Advertisement

Matrices for Carbon Fiber Composites

  • Soo-Jin ParkEmail author
Chapter
  • 1.9k Downloads
Part of the Springer Series in Materials Science book series (SSMATERIALS, volume 210)

Abstract

Carbon fibers have become an important reinforcing material in advanced composites because of its extremely high strength, stiffness, heat resistance, and lightweight. Fiber-reinforced polymer composites have gained substantial interest owing to their very high strength-to-weight and stiffness-to-weight ratios and are widely used in aerospace, engineering, marine, and automobile industries. In this chapter, we will present the various matrices and their characterization for carbon fibers’ composites. It is described as classification into two types of thermosetting resins and thermoplastic resins.

Keywords

Cyanate ester Epoxy Phenolic Acrylonitrile butadiene styrene (ABS) Polycarbonate (PC) Polyetheretherketone (PEEK) Polyetherimide (PEI) Polyethylene (PE) Polypropylene (PP) 

References

  1. 1.
    H.P.S.A. Khalil, M.A. Tehrani, Y. Davoudpour, A.H. Bhat, M. Jawaid, A. Hassan, J. Reinf. Plast. Comp. 32, 330 (2013)CrossRefGoogle Scholar
  2. 2.
    Y.H. Lee, M.S. Kim, H. Kim, J. Lee, D.J. Kim, J. Adhes. Sci. Technol. 27, 508 (2013)CrossRefGoogle Scholar
  3. 3.
    A. Molazemhosseini, H. Tourani, M.R. Naimi-Jamal, A. Khavandi, Polym. Test. 32, 535 (2013)CrossRefGoogle Scholar
  4. 4.
    S. Tiwari, J. Bijwe, Surf. Interface Anal. 45, 1838 (2013)CrossRefGoogle Scholar
  5. 5.
    R. Hamzaoui, S. Guessasma, B. Mecheri, A.M. Eshtiaghi, A. Bennabi, Mater. Des. 56, 60 (2014)CrossRefGoogle Scholar
  6. 6.
    K. Bilge, S. Venkataraman, Y.Z. Menceloglu, M. Papila, Comp. Part A: Appl. Sci. Manuf. 58, 73 (2014)CrossRefGoogle Scholar
  7. 7.
    J. Han, Y. Liang, Appl. Mech. Mater. 446–447, 1405 (2014)Google Scholar
  8. 8.
    A.S. Yudin, D.I. Buyaev, O.V. Afonicheva, I.G. Goryacheva, A.P. Krasnov, J. Fric, Wear 34, 245 (2013)Google Scholar
  9. 9.
    G. Russo, M. Pauletta, A. Cortesia, Eng. Struct. 52, 422 (2013)CrossRefGoogle Scholar
  10. 10.
    F.L. Jin, S.J. Park, Polym. Degrad. Stabil. 97, 2148 (2012)CrossRefGoogle Scholar
  11. 11.
    A.A. Azeez, K.Y. Rhee, S.J. Park, D. Hui, Comp. Part B: Eng. 45, 308 (2013)CrossRefGoogle Scholar
  12. 12.
    W. Dong, H.C. Liu, S.J. Park, F.L. Jin, J. Ind. Eng. Chem., Article in press (2013)Google Scholar
  13. 13.
    J.M. Barton, I. Hamerton, J.R. Jones, J.C. Stedman, Polymer 37, 4519 (1996)CrossRefGoogle Scholar
  14. 14.
    C. Marieta, E. Schulz, I. Mondragon, Compos. Sci. Technol. 62, 299 (2002)CrossRefGoogle Scholar
  15. 15.
    P. Ren, G. Liang, Z. Zhang, Polym. Compos. 27, 591 (2006)CrossRefGoogle Scholar
  16. 16.
    K. Chung, J.C. Seferis, Polym. Degrad. Stabil. 71, 425 (2001)CrossRefGoogle Scholar
  17. 17.
