Abstract
Renewable resourced polymer composites from vegetable oils and bio-fibers are receiving increasing attention from various industries due to their characteristics of being less heavy, environment friendly, and biodegradable. Lignocellulosic natural fibers have immense potential to be used as reinforcing fillers due to their characteristics of being less expensive, abundant obtainability, lower density, higher specific strength and modulus, and good interfacial strength with thermoset polymers. In this chapter, epoxidized nonedible linseed and castor oils are proposed as a diluent to petro-based epoxy in formulating toughened bio-based copolymers. Unidirectional sisal fibers were reinforced within a network of such bio-epoxy copolymers in order to achieve an optimal stiffness–toughness balance. Cardanol based phenalkamine, a bio-renewable crosslinker, is used to develop well toughened sustainable and green composite materials. The composites were subjected to various thermal, mechanical, dynamic mechanical, and morphological tests to investigate the impact of nonedible epoxidized oils and sisal fibers in addition to the petro-based epoxy matrix. The present study shows the method for design and development of novel sustainable green composites with higher bio-source content (>65%) meant for shock absorbing applications. These green materials may find good space in making high-performance engineering applications in automotive, structural, construction, and building sectors.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Wool RP, Sun XS (2005) Bio-based polymers and composites. Elsevier Science and Technology Book
Gandini A (2008) Polymers from renewable resources: a challenge for the future of macromolecular materials. Macromolecules 41(24):9491–9504
Raquez JM, Deléglise M, Lacrampe MF, Krawczak P (2010) Thermosetting bio-materials derived from renewable resources. A critical review. Prog Polym Sci 35:487–509
Suttie E (2012) Bio-resins in construction: a review of current and future developments. BRE publications, UK
Holbery J, Houston D (2006) Natural-fiber-reinforced polymer composites in automotive applications, JOM 58(11):80–86
Auvergne R, Caillol S, David G, Boutevin B, Pascault JP (2014) Biobased thermosetting epoxy: present and future. Chem Rev 114(2):1082–1115
Guner FS, Yagci Y, Erciyes AT (2006) Polymers from triglyceride oils. Prog Polym Sci 31(7):633–670
Meier MAR, Metzger JO, Schubert US (2007) Plant oil renewable resources as green alternatives in polymer science. Chem Soc Rev 36(11):1788–1802
Lu Y, Larock RC (2009) Novel polymeric materials from vegetable oils and vinyl monomers: preparation, properties, and applications. Chemsuschem 2(2):136–147
Mercangoz M, Kusefoglu S, Akman U, Hortacsu O (2004) Polymerization of soybean oil via permanganate oxidation with sub/superciritical CO2. Chem Eng Process 43:1015–1027
Lligadas G, Ronda JC, Galia M, Cadiz V (2013) Renewable polymeric materials from vegetable oils. Mater Today 16:337–343
Ronda JC, Lligadas G, Galia M, Cadiz V (2011) Vegetable oils as platform chemicals for polymer synthesis. Eur J Lipid Sci Technol 113(1):46–58
Ronda JC, Lligadas G, Galia M, Cadiz V (2013) A renewable approach to thermosetting resins. React Funct Polym 7:381–395
Mittal V (2012) Renewable polymers: synthesis, processing and technology. John Wiley and Sons, Scrivener Publishing LLC
Xia Y, Larock RC (2010) Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem 12:1893–1909
Mallegol J, Lemaire J, Gardette JL (2000) Drier influence on the curing of linseed oil. Prog Org Coat 39(2–4):107–113
Guler OK, Guner FS, Erciyes AT (2004) Some empirical equations for oxypolymerization of linseed oil. Prog Org Coat 51:365–371
Keles E, Hazer B (2008) Autooxidized polyunsaturated oils/oily acids: post-it Applications and Reactions with Fe (III) and adhesion properties. Macromol Symp 269:154–160
