Abstract
The improvement and development of new techniques in material science are progressively rapid. An experimental programme was conducted to assess the influence of addition of steel fibres to self-compacting concrete (SCC). The aim of present experimental work is to study the effect of superplasticizer and steel fibres on the properties of fresh and hardened SCC. Based on the properties of constituent materials, various trials mixes were produced by varying material proportions, w/c ratio and superplasticizer dosage. An optimum mix design satisfying all requirements of SCC was obtained. Steel fibres of varying percentages from 0 to 5% were added to optimum mix to carry out study on the properties of fresh and hardened SCC. Slump flow, V-funnel and L-Box tests were conducted to study the properties of fresh SCC. Cubes and cylinders were cast cured for 28 days and tested for compressive strength and split tensile strength to study the properties of hardened SCC. The results obtained indicate a direct impact of dosage of superplasticizer and percentage content of fibres on the properties of fresh and hardened SCC.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Ozawa, K., Maekawa, K., Kunishima, H., & Okamura, H. (1989) Performance of concrete based on the durability design of concrete structures. In Proceedings, 2nd East-Asia-Pacific conference on structural engineering and construction (Vol. 1, pp. 445–456). Chiang Mai, Thailand.
Li, V. C. (1995). New construction materials proliferate in Japan. Civil Engineering (N.Y.), 65(8), 38–41.
Yurugi, M. (1998). Application of self-compacting concrete in Japan. In Proceedings, 23th OWICS Conference, pp. 29–42, CI-premier, Singapore.
Petersson, O. (1998). Application of self-compacting concrete for bridge castings. Stockholm, Sweden: Swedish Cement and Concrete Research Institute.
Khayat, K. H., Paultre, P., & Tremblay, S. (2001). Structural performance and in-place properties of self-consolidating concrete used for casting highly reinforced columns. ACI Materials Journal, 98(5), 371–378. https://doi.org/10.14359/10726.
Khayat, K. H., Manai, K. & Trudel, A. (1997). In-situ mechanical properties of wall elements cast using self-compacting concrete. ACI Materials Journal, 94 (6), 491–500. https://doi.org/10.14359/333.
Persson, B. (2003). Sulphate resistance of Self-compacting concrete. Cement and Concrete Research, 33(12), 1933–1938. https://doi.org/10.1016/S0008-8846(03)00184-4.
Bai, W., Zhang, J., Yan, P., & Wang, X. (2009). Study on vibration alleviating properties of glass fibre reinforced polymer concrete through orthogonal tests. Materials & Design, 30(4), 1417–1421. https://doi.org/10.1016/j.matdes.2008.06.028.
Shasha, Wang, & Min-Hong, Zhang. (2012). Quek Ser Tong: Mechanical behaviour of fibre reinforced high-strength concrete subjected to high strain-rate compressive loading. Construction and Building Materials, 31, 1–11. https://doi.org/10.1016/j.conbuildmat.2011.12.083.
Grdic, Z. J., Curcic, G. A. T., Ristic, N. S., & Despotovic, I. M. (2012). Abrasion resistance of concrete micro-reinforced with polypropylene fibres. Construction and Building Materials, 27(1), 305–312. https://doi.org/10.1016/j.conbuildmat.2011.07.044.
Holschemacher, K., Mueller, T., & Ribakov, Y. (2010). Effect of steel fibres on mechanical properties of high-strength concrete. Materials and Design, 31(5), 2604–2615. https://doi.org/10.1016/j.matdes.2009.11.025.
Boukendakdji, O., Kadri, E., & Kenai, S. (2012). Effects of granulated blast furnace slag and superplasticizer type on the fresh properties and compressive strength of self-compacting concrete. Cement and Concrete Composites, 34(4), 583–590. https://doi.org/10.1016/j.cemconcomp.2011.08.013.
Guneyisi, E., Gesoglu, M., & Mermerdas, K. (2008). Improving strength, drying shrinkage, and pore structure of concrete using métakaolin. Materials and Structures, 41(5), 937–949. https://doi.org/10.1617/s11527-007-9296-z.
Naik, T. R., Kumar, R., Ramme, B. W., & Canpolat, F. (2012). Development of high-strength, economical self-consolidating concrete. Construction and Building Materials, 30, 463–469. https://doi.org/10.1016/j.conbuildmat.2011.12.025.
Niknezhad, D., Raghavan, B., Bernard, F., & Kamali-Bernard, S. (2015). Towards a realistic morphological model for the meso-scale mechanical and transport behaviour of cementitious composites. Composites Part B: Engineering, 81, 72–83. https://doi.org/10.1016/j.compositesb.2015.06.024.
Raghavan, B., Niknezhad, D., Bernard, F., & Kamali-Bernard, S. (2016). Combined meso-scale modelling and experimental investigation of the effect of mechanical damage on the transport properties of the cementitious composite. Journal of Physics and Chemistry of Solids, 96, 22–37. https://doi.org/10.1016/j.jpcs.2016.04.013.
Türkel, S., & Kandemir, A. (2010). Fresh and hardened properties of SCC made with different aggregate and mineral admixtures. Journal of Materials in Civil Engineering, 22(10), 1025–1032. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000107.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zende, A., Khadiranaikar, R.B. (2019). Experimental Investigation of High-Strength Self-Compacting Fibre-Reinforced Concrete. In: Das, B., Neithalath, N. (eds) Sustainable Construction and Building Materials. Lecture Notes in Civil Engineering , vol 25. Springer, Singapore. https://doi.org/10.1007/978-981-13-3317-0_32
Download citation
DOI: https://doi.org/10.1007/978-981-13-3317-0_32
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3316-3
Online ISBN: 978-981-13-3317-0
eBook Packages: EngineeringEngineering (R0)