    P. Ren, G. Liang, Z. Zhang, Polym. Compos. 27, 402 (2006)CrossRefGoogle Scholar
  18. 18.
    X. Sheng, M. Akinc, M.R. Kessler, J. Therm. Anal. Calorim. 93, 77 (2008)CrossRefGoogle Scholar
  19. 19.
    M. Thunga, W.Y. Lio, M. Akinc, R. Kessler, Compos. Sci. Technol. 71, 239 (2011)CrossRefGoogle Scholar
  20. 20.
    E. Moaseri, M. Maghrebi, M. Baniadam, Mater. Des. 55, 644 (2014)CrossRefGoogle Scholar
  21. 21.
    E. Moaseri, M. Karimi, M. Maghrebi, M. Baniadam, Int. J. Solid Struct. 51, 774 (2014)CrossRefGoogle Scholar
  22. 22.
    M.A.A. Bakar, S. Ahmad, W. Kuntjoro, S. Kasolang, Appl. Mech. Mater. 393, 136 (2013)CrossRefGoogle Scholar
  23. 23.
    G. Liu, X.I. Hu, P. Zhang, R.L. Yu, J.W. Bao, M.H. Chen, Q.W. Li, X.S. Yi, Acta Polym. Sinica 10, 1334 (2013)Google Scholar
  24. 24.
    I.D.G. Ary Subagia, Y. Kim, J. Mech. Sci. Technol. 27, 987 (2013)CrossRefGoogle Scholar
  25. 25.
    X. Jia, G. Li, B. Liu, Y. Luo, G. Yang, X. Yang, Comp. Part A: Appl. Sci. Manuf. 48, 101 (2013)CrossRefGoogle Scholar
  26. 26.
    M. Li, Y. Gu, Y. Liu, Y. Li, Z. Zhang, Carbon 52, 109 (2013)CrossRefGoogle Scholar
  27. 27.
    F.L. Jin, C.J. Ma, S.J. Park, Mater. Sci. Eng., A 528, 8517 (2011)CrossRefGoogle Scholar
  28. 28.
    L. Zhu, F.L. Jin, S.J. Park, Bull. Korean Chem. Soc. 33, 2513 (2012)CrossRefGoogle Scholar
  29. 29.
    K. Satoh, K. Ohyama, N. Aoki, M. Iida, F. Nagai, Food Chem. Toxicol. 42, 983 (2004)CrossRefGoogle Scholar
  30. 30.
    A.I. Balabanovich, A. Hornung, D. Merz, H. Seifert, Polym. Degrad. Stabil. 85, 713 (2004)CrossRefGoogle Scholar
  31. 31.
    S.J. Park, M.H. Kim, J.R. Lee, S. Choi, J. Colloid Interf. Sci. 228, 287 (2000)CrossRefGoogle Scholar
  32. 32.
    M.J. Yoo, S.H. Kim, S.D. Park, W.S. Lee, J.W. Sun, J.H. Choi, S. Nahm, Eur. Polym. J. 46, 1158 (2010)CrossRefGoogle Scholar
  33. 33.
    S.J. Park, T.J. Kim, J.R. Lee, J. Polym. Sci., Part B: Polym. Phys. 38, 2114 (2000)CrossRefGoogle Scholar
  34. 34.
    G.H. Kwak, S.J. Park, J.R. Lee, J. Appl. Polym. Sci. 78, 290 (2000)CrossRefGoogle Scholar
  35. 35.
    S.J. Park, F.L. Jin, J.R. Lee, Mater. Sci. Eng., A 374, 109 (2004)CrossRefGoogle Scholar
  36. 36.
    M.C. Lee, T.H. Ho, C.S. Wang, J. Appl. Polym. Sci. 62, 217 (1996)CrossRefGoogle Scholar
  37. 37.
    W. Chen, Y. Yu, P. Li, C. Wang, T. Zhou, X. Yang, Compos. Sci. Technol. 67, 2261 (2007)CrossRefGoogle Scholar
  38. 38.
