Abstract
Reconfigurable manufacturing system (RMS) is considered as a major resource of providing variable production capacities and capabilities by different manufacturing companies. For different products needed in small quantities and with short delivery lead time, this is achieved through reconfiguring the system elements over the time. In the present work, various characteristics of RMS have been discussed and formulated. Weighted sum theory has been used for the selection of best manufacturing system. An illustration is given to analyze the applicability of the proposed methodology on a given system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abdi, M.A., Labib, A.W.: A design strategy for reconfigurable manufacturing systems (RMSs) using analytical hierarchical process (AHP): a case study. Int. J. Prod. Res. 41(10), 2273–2299 (2003)
Clark, G.E., Paasch, R.K.: Diagnostic modeling and diagnosability evaluation of mechanical systems. J. Mech. Des. 118(3), 425–431 (1996)
Erschler, J., Lévêque, D., Roubellat, F.: Periodic loading of flexible manufacturing systems, pp. 327–339. IFIP Congress APMS, Bordeaux (1982)
Goyal, K.K., Jain, P.K., Jain, M.: A novel methodology to measure the responsiveness of RMTs in reconfigurable manufacturing system. J. Manuf. Syst. 32(4), 724–730 (2013)
Gumasta, K., Gupta, S.K., Benyoucef, L., Tiwari, M.K.: Developing a reconfigurability index using multi-attribute utility theory. Int. J. Prod. Res. 49(6), 1669–1683 (2011)
Gupta, A., Jain, P.K., Kumar, D.: A novel approach for part family formation using K-means algorithm. Adv. Manuf. 1(3), 241–250 (2013)
Hiltz, K.L.: Scheduling of flexible flowshops. Technical Report LIDS-R-879, Massachusetts Institute of Technology (1979)
Holtta, K., Suh, E.S., De Weck, O.L.: Trade-off between modularity and performance for engineered systems and products. In: Proceedings of the 15th International Conference on Engineering Design, Melbourne, Australia, 15–18 Aug 2005
Kahloul, L., Bourekkache, S., Djouani, K.: Designing reconfigurable manufacturing systems using reconfigurable object Petri nets. Int. J. Comput. Integr. Manuf. 29(8), 889–906 (2016)
Koren, Y., Hu, S.J., Weber, T.W.: Impact of manufacturing system configuration on Performance. CIRP Ann. 47(1), 369–372 (1998)
Koren, Y., Hiesel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G., Van, B.H.: Reconfigurable manufacturing systems. CIRP Ann. 48(2), 527–540 (1999)
Koren, Y., Maler-Speredelozzi, V., Hu, S.J.: Convertibility measures for manufacturing systems. CIRP Ann. Manuf. Technol. 52(1), 367–370 (2003)
Kukushkin, I.K., Katalinic, B., Cesarec, P., Kettler, R.: Reconfiguration in self-organizing systems. In: Proceedings of the 22nd International DAAAM Symposium, vol. 22, no. 1. Vienna, Austria, EU (2011)
Mehrabi, M.G., Ulsoy, K.: Reconfigurable manufacturing systems: key to future manufacturing. J. Intell. Manuf. 11, 403–419 (2000)
Mehrabi, M.G., Ulsoy, A.G., Koren, Y., Heytler, P.: Trends and perspectives in flexible and reconfigurable manufacturing systems. J. Intell. Manuf. 13(2), 135–146 (2002)
Mittal, K.K., Jain, P.K.: Impact of reconfiguration effort on reconfigurable manufacturing system. In: 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Guwahati, Assam, India, 12–14 Dec 2014
Smith, T.M., Steck, K.E.: On the robustness of using balanced part mix ratios to determine cyclic part input sequence into flexible flow systems. Int. J. Prod. Res. 34, 2925–2941 (1996)
Son, S.Y., Olsen, T.L., Hoi, D.Y.: An approach to scalability and line balancing for reconfigurable manufacturing systems. Integr. Manuf. Syst. 12(7), 500–511 (2011)
Steck, K.E.: Procedures to determine part mix ratios for independent demands in flexible manufacturing systems. IEEE Trans. Eng. Manage. 39, 359–369 (1992)
Tanaka, K., Kurahasi, M., Hayasi, M., Inao, S., Hibino, H., Fukuda, Y.: A study of the despatching order system to support module structured production system for the demand synchronized production. J. Adv. Mech. Des. Syst. Manuf. 4(2), 504–515 (2010)
Yu, J.M., Doh, H.H., Kim, J.S., Kwon, J.Y., Lee, D.H., Nam, S.H.: Input sequencing and scheduling for a reconfigurable manufacturing system with a limited number of fixtures. Int. J. Adv. Manuf. Technol. 67, 157–169 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Mittal, K.K., Jain, P.K., Kumar, D. (2019). Optimal Configuration Selection in Reconfigurable Manufacturing System. In: Deep, K., Jain, M., Salhi, S. (eds) Decision Science in Action. Asset Analytics. Springer, Singapore. https://doi.org/10.1007/978-981-13-0860-4_14
Download citation
DOI: https://doi.org/10.1007/978-981-13-0860-4_14
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0859-8
Online ISBN: 978-981-13-0860-4
eBook Packages: Business and ManagementBusiness and Management (R0)