Abstract
Green production and sustainable development are the pressing concerns of the twenty-first century. By the growing amount of wastes generated from many practices, there has been a growing consideration in the utilisation of wastes in the production of sustainable composite materials such as concrete composites to attain possible benefits. In the construction industries, the idea of sustainability inspires the usage of waste materials to replace raw resources, such as cement, aggregates and fibrous materials. This leads to sustainable, green and eco-friendly construction by decreasing the cost and natural resources related to disposing of the waste materials. This chapter highlights the outcomes of an experimental examination on the performance of green concrete composites comprising industrial waste polypropylene carpet fibres and palm oil fuel ash (POFA). Six different concrete mixes containing 20-mm-long carpet fibre at dosages of 0–1.25% were made with ordinary Portland cement (OPC). Additional six concrete mixes containing 20% POFA with the same fibre dosages were made. Concrete composite specimens then were tested for fresh and hardened state properties. It has been found that by adding carpet fibres the workability of composite mixes was reduced. Besides, the compressive strength of concrete composites did not improve by the addition of carpet fibres. However, the positive interaction amongst carpet fibre and POFA leads to lesser drying shrinkage, higher flexural and tensile strengths, thereby enhancing the ductility of concrete composites with higher energy absorption and impact resistance and, therefore, developed crack distribution. The water absorption and depth of chloride penetration of the concrete composites were significantly reduced with the inclusion of waste carpet fibre. The results further reveal that the replacement of POFA significantly influenced on the durability characteristics of concrete composites at extended curing times. The outcomes of this study proposed that the employment of industrial waste carpet fibre together with POFA in the production of sustainable and green concrete composites is viable technically and environmentally.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Akça KR, Çakır Ö, Ipek M (2015) Properties of fiber reinforced concrete using recycled aggregates. Constr Build Mater 98:620–630
Aldahdooh MAA, Bunnori NM, Johari MAM (2014) Influence of palm oil fuel ash on ultimate flexural and uniaxial tensile strength of green ultra-high performance fiber reinforced cementitious composites. Mater Des 54:694–701
Alhozaimy A, Soroushiad P, Mirza F (1996) Mechanical properties of polypropylene fiber reinforced concrete and the effects of pozzolanic materials. Cement Concr Compos 18:85–92
Al-mulali MZ, Awang H, Khalil HA, Aljoumaily ZS (2015) The incorporation of oil palm ash in concrete as a means of recycling: a review. Cement Concr Compos 55:129–138
Awal ASMA, Hussin MW (1997) The effectiveness of palm oil fuel ash in preventing expansion due to alkali-silica reaction. Cement Concr Compos 19:367–372
Awal ASMA, Mohammadhosseini H (2016) Green concrete production incorporating waste carpet fiber and palm oil fuel ash. J Clean Prod 137:157–166
Batayneh M, Marie I, Asi I (2007) Use of selected waste materials in concrete mixes. Waste Manag 27(12):1870–1876
Bentur A, Mindess S (2007) Fibre reinforced cementitious composites. Taylor & Francis, London
Bird L (2013) Carpet recycling UK. In: Carpet recycling UK conference, London
Booij M, Hendrix JAJ, Frentzen YH (1997) Process for recycling polyamide-containing carpet waste. Eur Pat 759:456
Brandt AM (2008) Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering. Compos Struct 86(1):3–9