    S. Miloshev, P. Novakov, V. Dimitrov, I. Gitsov, Polymer 32, 3067 (1991)CrossRefGoogle Scholar
  39. 39.
    S.J. Park, M.K. Seo, J.R. Lee, J. Polym. Sci., Part A: Polym. Chem. 38, 2945 (2000)CrossRefGoogle Scholar
  40. 40.
    B. Guo, D. Jia, W. Fu, Q. Qiu, Polym. Degrad. Stabil. 79, 521 (2003)CrossRefGoogle Scholar
  41. 41.
    F. Mustata, D. Rosu, C.N. Cascaval, Polym. Test. 19, 927 (2000)CrossRefGoogle Scholar
  42. 42.
    S. Montserrat, J. Málek, P. Colomer, Thermochim. Acta 336, 65 (1999)CrossRefGoogle Scholar
  43. 43.
    H.J. Xu, F.L. Jin, S.J. Park, Bull. Korean Chem. Soc. 30, 2643 (2009)CrossRefGoogle Scholar
  44. 44.
    S.J. Park, F.L. Jin, Polym. Degrad. Stabil. 86, 515 (2004)CrossRefGoogle Scholar
  45. 45.
    S.J. Park, F.L. Jin, J.R. Lee, Macromol. Rapid Comm. 25, 724 (2004)CrossRefGoogle Scholar
  46. 46.
    S.J. Park, F.L. Jin, J.R. Lee, J.S. Shin, Eur. Polym. J. 41, 231 (2005)CrossRefGoogle Scholar
  47. 47.
    S.J. Park, F.L. Jin, J.S. Shin, Mater. Sci. Eng., A 390, 240 (2005)CrossRefGoogle Scholar
  48. 48.
    S.J. Park, F.L. Jin, Polym. Int. 54, 705 (2005)CrossRefGoogle Scholar
  49. 49.
    F.L. Jin, S.J. Park, Bull. Korean Chem. Soc. 30, 334 (2009)CrossRefGoogle Scholar
  50. 50.
    J. Rocks, L. Rintoul, F. Vohwinkel, G. George, Polymer 45, 6799 (2004)CrossRefGoogle Scholar
  51. 51.
    F.L. Jin, S.J. Park, J. Ind. Eng. Chem. 13, 808 (2007)Google Scholar
  52. 52.
    F.L. Jin, S.J. Park, Polym. Int. 57, 577 (2008)CrossRefGoogle Scholar
  53. 53.
    F.L. Jin, S.J. Park, Mater. Sci. Eng., A 478, 402 (2008)CrossRefGoogle Scholar
  54. 54.
    F.L. Jin, S.J. Park, J. Ind. Eng. Chem. 14, 564 (2008)CrossRefGoogle Scholar
  55. 55.
    M.H. Choi, B.H. Jeon, I.J. Chung, Polymer 41, 3243 (2000)CrossRefGoogle Scholar
  56. 56.
    S.J. Park, Y.S. Jang, J. Colloid Interf. Sci. 237, 91 (2001)CrossRefGoogle Scholar
  57. 57.
    H. An, B. Feng, S. Su, Carbon 47, 2396 (2009)CrossRefGoogle Scholar
  58. 58.
    J. Fei, H.J. Li, Y.W. Fu, L.H. Qi, Y.L. Zhang, Wear 269, 534 (2010)CrossRefGoogle Scholar
  59. 59.
    J.M. Park, D.J. Kwon, Z.J. Wang, G.Y. Gu, K.L. Devries, Comp. Part A: Appl. Sci. Manuf. 47, 156 (2014)CrossRefGoogle Scholar
  60. 60.
    Z.J. Wang, D.J. Kwon, G.Y. Gu, W.I. Lee, J.K. Park, K.L. DevVries, J.M. Park, Comp. Part A: Appl. Sci. Manuf. 52, 151 (2013)CrossRefGoogle Scholar
  61. 61.
