Abstract
The use of stern flaps, either fixed or controllable and interceptors in high-speed boats, has become an acceptable option to control the running trim of the vessel to enhance its speed and powering performance. The interceptor changes the pressure distribution underneath the hull over a certain distance forward of the transom. The stern interceptor effect on planing craft performance depends on its parameters and also on those of the craft. The aim to improve the performance on already built high-speed crafts has become an important issue for ecological and economic aspects. So, an in-depth study of the hydrodynamic behaviour of interceptor is essential, before it is adapted to a vessel, to get the best performance during the craft operation. Computational fluid dynamics (CFD) is being used for modelling ship flows due to the advances in computational methods. The aim of this paper is to predict the pressures and resistance characteristics of a high-speed planing craft equipped with an interceptor. The data regarding trim and resistance is generated for a planing hull with interceptor using CFD. In view of the above, an interceptor with 1 mm height is used to study the performance of a planing hull and compared with the experimental studies of Savitsky, Steen, and Srikanth. The numerical model predicts favourable trim and reduced drag for the planing hull with an interceptor.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- LCG:
-
Longitudinal centre of gravity
- C f :
-
Schoenherr turbulent friction coefficient
- ∇:
-
Volume of displacement
- ρ :
-
Mass density of water
- Δ:
-
Displacement
- β :
-
Deadrise angle
- V 1 :
-
Average bottom velocity
- V :
-
Forward speed
- h i :
-
Height of interceptor
- CDint_S:
-
Coefficient of drag by Steen
- C Lβ :
-
Lift coefficient for a deadrise surface
- A D :
-
Additional drag force due to interceptor
- b :
-
Maximum beam at chine
- D f :
-
Viscous component of drag
- c :
-
Distance between N and CG
- N :
-
Resultant of pressure forces acting normal to bottom
- τ :
-
Trim angle of keel, deg
- λ :
-
Wetted length to beam ratio
- ε :
-
Turbulent energy dissipation rate
- i :
-
Interceptor height
- L w :
-
Mean wetted length
- Dint_S:
-
Added drag due to interceptor
References
Brizzolara S (2003) Hydrodynamic analysis of interceptors with CFD methods. In: 7th international conference on fast sea transportation
Deng R et al (2011) Preliminary numerical investigation of effect of interceptor on Ship resistance
John S, Kareem Khan MD, Praveen PC, Manu K, Panigrahi PK (2011) Hydrodynamic performance enhancement using stern wedges, stern flaps and interceptors. In: ICSOT
Karimi MH, Abbaspoor M (2015) A study on vertical motions of planing boats with automatically controlled stern interceptors in calm water and waves. Ships and offshore struct 10(3):335–348
Luca FD, Pensa C (2011) Experimental data on interceptor effectiveness. In: IX HSMV, Naples
Salas M, Tampier G (2013) Assessment of appendage effect on forward resistance reduction. Ship Sci Technol 7(13):37–45, July 2013, Cartagena (Colombia)
Savitsky D (1964) The hydrodynamic design of planing hulls. Mar Technol 1(1):71–95
Srikanth S, Datla R (2008) Performance prediction of high-speed planing craft with interceptors using a variation of the Savitsky method. In: The first Chesapeake power boat symposium
Steen (2007) Experimental investigation of interceptor performance. Norwegian University of Science and Technology, Trondheim
Tsai JF, Hwang JL, Chou SK (2004) Study on the compound effects of the interceptor with stern flap for two fast monohulls with transom stern. In: Oceans’04, MTTS/IEEE Tecno-ocean’04, vol 2, pp 1023–1028
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Jangam, S., Anantha Subramanian, V., Krishnankutty, P. (2019). Computational Study on the Hydrodynamic Effects of Interceptors Fitted to Transom of Planing Vessel. In: Murali, K., Sriram, V., Samad, A., Saha, N. (eds) Proceedings of the Fourth International Conference in Ocean Engineering (ICOE2018). Lecture Notes in Civil Engineering, vol 22. Springer, Singapore. https://doi.org/10.1007/978-981-13-3119-0_39
Download citation
DOI: https://doi.org/10.1007/978-981-13-3119-0_39
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3118-3
Online ISBN: 978-981-13-3119-0
eBook Packages: EngineeringEngineering (R0)