Robertson ML, Chang KH, Gramlich WM, Hillmyer MA (2010) Toughening of polylactide with polymerized soybean oil. Macromolecules 43:1807–1814
Andjelkovic DD, Valverde M, Henna P, Li FK, Larock RC (2005) Novel thermosets prepared by cationic copolymerization of various vegetable oils synthesis and their structure property relationships. Polymer 46:9674–9685
Li FK, Larock RC (2001) New soybean oil styrene divinylbenzene thermosetting copolymers. I. Synthesis and characterization. J Appl Polym Sci 80:658–670
Patil H, Wagmare J (2013) Catalyst for epoxidation of oils: a review. Discovery 3(7):10–14
Gerhard K, Johannes TPD (1999) Recent developments in the synthesis of fatty acid derivatives. AOCS Press USA, p 157
Warwel S, Klaas MRG (1995) Chemo-enzymatic epoxidation of unsaturated carboxylic acids. J Molecular Catalysis B: Enzymatic 1:29–35
Okieimen FE, Bakare OI, Okieimen CO (2002) Studies on the epoxidation of rubber seed oil. Ind Crop Prod 15(2):139–144
Goud VV, Patwardhan AV, Pradhan NC (2006) Studies on the epoxidation of mahua oil Madhumica indica by hydrogen peroxide. Bioresource Technol 97:1365–1371
Goud VV, Pradhan NC, Patwardhan AV (2006) Epoxidation of karanja pongamia glabra oil by hydrogen peroxide. J Am Oil Chem Soc 83:635–640
Dinda S, Patwardhan AV, Goud VV, Pradhan NC (2008) Epoxidation of cottonseed oil by aqueous hydrogen peroxide catalysed by liquid inorganic acids. Bioresource Technol 99:3737–3744
Meyer PP, Techaphattana N, Manundawee S, Sangkeaw S, Junlakan W, Tongurai C (2008) Epoxidation of soybean oil and jatropha oil. Thammasat Int J Sci Tech 13:1–5
Cai C, Dai H, Chen R, Su C, Xu X, Zhang S, Yang L (2008) J Lipid Sci Technol 110:341–346
Petrivic ZS, Zlatanic A, Lava CC, Sinadinovic-Fiser S (2002) Epoxidation of soybean oil in toluene with peroxoacetic and peroxoformic acids-kinetics and side reactions. Euro J Lipid Sci Technol 104:293–299
Goud VV, Patwardhan AV, Dinda S, Pradhan NC (2007) Epoxidation of karanja (Pongamia glabra) oil catalysed by acidic ion exchange resin. Europ J Lipid Sci Technol 109:575–584
Mungroo R, Pradhan NC, Goud VV, Dalai AK (2008) Epoxidation of canola oil with hydrogen peroxide catalyzed by acidic ion exchange resin. J Am Oil Chem Soc 85:887–896
Sinadinovic F, Jankovic M, Petrovic ZS (2001) Kinetics of in-situ epoxidation of soybean oil in bulk catalysed by ion exchange resin. J Am Oil Chem Soc 78(7):725–731
Parada Hernandez NL, Bonon AJ, Bah JO, Barbosa MIR, Wolf Maciel MR, Filho RM (2016) Epoxy monomers obtained from castor oil using a toxicity-free catalytic system. J Mol Catal A Chem
Dinda S, Goud V, Patwardhan AV, Pradhan NC (2011) Selective epoxidation of natural triglycerides using acidic ion exchange resin as catalyst. Asia-Pacific J Chem Engg 466
Pan X, Sengupta P, Webster DC (2011) Novel biobased epoxy compounds: epoxidized sucrose esters of fatty acids. Green Chem 13:965–975
Kim JR, Sharma S (2012) The development and comparison of bio-thermoset plastics from epoxidized plant oils. Ind Crop Prod 36:485–499
Zhu J, Chandrashekhara K, Flanigan V, Kapila S (2004) Curing and mechanical characterization of a soy-based epoxy resin system. J Appl Polym Sci 91:3513–3518
Holser RA (2008) Transesterification of epoxidized soybean oil to prepare epoxy methyl esters. Ind Crop Prod 27:130–132
Martini DS, Braga BA, Samios D (2009) On the curing of linseed oil epoxidized methyl esters with different cyclic dicarboxylic anhydrides. Polymer 50:2919–2925
Reiznautt QB, Garcia ITS, Samios D (2009) Oligoesters and polyesters produced by the curing of sunflower oil epoxidized biodiesel with cis-cyclohexane dicarboxylic anhydride: Synthesis and characterization. Mater Sci Eng C 29:2302–2311
Nicolau A, Mariath RM, Martini EA, Martini DS, Samios D (2010) The polymerization products of epoxidized oleic acid and epoxidized methyl oleate with cis-1,2 cyclohexanedicarboxylic anhydride and triethylamine as the initiator: Chemical structures, thermal and electrical properties. Mater Sci Eng C 30:951–962