    H. He, K. Li, J. Wang, J. Wang, J. Gu, R. Li, Polym. Compos. 32, 227 (2011)CrossRefGoogle Scholar
  62. 62.
    K.T. Hsiao, Compos. A 39, 834 (2008)CrossRefGoogle Scholar
  63. 63.
    V. Cecen, M. Sarikanat, Y. Seki, T. Govsa, H. Yildiz, I.H. Tavman, J. Appl. Polym. Sci. 102, 4554 (2006)CrossRefGoogle Scholar
  64. 64.
    M. Monti, M. Natali, R. Petrucci, J.M. Kenny, L. Torre, Polym. Compos. 32, 766 (2011)CrossRefGoogle Scholar
  65. 65.
    Z. Wu, L. Meng, L. Liu, Z. Jiang, L. Xing, D. Jiang, Y. Huang, J. Adhesion Sci. Technol. 28, 444 (2014)CrossRefGoogle Scholar
  66. 66.
    J. Vilčáková, P. Sáha, O. Quadrat, Eur. Polym. J. 38, 2343 (2002)CrossRefGoogle Scholar
  67. 67.
    X.R. Zhang, X.Q. Pei, Q.H. Wang, Mater. Design 30, 4414 (2009)CrossRefGoogle Scholar
  68. 68.
    P. Samyn, G. Schoukens, Mater. Chem. Phys. 115, 185 (2009)CrossRefGoogle Scholar
  69. 69.
    L. Mascia, Z. Zhang, S.J. Shaw, Compos. A 27A, 1211 (1996)CrossRefGoogle Scholar
  70. 70.
    T. Ogasawara, Y. Ishida, R. Yokota, T. Watanabe, T. Aoi, J. Goto, Compos. A 38, 1296 (2007)CrossRefGoogle Scholar
  71. 71.
    X. Zhang, X. Pei, Q. Wang, Mater. Chem. Phys. 115, 825 (2009)CrossRefGoogle Scholar
  72. 72.
    V.E. Yudin, M.Y. Goykhman, K. Balik, P. Glogar, G.N. Gubanova, V.V. Kudriavtsev, Carbon 38, 5 (2000)CrossRefGoogle Scholar
  73. 73.
    M.P. Stevens, Polymer Chemistry (Oxford University Press, New York, 1999)Google Scholar
  74. 74.
    J. Li, X.H. Cheng, Mater. Chem. Phys. 108, 67 (2008)CrossRefGoogle Scholar
  75. 75.
    N.S. Broyles, K.N.E. Verghese, S.V. Davis, H. Li, R.M. Davis, J.J. Lesko, J.S. Riffle, Polymer 39, 3417 (1998)CrossRefGoogle Scholar
  76. 76.
    F. Vautard, S. Ozcan, H. Meyer, Compos. A 43, 1120 (2012)CrossRefGoogle Scholar
  77. 77.
    F.L. Jin, K.Y. Rhee, S.J. Park, Mater. Sci. Eng., A 435–436, 429 (2006)CrossRefGoogle Scholar
  78. 78.
    K. Yamada, H. Yamane, K. Kumada, S. Tanabe, T. Kajiyama, J. Appl. Polym. Sci. 90, 2415 (2003)CrossRefGoogle Scholar
  79. 79.
    G. Yan, X. Wang, D. Wu, J. Appl. Polym. Sci. 129, 3502 (2013)CrossRefGoogle Scholar
  80. 80.
    Y. Chen, X. Wang, D. Wu, Polym. Adv. Techol. 24, 364 (2013)CrossRefGoogle Scholar
  81. 81.
    X. Yang, Z. Wang, M. Xu, R. Zhao, X. Liu, Mater. Des. 44, 74 (2013)CrossRefGoogle Scholar
  82. 82.