Chandra S (1997) Waste materials used in concrete manufacturing. Noyes Publications, New Jersey
Chindaprasirt P, Rukzon S, Sirivivatnanon V (2008) Resistance to chloride penetration of blended Portland cement mortar containing palm oil fuel ash, rice husk ash and fly ash. Constr Build Mater 22(5):932–938
Ghosni N, Samali B, Vessalas K (2013) Evaluation of mechanical properties of carpet fibre reinforced concrete. From materials to structures: advancement through innovation. Taylor and Francis Group, London, pp 275–279
Gu L, Ozbakkaloglu T (2016) Use of recycled plastics in concrete: a critical review. Waste Manag 51:19–42
Hawn KL (2001) An overview of commercial recycling technologies and textile applications for the products. In: Presentation at 6th annual conference on recycling of polymer, Textile and Carpet Waste, Dalton
Hsie M, Tu C, Song PS (2008) Mechanical properties of polypropylene hybrid fiber-reinforced concrete. Mater Sci Eng, A 494(1–2):153–157
Ismail M, Ismail ME, Muhammad B (2011) Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash. Constr Build Mater 25(5):2358–2364
Kanadasan J, Abdul Razak H (2015) Engineering and sustainability performance of self-compacting palm oil mill incinerated waste concrete. J Clean Prod 89:78–86
Karahan O, Atiş CD (2011) The durability properties of polypropylene fiber reinforced fly ash concrete. Mater Des 32(2):1044–1049
Liu J, Xing F, Dong B, Ma H, Pan D (2014) Study on water sorptivity of the surface layer of concrete. Mater Struct 47(11):1941–1951
Martínez-Barrera G, Vigueras-Santiago E, Hernández-López S, Brostow W, Menchaca-Campos C (2005) Mechanical improvement of concrete by irradiated polypropylene fibers. Polym Eng Sci 45(10):1426–1431
Mastali M, Dalvand A, Sattarifard A (2016) The impact resistance and mechanical properties of self-compacting concrete reinforced with recycled CFRP pieces. J Clean Prod 124:312–324
Meddah MS, Bencheikh M (2009) Properties of concrete reinforced with different kinds of industrial waste fibre materials. Constr Build Mater 23(10):3196–3205
Mo KH, Alengaram UJ, Jumaat MZ, Liu MYJ (2015) Contribution of acrylic fibre addition and ground granulated blast furnace slag on the properties of lightweight concrete. Constr Build Mater 95:686–695
Mohammadhosseini H, Awal ASMA (2013) Physical and mechanical properties of concrete containing fibers from industrial carpet waste. Int J Res Eng Technol 2(12):464–468
Mohammadhosseini H, Yatim JM (2017) Microstructure and residual properties of green concrete composites incorporating waste carpet fibers and palm oil fuel ash at elevated temperatures. J Clean Prod 144:8–21
Mohammadhosseini H, Awal ASMA, Sam ARM (2016) Mechanical and thermal properties of prepacked aggregate concrete incorporating palm oil fuel ash. Sādhanā 41(10):1235–1244
Mohammadhosseini H, Yatim JM, Sam ARM, Awal ASMA (2017) Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash. J Clean Prod 144:448–458
Mohammadhosseini H, Tahir MM, Sam ARM, Lim NHAS, Samadi M (2018) Enhanced performance for aggressive environments of green concrete composites reinforced with waste carpet fibers and palm oil fuel ash. J Clean Prod 185:252–265
Nili M, Afroughsabet V (2010) The effects of silica fume and polypropylene fibers on the impact resistance and mechanical properties of concrete. Constr Build Mater 24:927–933
Putman BJ, Amirkhanian SN (2004) Utilization of waste fibers in stone matrix asphalt mixtures. Resour Conserv Recycl 42(3):265–274
Ranjbar N, Behnia A, Alsubari B, Birgani PM, Jumaat MZ (2016) Durability and mechanical properties of self-compacting concrete incorporating palm oil fuel ash. J Clean Prod 112:723–730
Şahmaran M, Özbay E, Yücel HE, Lachemi M, Li VC (2011) Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures. J Mater Civ Eng 23(12):1735–1745