Mustata F, Nita T, Bicu I (2014) The curing reaction of epoxidized methyl esters of corn oil with Diels-Alder adducts of resin acids. The kinetic study and thermal characterization of crosslinked products. J Anal Appl Pyrolysis 108:254–264
Wang R, Schuman TP (2013) Vegetable oil-derived epoxy monomers and polymer blends: a comparative study with review. eXP Polym Lett 7:272–292
Behera D, Banthia AK (2008) Synthesis, characterization, and kinetics Study of thermal decomposition of epoxidized soybean oil acrylate. J Appl Polym Sci 109:2583–2590
Fu L, Yang L, Dai C, Zhao C, Ma L (2010) Thermal and mechanical properties of acrylated expoxidized-soybean oil-based thermosets. J Appl Polym Sci 117:2220–2225
Li Y, Fu L, Lai S, Cai X, Yang L (2010) Synthesis and characterization of cast resin based on different saturation epoxidized soybean oil Eur. J Lipid Sci Technol 112:511–516
Rengasamy S, Mannari V (2013) Development of soy-based UV-curable acrylate oligomers and study of their film properties. Prog Org Coatings 76:78–85
Zhang P, Zhang J (2013) One-step acrylation of soybean oil (SO) for the preparation of SO-based macromonomers. Green Chem 15:641
Esen H, Küsefoğlu S, Wool R (2007) Photolytic and free-radical polymerization of monomethyl maleate esters of epoxidized plant oil triglycerides. J Appl Polym Sci 103(1):626–633
Esen H, Küsefoğlu SH (2003) Photolytic and free-radical polymerization of cinnamate esters of epoxidized plant oil triglycerides. J Appl Polym Sci 89(14):3882–3888
Can E, Küsefoğlu S, Wool RP (2001) Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleates. J Appl Polym Sci 81(1):69–77
Wang CS, Yang LT, Ni BL, Shi G (2009) Polyurethane networks from different soy-based polyols by the ring opening of epoxidized soybean oil with methanol, glycol, and 1,2-propanediol. J Appl Polym Sci 114(1):125–131
Dai H, Yang LT, Lin B, Wang CS, Shi G (2009) Synthesis and characterization of the different soy-based polyols by ring opening of epoxidized soybean oil with methanol, 1,2-ethanediol and 1,2-propanediol. J Am Oil Chem Soc 86(3):261–267
Sahoo SK, Khandelwal V, Manik G (2018) Development of completely bio-based epoxy networks derived from epoxidized linseed and castor oil cured with citric acid. Polym Adv Technol. https://doi.org/10.1002/pat.4316
Yim YJ, Rhee KY, Park SJ (2017) Fracture toughness and ductile characteristics of diglycidyl ether of bisphenol-A resins modified with biodegradable epoxidized linseed oil, Compos Part B Eng 131:144–152
Espana JM, Nacher LS, Boronat T, Fombuena V, Balart R (2012) Properties of biobased epoxy resins from epoxidized soybean oil (ESBO) cured with maleic anhydride (MA). J Am Oil Chem Soc 89(11):2067–2075
Liu Z, Erhan SZ (2010) Ring-opening polymerization of epoxidized soybean oil. J Am Oil Chem Soc 87(4):437–444
Park SJ, Jin FL, Lee JR (2004) Synthesis and thermal properties of epoxidized vegetable oil. Macromol Rapid Commun 25(6):724–727
Jin FL, Park SJ (2007) Thermal and rheological properties of vegetable oil-based epoxy resins cured with thermally latent initiator. J Ind Eng Chem 13(5):808–814
Unnikrishnan KP, Thachil ET (2006) Toughening of epoxy resins. Des Monomers Polym 9(2):129–152
Thomas R, Yumei D, Yuelong H, Moldenaers Y, Le P, Weimin Y, Czigany T, Thomas S (2008) Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber. Polymer 49:278–294
Zhang C, Xia Y, Chen R, Huh S, Johnston P, Kessler MR (2013) Soy-castor oil based polyols prepared using a solvent-free and catalyst-free method and polyurethanes therefrom. Green Chem 15(6):1477
Jin FL, Park SJ (2008) Thermomechanical behavior of epoxy resins with epoxidized vegetable oil. Polym Int 57:577–583
Tan SG, Chow WS (2010) Thermal properties, fracture toughness and water absorption of epoxy-palm oil blends. Polymer-Plastics Technol Eng 49(9):900–907
Tan SG, Chow WS (2010) Biobased epoxidized vegetable oils and its greener epoxy blends: a review. Polym Plast Technol Eng 49:900–907