    C.Y. Huang, C.C. Wu, Eur. Polym. J. 36, 2729 (2000)CrossRefGoogle Scholar
  83. 83.
    J. Li, C.L. Cai, Curr. Appl. Phys. 11, 50 (2011)CrossRefGoogle Scholar
  84. 84.
    J. Li, Y.F. Zhang, Surf. Interface Anal. 41, 610 (2009)CrossRefGoogle Scholar
  85. 85.
    S.H. Wu, F.Y. Wang, C.C.M. Ma, W.C. Chang, C.T. Kuo, H.C. Kuan, W.J. Chen, Mater. Lett. 49, 327 (2001)CrossRefGoogle Scholar
  86. 86.
    E.C. Botelho, L. Figiel, M.C. Rezende, B. Lauke, Compos. Sci. Technol. 63, 1843 (2003)CrossRefGoogle Scholar
  87. 87.
    Y. Li, Z. Wan, G. Gao, X. Xiong, C. Wang, H. Wan, Luo. Mater. Des. 51, 257 (2013)CrossRefGoogle Scholar
  88. 88.
    N. Feng, X. Wang, D. Wu, Curr. Appl. Phys. 13, 2038 (2013)CrossRefGoogle Scholar
  89. 89.
    S. Motozuka, M. Tagaya, Y. Hotta, M. Morinaga, T. Ikoma, T. Honma, T. Daimon, J. Tanaka, Ind. Eng. Chem. Res. 52, 2182 (2013)CrossRefGoogle Scholar
  90. 90.
    A.Y. Feldman, M.F. Gonzalez, E. Wachtel, M.P. Moret, G. Marom, Polymer, 7239 (2004)CrossRefGoogle Scholar
  91. 91.
    S. Senthilvelan, R. Gnanamoorthy, Polym. Test. 25, 56 (2006)CrossRefGoogle Scholar
  92. 92.
    M.A. Montes-Morán, A. Martı́nez-Alonso, J.M.D. Tascón, M.C. Paiva, C.A. Bernardo, Carbon 39, 1057 (2001)CrossRefGoogle Scholar
  93. 93.
    J.A. Carneiro, C.A. Covas, G. Bernardo, F.W.J.V. Caldeira, J.M. Hattum, R.L. Ting, M.L. Alig, Lake. Compos. Sci. Technol. 58, 401 (1998)CrossRefGoogle Scholar
  94. 94.
    J.M. Park, J. Colloid Interf. Sci. 225, 384 (2000)CrossRefGoogle Scholar
  95. 95.
    Y.K. Choi, K. Sugimoto, S.M. Song, M. Endo, Compos. A 37, 1944 (2006)CrossRefGoogle Scholar
  96. 96.
    S.M. Kurtz, in Chapter 2 - Synthesis and Processing of PEEK for Surgical Implants, PEEK Biomaterials Handbook (2012), pp. 9–22CrossRefGoogle Scholar
  97. 97.
    C.C.M. Ma, N.H. Tai, S.H. Wu, S.H. Lin, J.F. Wu, J.M. Lin, Compos. B 28B, 407 (1997)CrossRefGoogle Scholar
  98. 98.
    G.Y. Xie, G.X. Sui, R. Yang, Compos. Sci. Technol. 71, 828 (2011)CrossRefGoogle Scholar
  99. 99.
    A. Gebhard, T. Bayerl, A.K. Schlarb, K. Friedrich, Corros. Sci. 51, 2524 (2009)CrossRefGoogle Scholar
  100. 100.
    A. Gebhard, T. Bayerl, A.K. Schlarb, K. Friedrich, Wear 268, 871 (2010)CrossRefGoogle Scholar
  101. 101.
    G.M. Wu, J.M. Schultz, Polym. Compos. 21, 223 (2000)CrossRefGoogle Scholar
  102. 102.
    M. Hou, L. Ye, H.J. Lee, Y.W. Mai, Compos. Sci. Technol. 58, 181 (1998)CrossRefGoogle Scholar
  103. 103.