Schmidt H, Cieslak M (2008) Concrete with carpet recyclates: suitability assessment by surface energy evaluation. Waste Manag 28:1182–1187
Seleem HEDH, Rashad AM, El-Sabbagh BA (2010) Durability and strength evaluation of high-performance concrete in marine structures. Constr Build Mater 24(6):878–884
Siddique R, Khatib J, Kaur I (2008) Use of recycled plastic in concrete: a review. Waste Manag 28(10):1835–1852
Song PS, Hwang S, Sheu BC (2005) Strength properties of nylon- and polypropylene-fiber-reinforced concretes. Cem Concr Res 35(8):1546–1550
Sotayo A, Green S, Turvey G (2015) Environmental technology & innovation carpet recycling: a review of recycled carpets for structural composites. Environ Technol Innov 3:97–107
Strzelecki C (2004) Modern solutions for shredding, grinding and repelletizing post-industrial fiber, nonwovens and carpet scrap. In: Presentation at 9th annual conference on recycling of polymer, Textile and Carpet Waste, Dalton
Tangchirapat W, Saeting T, Jaturapitakkul C, Kiattikomol K, Siripanichgorn A (2007) Use of waste ash from palm oil industry in concrete. Waste Manag 27(1):81–88
Tay JH (1990) Ash from oil-palm waste as a concrete material. J Mater Civ Eng 2(2):94–105
Thomas BS, Gupta RC (2013) Mechanical properties and durability characteristics of concrete containing solid waste materials. J Clean Prod 48:1–6
Toutanji HA (1999) Properties of polypropylene fiber reinforced silica fume expansive-cement concrete. Constr Build Mater 13(4):171–177
Ucar M, Wang Y (2011) Utilization of recycled post-consumer carpet waste fibers as reinforcement in lightweight cementitious composites. Int J Clothing Sci Technol 23(4):242–248
Uygunoglu T (2008) Investigation of microstructure and flexural behavior of steel-fiber reinforced concrete. Mater Struct 41:1441–1449
Wang Y (2006) Utilization of recycled carpet waste fibers for reinforcement of concrete and soil. Recycling in textiles. Woodhead Publishing Ltd., Cambridge, pp 1–14
Wang Y (2010) Fiber and textile waste utilization. Waste Biomass Valorization 1(1):135–143
Wang Y, Zureick AH, Cho BS, Scott DE (1994) Properties of fibre reinforced concrete using recycled fibres from carpet industrial waste. J Mater Sci 29(16):4191–4199
Wang Y, Wu HC, Li VC (2000) Concrete reinforcement with recycled fibers. J Mater Civ Eng 12(4):314–319
Yahaghi J, Muda ZC, Beddu SB (2016) Impact resistance of oil palm shells concrete reinforced with polypropylene fibre. Constr Build Mater 123:394–403
Yap SP, Alengaram UJ, Jumaat MZ (2013) Enhancement of mechanical properties in polypropylene- and nylon-fibre reinforced oil palm shell concrete. Mater Des 49:1034–1041
Yap SP, Bu CH, Alengaram UJ, Mo KH, Jumaat MZ (2014) Flexural toughness characteristics of steel–polypropylene hybrid fibre-reinforced oil palm shell concrete. Mater Des 57:652–659
Yin S, Tuladhar R, Sheehan M, Combe M, Collister T (2016) A life cycle assessment of recycled polypropylene fibre in concrete footpaths. J Clean Prod 112:2231–2242
Zhang P, Li Q, Sun Z (2011) Influence of silica fume and polypropylene fiber on fracture properties of concrete containing fly ash. J Reinf Plast Compos: 0731684411431358
Zollo RF (1997) Fiber-reinforced concrete: an overview after 30 years of development. Cement Concr Compos 19(2):107–122
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Mohammadhosseini, H., Md. Tahir, M. (2019). Production of Sustainable Green Concrete Composites Comprising Industrial Waste Carpet Fibres. In: Muthu, S. (eds) Green Composites. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-13-1969-3_2
Download citation
DOI: https://doi.org/10.1007/978-981-13-1969-3_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-1968-6
Online ISBN: 978-981-13-1969-3
eBook Packages: EngineeringEngineering (R0)