Advertisement

Effect of Sheet Thickness and Grain Size on Forming Limit Diagrams of Thin Brass Sheets

  • Dhruv AnandEmail author
  • D. Ravi Kumar
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 757)

Abstract

Various metals and alloys have huge applications in the form of very thin sheets to manufacture parts such as micro metallic components for electronics and MEMS. In manufacturing of metallic components using very thin sheets, the material behaviour changes significantly with miniaturization due to the size effects—the ‘grain size effect’ and the ‘feature/specimen size effect’. Due to this, formability of very thin sheets depends on sheet thickness to grain size ratio (t/d). But, forming limit diagrams use in FE software meant for prediction of failure are plotted without incorporating the grain size effect and the plane strain condition of Forming Limit Diagram (FLD0) is calculated based on strain hardening exponent (n) and sheet thickness (t). In view of this, the present work is aimed at an investigation of grain size effect (t/d) on FLD0 of very thin brass sheets to achieve an improvement in accuracy of formability prediction in FE Analysis (FEA). In the present work, forming limit diagrams of very thin sheet specimens of CuZn36 brass (50–200 μm) have been experimentally determined.

Keywords

Formability Grain size effect Forming limit diagrams 

References

  1. 1.
    Vollertsen, F., Schulze Niehoff, H., Hu, Z.: State of the art in micro forming. Int. J. Mach. Tools Manuf. 46(11), 1172–1179 (2006)CrossRefGoogle Scholar
  2. 2.
    Geiger, M., Vollertsen, F., Kals, R.: Fundamentals on the manufacturing of sheet metal microparts. CIRP Ann.—Manuf. Technol. 45(1), 277–282 (1996)CrossRefGoogle Scholar
  3. 3.
    Geißdörfer, S., Engel, U., Geiger, M.: FE-simulation of micro forming processes applying a mesoscopic model. Int. J. Mach. Tools Manuf. 46(11), 1222–1226 (2006)CrossRefGoogle Scholar
  4. 4.
    Vollertsen, F., Hu, Z., Niehoff, H.S., Theiler, C.: State of the art in micro forming and investigations into micro deep drawing. J. Mater. Process. Technol. 151(1–3), 70–79 (2004)CrossRefGoogle Scholar
  5. 5.
    Cao, J., Krishnan, N., Wang, Z., Lu, H., Liu, W.K., Swanson, A.: Micro forming: experimental investigation of the extrusion process for micropins and its numerical simulation using RKEM. Trans. ASME 126, 642–652 (2004)CrossRefGoogle Scholar
  6. 6.
    Geiger, M., Kleiner, M., Eckstein, R., Tiesler, N., Engel, U.: Micro forming. CIRP Ann.—Manuf. Technol. 50(2), 445–462 (2001)CrossRefGoogle Scholar
  7. 7.
    Ghosh, A., Hecker, S.: Failure in thin sheets stretched over rigid punches. Metall. Mater. Trans. A 6(4), 1065–1074 (1975)CrossRefGoogle Scholar
  8. 8.
    Holmberg, S., Enquist, B., Thilderkvist, P.: Evaluation of sheet metal formability by tensile tests. J. Mater. Process. Technol. 145(1), 72–83 (2004)CrossRefGoogle Scholar
  9. 9.
    Hiam, J., Lee, A.: Factors influencing the forming limit curves of sheet steel. Sheet Metal Ind. 55, 631–643 (1978)Google Scholar
  10. 10.
    Messner, A., Engel, U., Kals, R., Vollertsen, F.: Size effect in the FE-simulation of micro-forming processes. J. Mater. Process. Technol. 45(1–4), 371–376 (1994)CrossRefGoogle Scholar
  11. 11.
    Vollertsen, F., Biermann, D., Hansen, H.N., Jawahir, I.S., Kuzman, K.: Size effects in manufacturing of metallic components. CIRP Ann.—Manuf. Technol. 58(2), 566–587 (2009)CrossRefGoogle Scholar
  12. 12.
    Al-Qureshi, H.A., Klein, A.N., Fredel, M.C.: Grain size and surface roughness effect on the instability strains in sheet metal stretching. J. Mater. Process. Technol. 170(1–2), 204–210 (2005)CrossRefGoogle Scholar
  13. 13.
    Yeh, F.-H., Li, C.-L., Lu, Y.-H.: Study of thickness and grain size effects on material behavior in micro-forming. J. Mater. Process. Technol. 201(1–3), 237–241 (2008)CrossRefGoogle Scholar
  14. 14.
    Mahabunphachai, S., Koç, M.: Investigation of size effects on material behavior of thin sheet metals using hydraulic bulge testing at micro/meso-scales. Int. J. Mach. Tools Manuf. 48(9), 1014–1029 (2008)CrossRefGoogle Scholar
  15. 15.
    Hosford, W., Caddel, R.M.: Metal Forming Mechanics and Metallurgy. Cambridge University Press, Cambridge, MA (2007)CrossRefGoogle Scholar
  16. 16.
    Mellor, P.B.: Sheet metal forming. Int. Metall. Rev. 1, 1–20 (1981)Google Scholar
  17. 17.
    Ghosh, A.K.: The effect of lateral drawing-in on stretch formability. Metal. Eng. Quart. 15, 53–64 (1975)Google Scholar
  18. 18.
    Hecker, S.S.: A cup test for assessing stretchability. Met. Eng. Quart. 14, 30–36 (1974)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Vishwakarma Government Engineering CollegeChandkhedaIndia
  2. 2.Indian Institute of TechnologyDelhiIndia

Personalised recommendations