Abstract
This paper describes an analytical based method for iron losses estimation in switched reluctance motor (SRM), It is based on analytical flux calculation using airgap permeance. This method is compared to finite element method in term of phase inductance and static pole flux linkage calculation. FFT analysis is applied to each part of SRM flux waveforms to extract the amplitude of the flux density harmonics. Iron losses are estimated in each part of the SRM, the major part of the losses are located in the stator, Hysteresis losses are higher than Eddy current losses in the SRM. Infrared camera is used to locate experimentally the thermal signature of all losses.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Chen L, Chen H, Yan W (2017) A fast iron loss calculation model for switched reluctance motors. IET J Electr Power Appl 11(3):478–486 ISSN 1751-8679
Tursini M, Villani M, Fabri G, Di Leonardo L (2017) A switched reluctance motor for aerospace application: design analysis and results. Electr Power Syst Res J 142:74–83
Bouchnaif J, Romary R, Brudny JF, Azizi M (2003) Influence of commutations on switched reluctance motor iron losses. Analytical and experimental studies. In: Proceedings of EPE’2003, Toulouse, France, pp 2–4. ISBN 90-75815-07-7
Materu PN, Krishnan R (1992) Estimation of switched reluctance motor losses. IEEE Trans Ind Appl 28(3):668–678
Hayachi Y, Miller TJE (1995) A new approach to calculating core losses in SRM. IEEE Trans Ind Appl 31(5):1039–1046
Moallem M, Zangiabadi M (2000) Accurate prediction of switched reluctance motor losses. In: ICEM 2000, 28–30 August 2000, Espoo, Finland, pp 1609–1613
Hassanin M, Alrifai MT, Torrey DA (2001) Experimentally verified flux density models for the switched reluctance machine. IEEE Trans Mag 37(5):3818–3824
Lecointe JP, Bouchnaif J, Romary R, Brudny JF (2001) Présentation et validation d’une méthode de détermination analytique du bruit magnétique des MRVDS. In: Electro technique du futur, Nancy, France, pp 183–188
Brudny JF (1997) Modélisation de la denture des machines asynchrones. phénomène de résonance. J Phys III France 7:1009–1023
Lavers JD, Biringer PP, Hollitscher H (1978) A simple method of estimating the minor loop hysteresis loss in thin laminations. IEEE Trans Mag 14:386–388
Calverley SD, Jewell GW, Saunders RJ (2000) Aerodynamic losses in switched reluctance machines. IEE Proc-Electr Power Appl 147(6):443–448
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Bouchnaif, J., Grari, K., Benslimane, A., Haloui, M. (2019). Switched Reluctance Motor Iron Losses Prediction Method. In: Hajji, B., Tina, G.M., Ghoumid, K., Rabhi, A., Mellit, A. (eds) Proceedings of the 1st International Conference on Electronic Engineering and Renewable Energy. ICEERE 2018. Lecture Notes in Electrical Engineering, vol 519. Springer, Singapore. https://doi.org/10.1007/978-981-13-1405-6_40
Download citation
DOI: https://doi.org/10.1007/978-981-13-1405-6_40
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-1404-9
Online ISBN: 978-981-13-1405-6
eBook Packages: EngineeringEngineering (R0)