Sahoo SK, Mohanty S, Nayak SK (2015) Synthesis and characterization of bio-based epoxy blends from renewable resource based epoxidized soybean oil as reactive diluent. Chi J Polym Sci 33(1):137–152
Debnath D, Khatua BB (2011) Preparation by suspension polymerization and characterization of polystyrene (PS)-poly(methyl methacrylate) (PMMA) core-shell nanocomposites. Macromol Res 19(6):519–527
Ganan P, Garbizu S, Ponte RL, Mondragon I (2005) Surface modification of sisal fibers: effects on the mechanical and thermal properties of their epoxy composites. Polym Composites 26(2):121–127
Sahoo SK, Mohanty S, Nayak SK (2015) Toughened bio-based epoxy blend network modified with transesterified epoxidized soybean oil: synthesis and characterization. RSC Adv 5:13674–13691. https://doi.org/10.1039/C4RA11965G
Muturi P, Wang D, Dirlikov S (1994) Epoxidized vegetable oils as reactive diluents I. Comparison of vernonia, epoxidized soybean and epoxidized linseed oils. Prog Org Coat 25:85–94
Ratna D (2001) Mechanical properties and morphology of epoxidized soybean-oil-modified epoxy resin. Polym Int 50:179–184
Park SJ, Jin FL, Lee JR (2004) Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil. Mater Sci Eng A 374(1–2):109–114
Park SJ, Jin FL, Lee JR (2004) Effect of biodegradable epoxidized castor oil on physicochemical and mechanical properties of epoxy resins. Macromol Chem Phys 205:2048–205
Jin FL, Park SJ (2008) Impact-strength improvement of epoxy resins reinforced with a biodegradable polymer. Mater Sci Eng A 478(1–2):402–405
Miyagawa H, Mohanty AK, Misra M, Drzal LT (2004) Thermo-physical and impact properties of epoxy containing epoxidized linseed oil 1. Macromol Mater Eng 289(7):629–635
Miyagawa H, Mohanty AK, Misra M, Drzal LT (2004) Thermo-physical and impact properties of epoxy containing epoxidized linseed oil 2. Macromol Mater Eng 289(7):636–641
Miyagawa H, Misra M, Drzal LT, Mohanty AK (2005) Fracture toughness and impact strength of anhydride-cured biobased epoxy. Polym Eng Sci 45:487–495
Tan SG, Chow WS (2010) Thermal properties of anhydride-cured bio-based epoxy blends. J Therm Anal Calorim 101(3):1051–1058
Altuna FI, Esposito LH, Ruseckaite RA, Stefani PM (2011) Thermal and mechanical properties of anhydride-cured epoxy resins with different contents of biobased epoxidized soybean oil. J Appl Polym Sci 120:789–798
Altuna FI, Pettarin V, Martin L, Retegi A, Mondragon I, Ruseckaite RA, Stefani PM (2014) Copolymers based on epoxidized soy bean oil and diglycidyl ether of bisphenol A: relation between morphology and fracture behavior polym. Eng Sci 54:569
Chen Y, Yang L, Wu J, Ma L, Finlow DE, Song SLK (2013) Thermal and mechanical properties of epoxy resin toughened with epoxidized soybean oil. J Therm Anal Calorim 113(2):939–945
Mustata F, Tudorachi N, Rosu D (2011) Curing and thermal behavior of resin matrix for composites based on epoxidized soybean oil/diglycidyl ether of bisphenol A. Composite: Part B 42(7):1803–1812
Mohanty AK, Misra M, Drzal LT (2005) Natural fibers, biopolymers, and biocomposites [chapter 2]. CRC Press, Taylor & Francis Group, New York
O’Donnell A, Dweib MA, Wool RP (2004) Natural fiber composites with plant oil-based resin. Compos Sci Technol 64:1135–1145
Liu Z, Erhan SZ, Barton FE, Akin DE (2006) Green composites from renewable resources: preparation of epoxidized soybean oil and flax fiber composites. J Agric Food Chem 54:2134–2137
Tran P, Graiver D, Narayan R (2006) Biocomposites synthesized from chemically modified soy oil and biofibers. J Appl Polym Sci 102:69–75
Boquillon N (2006) Use of an epoxidized oil-based resin as matrix in vegetable fibers-reinforced composites. J Appl Polym Sci 101:4037–4043
Lee KY, Ho KKC, Schlufter K, Bismarck A (2012) Hierarchical composites reinforced with robust short sisal fibre performs utilising bacterial cellulose as binder. Compos Sci Technol 72:1479–1486
Bertomeu D, Sanoguerab DG, Fenollar O, Boronat T, Balart R (2012) Polym Compos 33:683
