Abstract
After integration into an electronic chip, the nano-energetic materials have found a very important role as portable microscale energy systems in many applications such as micro-actuation for micro-fluidics, micro-ignition, micro-propulsion, and onboard micro-power unit. However, there has been an ongoing challenge to fabricate high-reactive and high-energy density nano-energetic materials and integrate it with microelectromechanical system (MEMS) devices. There are various micro-/nanofabrication methodologies to develop and integrate the nano-energetic materials into a chip. This chapter discusses the different approaches and methods of realization of nano-energetic materials on a chip and details about the ignition sensitivity, energy density, and combustion performance. The chapter also particularizes the application of the chip-integrated nano-energetic materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Badgujar DM, Talawar MB, Asthana SN, Mahulikar PP (2008) Advances in science and technology of modern energetic materials: an overview. J Hazard Mater 151:289–305
Bahrami M, Taton G, Condra V, Salvagnac L, Tenailleau C, Alphonse P, Rossi C (2014) Magnetron sputtered Al-CuO nanolaminates: effect of stoichiometry and layers thickness on energy release and burning rate. Propellants, Explos Pyrotech 39:365–373
Barbee TW, Simpson RL, Gash AE, Satcher JH (2005) Nanolaminate-based ignitors. U.S. Patent WO 2005016850 A2, 24 Feb
Chen Y, Zhang W, Yu C, Ni D, Ma K, Ye J (2018) Controllable synthesis of NiCo2O4/Al core-shell nanowires thermite film with excellent heat release and short ignition time. Mater Des 155:396–403
Di Biaso H, English BA, Allen MG (2004) Solid-phaseconductivefuels for chemical microactuators. Sens Act A, Phys 111(2/3):260–266
Fried LE, Manaa MR, Pagoria PF, Simpson RL (2001) Design and synthesis of energetic materials. Annu Rev Mater Res 31:291–321
Hinshaw JC (1995) Thermite compositions for use as gas generants. International Patent WO 95/04672
Hofmann A, Laucht H, Kovalev D, Timoshenko VY, Diener J, Kunzner N, Gross E (2006) Explosive composition and its use. U.S. Patent 6 984 274, 10 Jan
Hong CC, Murugesan S, Beaucage G, Choi JW, Ahn CH (2003) A functioning on-chip pressure generator using solid chemical propellant for disposable lab-on-a-chip. Lab Chip 3(4):281–286
Ke X, Zhou X, Gao H, Hao G, Xiao L, Chen T, Liu J, Jiang W (2018) Surface functionalized core/shell structured CuO/Al nanothermite with long-term storage stability and steady combustion performance. Mater Des 140:179–187
Kim KJ, Jung H, Kim JH, Jang NS, Kim JM, Kim SH (2017) Nanoenergetic material-on-multiwalled carbon nanotubes paper chip as compact and flexible igniter. Carbon 114:217–223
Laucht H, Bartuch H, Kovalev D (2004) Silicon initiator, from the idea to functional tests. In: Proceedings of 7th international symposium and exhibition Sophist car occupant safety systems, pp 12–16
Lewis DH, Janson SW, Cohen RB, Antonsson EK (2000) Digital micropropulsion. Sens Act A, Phys 80(2):143–154
Li D, Lu XB, Zhou ZZ, Qiu MX, Lin CG (1988) Laser initiated aluminothermic reaction applied to preparing Mo–Si film on silicon substrates. Mater Res Soc Symp 101:487–490
Lindsay W, Teasdale D, Milanovic V, Pister K, Pello CF (2001) Thrust and electrical power from solid propellant microrockets. In: 14th IEEE International Conference on MEMS, Piscataway, NJ, pp 606–610
Meeks K, Pantoya ML, Apblett C (2014) Deposition and characterization of energetic thin films. Combust Flame 161:1117–1124
Molodtsova OV, Aristova IM, Babenkov SV, Vilkov OV, Aristov VY (2014) Morphology and properties of a hybrid organic-inorganic system: Al nanoparticles embedded into CuPc thin film. J Appl Phys 115:164310