    K.Y. Kim, L. Ye, Compos. A 35, 477 (2004)CrossRefGoogle Scholar
  104. 104.
    R. Akkerman, P.E. Reed, K.Y. Huang, L. Warnet, Eur. Struct. Integr. Soc. 27, 3 (2000)CrossRefGoogle Scholar
  105. 105.
    G. Xian, Z. Zhang, Wear 258, 776 (2005)CrossRefGoogle Scholar
  106. 106.
    A. Fernández, E. Arbelaiz, I. Diaz, Polym. Compos. 25, 480 (2004)CrossRefGoogle Scholar
  107. 107.
    G.M. Wu, J.M. Schultz, Polym. Compos. 21, 223 (2000)CrossRefGoogle Scholar
  108. 108.
    A.A.J.M. Peijs, J.M.M.D. Kok, Composites 24, 19 (1993)CrossRefGoogle Scholar
  109. 109.
    I. Turku, T. Kärki, Eur. J. Wood Wood Prod., Article in press (2013)Google Scholar
  110. 110.
    A. May-Pat, A. Valadez-González, P.J. Herrera-Franco, Polym. Test. 32, 1114 (2013)CrossRefGoogle Scholar
  111. 111.
    D. Hertel, R. Valette, H. Münstedt, J. Non-Newton, Fluid Mech. 153, 82 (2008)Google Scholar
  112. 112.
    M.W. Spencer, L. Cui, Y. Yoo, D.R. Paul, Polymer 51, 1056 (2010)CrossRefGoogle Scholar
  113. 113.
    N. Chand, S. Kreuzberger, G. Hinrichsen, Composites 25, 878 (1994)CrossRefGoogle Scholar
  114. 114.
    Q. Ling, J. Sun, Q. Zhao, Q. Zhou, Mater. Sci. Eng., B 162, 162 (2009)CrossRefGoogle Scholar
  115. 115.
    N. Cohen, T. Rae, Biomaterials 5, 352 (1984)CrossRefGoogle Scholar
  116. 116.
    X.S. Zhang, H. Yi, S. Yui, M. Asai, Sumita, Mater. Letter 36, 186 (1998)CrossRefGoogle Scholar
  117. 117.
    Z. Jiang, L.A. Gyurova, A.K. Schlarb, K. Friedrich, Z. Zhang, Compos. Sci. Technol. 68, 734 (2008)CrossRefGoogle Scholar
  118. 118.
    H. Xu, Z. Feng, J. Chen, H. Zhou, Mater. Sci. Eng., A 416, 66 (2006)CrossRefGoogle Scholar
  119. 119.
    N.G. Karsli, A. Aytac, M. Akbulut, V. Deniz, O. Güven, Radiat. Phys. Chem. In PressGoogle Scholar
  120. 120.
    R.C.L. Dutra, B.G. Soares, E.A. Campos, J.L.G. Silva, Polymer 41, 3841 (2000)CrossRefGoogle Scholar
  121. 121.
    N.G. Karsli, A. Aytac, Mater. Design 32, 4069 (2011)CrossRefGoogle Scholar
  122. 122.
    J. Taketa, L. Ustarroz, S.V. Gorbatikh, I. Lomov, Verpoest, Composites: Part A 41, 927 (2010)CrossRefGoogle Scholar
  123. 123.
    R. Rezaei, N.A. Yunus, Ibrahim, Mater. Design 30, 260 (2009)CrossRefGoogle Scholar
  124. 124.
    S.Y. Fu, B. Lauke, E. Mäder, X. Hu, C.Y. Yue, J. Mater. Process. Tech. 89–90, 501 (1999)CrossRefGoogle Scholar
  125. 125.
    J. Li, Appl. Surf. Sci. 255, 8682 (2009)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Department of ChemistryInha UniversityIncheonKorea (Republic of)

Personalised recommendations