2A14 composites Hot forging Heat treatment Mechanical properties 


  1. 1.
    M.A. Xavior, J.P.A. Kumar, Machinability of hybrid metal matrix composite—a review. Procedia Eng. 174, 1110–1118 (2017)CrossRefGoogle Scholar
  2. 2.
    T.S. Srivatsan, I.A. Ibrahim, F.A. Mohamed et al., Processing techniques for particulate-reinforced metal aluminium matrix composites. J. Mater. Sci. 26(22), 5965–5978 (1991)CrossRefGoogle Scholar
  3. 3.
    G.H. Wu, Development challenge and opportunity of metal matrix composites. Acta Materiae Compositae Sin. 31(5), 1228–1237 (2014)Google Scholar
  4. 4.
    J.A. Liu, S.S. Xie, Application and Technology Development of Aluminum Alloy Materials (Metallurgical Industry Press, Beijing, 2004)Google Scholar
  5. 5.
    Z.L. Zhang, Z.F. Zhang, J. Xu, H. Zhang, W.M. Mao, Effect of mechanical stirring and air pressure on the fluidity of SiCp/A357 composites. Mater. Sci. Forum 898, 1000–1006 (2017)CrossRefGoogle Scholar
  6. 6.
    B.L. Xiao, J. Bi, M.J. Zhao et al., Effect of SiCp size on tensile properties and fracture mechanism of aluminum matrix composites. Acta Metall. Sin. 38(9), 1006–1008 (2002)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.General Research Institute for Nonferrous MetalsBeijingChina

Personalised recommendations