Murray AK, Novotny WA, Fleck TJ, Emre GI, Son SF, Chiua GTC, Rhoads JF (2018) Selectively-deposited energetic materials: a feasibility study of the piezoelectric inkjet printing of nanothermites. Addit Manuf 22:69–74
Nicollet A, Salvagnac L, Baijot V, Estève A, Rossi C (2018) Fast circuit breaker based on integration of Al/CuO nanothermites. Sens Act A: Phys 273:249–255
Norton AA, Minor MA (2006) Pneumatic micro actuator powered by the deflagration of sodium azide. J Microelectromech Syst 15(2):344–354
Patel VK, Ganguli A, Kant R, Bhattacharya S (2015) Micropatterning of nanoenergetic films of Bi2O3/Al for pyrotechnics. RSC Adv 5:14967–14973
Pennarun P, Rossi C, Estève D, Bourrier D (2006) Design, fabrication and characterization of a MEMS safe pyrotechnical igniter integrating arming, disarming and sterilization functions. J Micromech Microeng 16(1):92–100
Petrantoni M, Rossi C, Salvagnac L, Conédéra V, Estève A, Tenailleau C, Alphonse P, Chaba YJ (2010) Multilayered Al/CuO thermite formation by reactive magnetron sputtering: Nano versus micro. J Appl Phys 108:084323
Pham PQ, Briand D, Rossi C, De Rooij NF (2003) Downscaling of solid propellant pyrotechnical microsystems. In: 12th international conference on solid-state sensor and act (Transducers), Boston, MA, pp 1423–1426
Pile àgrave (2005) combustible pour l’alimentation d’appareils électroniques, notamment portables. Patent FR2 818 808 (In French)
Rossi C, Estève D (1997) Pyrotechnic micro actuators. In: Proceedings of 11th EUROSENSORS XI, vol. 2. Varsovie, Pologne, pp 771–774
Rossi C, Estève D, Mingués C (1999) Pyrotechnic actuator: a new generation of Si integrated actuator. Sens Act A, Phys 74(1–3):211–215
Rossi C, Briand D, Dumonteuil M, Camps T, Pham PQ, de Rooij NF (2006) Matrix of 10 × 10 addressed solid propellant microthrusters: review of the technologies. Sens Act A, Phys 126(1):241–252
Rossi C, Zhang K, Esteve D, Alphonse P, Tailhades P, Vahlas C (2007) Nanoenergetic materials for MEMS: a review. J Microelectromech Syst 16:919–931
Shen J, Qiaoa Z, Wang J, Zhang K, Li R, Nie F, Yang G (2014) Pressure loss and compensation in the combustion process of Al–CuO nanoenergetics on a microheater chip. Combust. Flame 161(11):2975–2981
Staley CS, Morris CJ, Thiruvengadathan R, Apperson SJ, Gangopadhyay K, Gangopadhyay S (2011) Silicon-based bridge wire micro-chip initiators for bismuth oxide–aluminum nanothermit. J Micromech Microeng 21:115015
Stewart DS (2004) Miniaturization of explosive technology and microdetonics. 21st ICTAM, Varsaw, Poland
Sui H, LeSergent L, Wen JZ (2017) Diversity in addressing reaction mechanisms of nano-thermite composites with a layer by layer structure. Adv Eng Mater 20(3):1700822
Takahashi K, Ebisuzaki H, Kajiwara H, Achiwa T, Nagayama K (2000) “Design and testing of mega-bit microthruster arrays,” presented Nanotech, Houston, TX, Paper AIAA 2002-5758
Tanaka S, Hosokawa R, Tokudome S, Hori K, Saito H, Watanabe M, Esashi M (2003) MEMS-based solid propellant rocket array thruster with electrical feedthroughs. Trans Jpn Soc Aeronaut Space Sci 46(151):47–51
Tappan AS, Long GT, Renlund AM, Kravitz SH (2003) Microenergetic materials-microscale energetic material processing and testing. In: 41st AIAA aerospace sciences meeting and exhibition, Reno, NV, AIAA-2003-0242
Tappan AS, Long GT, Wroblewski B, Nogan J, Palmer HA, Kravitz SH, Renlund AM (2005) Patterning of regular porosity in PETN microenergetic material thin films. In: 36th international conference on ICT, Karlsruhe, Germany, pp 134–135
Teasdale D, Milanovic V, Chang P, Pister K (2001) Microrockets for smart dust. Smart Mater Struct 10(6):1145–1155