Zhu J, Chandrashekhara K, Flanigan V, Kapila S (2004) Manufacturing and mechanical properties of soy-based composites using pultrusion. Compos A 35:95–101
Sahoo SK, Mohanty S, Nayak SK (2015) Study on the effect of woven sisal fiber mat on mechanical and viscoelastic properties of petroleum based epoxy and bioresin modified toughened epoxy network. J Appl Polym Sci 42699:n/a-n/a. https://doi.org/10.1002/app.42699
Faruk O, Bledzki AK, Fink HP, Sain M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 37:1552–1596
Harris B (1999) Engineering composite materials. The Cambridge University Press, London
Joshi SV, Drzal LT, Mohanty AK, Arora S (2004) Are natural fiber composites environmentally superior to glass fiber reinforced composites? Compos A 35:371–376
Thakur VK, Thakur MK (2014) Processing and characterization of natural cellulose fibers/thermoset polymer composites. Carbohyd Polymer 109:102–117
Satyanarayana KG, Arizaga GGC, Wypych F (2009) Biodegradable composites based on lignocellulosic fibers-an overview. Prog Polym Sci 34:982–1021
Mallick PK (2007) Fiber reinforced composites; materials, manufacturing and design. Taylor & Francis, New York
Mosiewicki MA, Aranguren MI (2013) A short review on novel biocomposites based on plant oil precursors. Eur Polym J 49:1243–1256
Niedermann P, Szebenyi G, Toldy A (2017) Effect of epoxidized soybean oil on mechanical properties of woven jute fabric reinforced aromatic and aliphatic epoxy resin composites. Polym Compos 38:884–892. https://onlinelibrary.wiley.com/doi/abs/10.1002/pc.23650
Sahoo SK, Khandelwal V, Manik G (2018) Influence of epoxidized linseed oil and sisal fibers on structure–property relationship of epoxy biocomposite. Polym Compos. https://doi.org/10.1002/pc.24857
Judith D, Espinoza P, Brent AN, Darrin MH, Zhigang CCA, Ulven DPW (2011) Comparison of curing agents for epoxidized vegetable oils applied to composites. Polym Compos 32(11):1806–1816
Kunduru KR, Basu A, Haim Zada M, Domb AJ (2015) Castor oil-based biodegradable polyesters. Biomacromolecules 16(9):2572–2587
Petrovic ZS (2010) Polymers from biological oils. Contemp Mater 1(1):39–50
Espinosa LMD, Meier MAR (2011) Plant oils: the perfect renewable resource for polymer science. Euro Polym J 47(5):837–852
Lu J, Khot S, Wool RP (2005) New sheet molding compound resins from soybean oil. I. Synthesis and characterization. Polymer 46:71–80
Zhu J, Chandrashekhara K, Flanigan V, Kapila S (2004) Curing and mechanical characterization of a soy-based epoxy resin system. J Appl Polym Sci 91:3513–3518
Shabeer A, Garg A, Sundararaman S, Chandrashekhara K, Flanigan V, Kapila S (2005) Dynamic mechanical characterization of a soy based epoxy resin system. J Appl Polym Sci 98(4):1772–1780
Shabeer A, Sundararaman S, Chandrashekhara K, Dharani LR (2007) Physicochemical properties and fracture behavior of soy-based resin. J Appl Polym Sci 105:656–663
Grishchuk S, Kocsis KJ (2012) Modification of vinyl ester and vinyl ester-urethane resin-based bulk molding compounds (BMC) with acrylated epoxidized soybean and linseed oils. J Mater Sci 47(7):3391–3399
Park SJ, Jin FL, Lee JR (2004) Effect of biodegradable epoxidized castor oil on physicochemical and mechanical properties of epoxy resins. Macromol Chem Phys 205(15):2048–2054
Haq M, Burgueño R, Mohanty AK, Misra M (2008) Hybrid bio-based composites from blends of unsaturated polyester and soybean oil reinforced with nanoclay and natural fibers. Compos Sci Technol 68:3344–3351
Ramamoorthy SK, Di Q, Adekunle K, Skrifvars M (2012) Effect of water absorption on mechanical properties of soybean oil thermosets reinforced with natural fibers. J Reinf Plastics Compos 31(18):1191–1200
Li Y, Mai YW, Ye L (2000) Sisal fibre and its composites: a review of recent developments. Compos Sci Technol 60:2037–2055
Sahoo SK, Khandelwal V, Manik G (2015) Effect of lignocellulosic fibers on mechanical, thermomechanical and hydrophilic studies of epoxy modified with novel bioresin epoxy methyl ester derived from soybean oil. Polym Adv Technol. https://doi.org/10.1002/pat.3592
