Abstract
Recently, Indian government enforces stringent control standards for automotive emissions in order to minimise pollution and keep the environment green. To confirm these emission norms, new advanced technologies have been developed in the automotive emissions after treatment systems market. Diesel oxidation catalyst is one of the important contraptions which play a major role in reducing CO and unburned HC emissions. By employing CFD software, the flow properties of catalytic converter can be analysed. This helps to optimise the surface area of DOC, and the effective reaction area is utilised for oxidising the unburned hydrocarbon and carbon monoxide of engine exhaust gases. In the present work, 0.8-litre DOC has been modelled in CATIA V5 software, and CFD analysis was executed by ANSYS CFX software. The pressure drop has been compared by varying the cell density and wall thickness. Finally, the results are compared and the parameters of substrate which give optimum pressure drop are established and concluded. The novelty of the present work is that wall thickness of the porous media substrate, which is in mill inch, has been considered to find out the pressure drop. Calculated pressure drop is verified with engine test bed pressure drop experimental data, before concluding the results.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Kamble, P.R., Ingle, S.S.: Copper plate catalytic converter: an emission control technique. SAE Technical Paper 2008-28-0104 (2008)
Hayes, R.E., Fadic, A., Mmbaga, J., Najafi, A.: CFD modelling of the automotive catalytic converter. Catal. Today 188(1), 94–105 (2012)
Hayes, R.E., Kolaczkowski, S.T., Thomas, W.J.: A finite element model for a catalytic monolith reactor. Comput. Chem. Eng. 16(7), 645–657 (1992)
Zygourakis, K.: Transient operation of monolith catalytic converters: a two-dimensional reactor model and the effects of radially nonuniform flow distributions. Chem. Eng. Sci. 44(9), 2075–2086 (1989)
Tischer, S., Deutschmann, O.: Recent advances in numerical modeling of catalytic monolith reactors. Catal. Today 105(3–4), 407–413 (2005)
Braun, J., Hauber, T., Tobben, H., Windmann, J., Zacke, P., Chatterjee, D., Correa, C., Deutschmann, O., Maier, L., Tischer, S., Warnatz, J.: Three-dimensional simulation of the transient behavior of a three-way catalytic converter. SAE Technical Paper 2002-01-0065 (2002)
Jeong, S., Kim, W.: A study on the optimal monolith combination for improving flow uniformity and warm-up performance of an auto-catalyst. Chem. Eng. Process. 42(11), 879–895 (2003)
Ramanathan, K., West, D.H., Balakotaiah, V.: Optimal design of catalytic converters for minimizing cold-start emissions. Catal. Today 98(3), 357–373 (2004)
Weilenmann, M.: Aspects of highly transient catalyst simulation. Catal. Today 188(1), 121–134 (2012)
Gundlapally, S.R., Balakotaiah, V.: Analysis of the effect of substrate material on the steady-state and transient performance of monolith reactors. Chem. Eng. Sci. 92, 198–210 (2013)
Jeong, S., Kim, T.: CFD investigation of the 3-dimensional unsteady flow in the catalytic converter. SAE Technical Paper 971025 (1997)
Ekstrom, F., Andersson, B.: Pressure drop of monolithic catalytic converters experiments and modeling. SAE Technical Paper 2002-01-1010 (2002)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Om Ariara Guhan, C.P., Arthanareeswaran, G. (2019). Flow Analysis of Catalytic Converter—LCV BS III Applications for Optimising Pressure Drop. In: Chandrasekhar, U., Yang, LJ., Gowthaman, S. (eds) Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-2718-6_41
Download citation
DOI: https://doi.org/10.1007/978-981-13-2718-6_41
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-2717-9
Online ISBN: 978-981-13-2718-6
eBook Packages: EngineeringEngineering (R0)