Troianello T (2001) Precision foil resistors used as electro-pyrotechnic initiators. In: Proceedings of 1st electronic components technology conference, Orlando, FL, pp 1413–1417
Vasylkiv O, Sakka Y (2005) Nanoexplosion synthesis of multimetal oxide ceramic nanopowders. Nano Lett 5(12):2598–2604
Vasylkiv O, Sakka Y, Skorokhod VV (2006) Nano-blast synthesis of nano-size CeO2-Gd2O3 powders. J Am Ceram Soc 89(6):1822–1826
Yang Y, Xu D, Zhang K (2012) Effect of nanostructures on the exothermic reaction and ignition of Al/CuOx based energetic materials. J Mater Sci 47:1296–1305
Yin Y, Li X, Shu Y, Guo X, Zhu Y, Huang X, Bao H, Xu K (2017) Highly-reactive Al/CuO nanoenergetic materials with a tubular structure. Mater Des 117:104–110
Youngner DW, Lu ST, Choueiri E, Neidert JB, Black RE, Graham KJ, Fahey D, Lucus R, Zhu X (2000) MEMS mega-pixel micro-thruster arrays for small satellite stationkeeping. In: 14th annual AIAA/USU conference small satellites, Logan, UT, AIAA Paper SSC00-X-2
Yu C, Zhang W, Hu B, Ni D, Zheng Z, Liu J, Ma K, Ren W (2018a) Core/shell CuO/Al nanorods thermite film based on electrochemical anodization. Nanotechnology 29(36)
Yu C, Zhang W, Yu G, J D, Z Ni, Ye C, Ma K (2018b) The super-hydrophobic thermite film of the Co3O4/Al core/shell nanowires for an underwater ignition with a favorable aging-resistance. Chem Eng J 338:99–106
Zakiyyan N, Wang A, Thiruvengadathan R, Staley C, Mathai J, Gangopadhyay K, Maschmann MR, Gangopadhyay S (2018) Combustion of aluminum nanoparticles and exfoliated 2D molybdenum trioxide composites. Combust Flame 187:1–10
Zhang KL, Chou SK, Ang SS, Tang XS (2005) A MEMS-based solid propellant microthruster with Au/Ti igniter. Sens Act A, Phys 122(1):113–123
Zhang W, Baoqing Y, Shen R, Ye J, Thomas JA, Chao Y (2013) Significantly enhanced energy output from 3D ordered macroporous structured Fe2O3/Al nanothermite film. ACS Appl Mater Interface 5:239–242
Zhao Y, English BA, Choi Y, Di Biaso H, Yuan G, Allen MG (2004) Polymeric microcombustors for solid-phase conductive fuels. In: Proceedings of 17th IEEE international conference on MEMS, Maastricht, The Netherlands, pp 498–501
Zhou X, Shen R, Ye Y, Zhu P, Hu Y, Wu L (2011) Influence of Al/CuO reactive multilayer films additives on exploding foil initiator. J Appl Phys 110:094505
Zhou X, Xu D, Zhang Q, Lu J, Zhang K (2013) Facile green in situ synthesis of Mg/CuO core/shell nanoenergetic arrays with a superior heat-release property and long-term storage stability. ACS Appl Mater Interface 5:7641–7646
Zhou X, Xu D, Yang G, Zhang Q, Shen J, Lu J, Zhang K (2014) Highly exothermic and superhydrophobic Mg/fluorocarbon core/shell nanoenergetic arrays. ACS Appl Mater Interface 6(13):10497–10505
Zhu P, Shen R, Ye Y, Zhou X, Hu Y (2011) Energetic igniters realized by integrating Al/CuO reactive multilayer films with Cr films. J Appl Phys 110:074513
Zhu P, Shen R, Ye Y, Fu S, Li D (2013) Characterization of Al/CuO nanoenergetic multilayer films integrated with semiconductor bridge for initiator applications. J Appl Phys 113:184505
Zhu P, Jiao J, Shen R, Ye Y, Fu S, Li D (2014) Energetic semiconductor bridge device incorporating Al/MoOx multilayer nanofilms and negative temperature coefficient thermistor chip. J Appl Phys 115:194502
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Katiyar, J.K., Patel, V.K. (2019). Nano-energetic Materials on a Chip. In: Bhattacharya, S., Agarwal, A., Rajagopalan, T., Patel, V. (eds) Nano-Energetic Materials. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-13-3269-2_6
Download citation
DOI: https://doi.org/10.1007/978-981-13-3269-2_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3268-5
Online ISBN: 978-981-13-3269-2
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)