Sahoo SK, Mohanty S, Nayak SK (2016) Dynamic mechanical and interfacial properties of sisal fiber reinforced composite with epoxidized soybean oil based epoxy matrix. Polym Compos. https://doi.org/10.1002/pc.24168
Badrinath R, Senthilvelan T (2014) Comparative investigation on mechanical properties of banana and sisal reinforced polymer based composite. Procedia Mater Sci 5:2263–2272
Hodzic A, Shanks R (2014) Wood head natural fibre composites materials, processes and applications publishing limited [chapter 9], pp 233–270
Åkesson D, Skrifvars M, Walkenstrom P (2009) Preparation of thermoset composites from natural fibres and acrylate modified soybean oil resins. J Appl Polym Sci 114:2502–2508
Adekunle K, Cho SW, Ketzscher R, Skrifvars M (2012) Mechanical properties of natural fiber hybrid composites based on renewable thermoset resins derived from soybean oil for use in technical applications. J Appl Polym Sci 124:4530–4541
Adekunle K, Patzelt C, Kalantar A, Skrifvars M (2011) Mechanical and viscoelastic properties of soybean oil thermoset reinforced with jute fabrics and carded lyocell fiber. J Appl Polym Sci 2855–2863
Manthey NW, Cardona F, Francucci G, Aravinthan T (2013) Thermo-mechanical properties of epoxidized hemp oil-based bioresins and biocomposites. J Reinf Plast Compos 32:1444–1456
Fejos M, Karger KJ, Grishchuk S (2013) Effects of fibre content and textile structure on dynamic-mechanical and shape-memory properties of ELO/flax biocomposites. J Reinf Plast Compos 32(24):1879–1886
Marrot L, Bourmaud A, Bono P, Baley C (2014) Multi-scale study of the adhesion between flax fibers and biobased thermoset matrices. Mater Design 62:47–56
Rana A, Evitts RW (2015) Development and characterization of flax fiber reinforced biocomposite using flaxseed oil-based bio-resin. J Appl Polym Sci 132:41807
Ding C, Matharu AS (2014) Recent developments on biobased curing agents: a review of their preparation and use. ACS Sustain Chem Eng 2:2217–2236. https://doi.org/10.1021/sc500478f
Sahoo SK, Khandelwal V, Manik G (2017) Development of toughened bio-based epoxy with epoxidized linseed oil as reactive diluent and cured with bio-renewable crosslinker. Polym Adv Technol:1–10. https://doi.org/10.1002/pat.4166
Pathak SK, Rao BS (2006) Structural effect of phenalkamines on adhesive viscoelastic and thermal properties of epoxy networks. J Appl Polym Sci 102:4741–4748. https://doi.org/10.1002/app.25005
Voirin C, Caillol S, Sadavarte NV, Tawade BV, Boutevin B, Wadgaonkar PP (2014) Functionalization of cardanol: towards biobased polymers and additives. Polym Chem 5:3142–3162. https://doi.org/10.1039/c3py01194a
Khandelwal V, Sahoo SK, Kumar A, Manik G (2018) Electrically conductive green composites based on epoxidized linseed oil and polyaniline: an insight into electrical, thermal and mechanical properties. Compos Part B Eng 136:149–157
Sacristan M, Ronda JC, Galia Ma, Cadiz V (2010) Synthesis and properties of boron-containing soybean oil based thermosetting copolymers. Polymer 51:6099–6106
Prasad AVR, Rao KM (2011) Mechanical properties of natural fibre reinforced polyester composites: Jowar sisal and bamboo. Mater Design 32(8–9):4658–4663
Acknowledgements
Science and Engineering Research Board (SERB), Government of India is highly acknowledged for NPDF funding support (File number: PDF/2015/000705).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Sahoo, S.K., Khandelwal, V., Manik, G. (2019). Sisal Fibers Reinforced Epoxidized Nonedible Oils Based Epoxy Green Composites and Its Potential Applications. In: Muthu, S. (eds) Green Composites. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-13-1972-3_3
Download citation
DOI: https://doi.org/10.1007/978-981-13-1972-3_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-1971-6
Online ISBN: 978-981-13-1972-3
eBook Packages: EngineeringEngineering (R0)