Abstract
Spalling is a phenomenon that occurs on gear tooth flanks by contact fatigue loading. Contact loading results to shear stress in tooth below the surface. In repeating contact loading, shear stress also repeats. Repeated shear stress causes subsurface crack initiation. Some parameters such as maximum contact pressure and friction coefficient can effect on the position of maximum shear stress and spalling depth as a result. In this study, the stress field of some case study is determined by simulation. The positions of maximum shear stress are compared with the experimental spalling depth of literature. Results are in good agreement and it validates the simulation method used in the present work. Some different conditions for maximum contact stress and friction coefficient are simulated. Results show that depth of spalling increases with increasing the maximum contact pressure. In addition spalling depth decreases with increasing the friction coefficient. This result agrees with literature that state in high friction coefficient pitting occurs instead of spalling.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Boresi, A.P., Schmidt, R.J., Sidebottom, O.M.: Advanced Mechanics of Materials, 5th edn. Wiley, Hoboken (1993)
Ding, Y., Gear, J.A.: Spalling depth prediction model. Wear 267, 1181–1190 (2009)
Glodez, S., Winter, H., Stuwe, H.P.: A fracture mechanics model for the wear of gear flanks by pitting. Wear 208, 177–183 (1997)
Glodez, S., Ren, Z.: Modelling of crack growth under cyclic contact loading. Theoret. Appl. Fract. Mech. 30, 159–173 (1998)
Glodez, S., Abersek, B., Flasker, J., Ren, Z.: Evaluation of the service life of gears in regard to surface pitting. Eng. Fract. Mech. 71, 429–438 (2004)
Glodez, S., Ren, Z., Flasker, J.: Simulation of surface pitting due to contact loading. Int. J. Numer. Meth. Eng. 43, 33–50 (1998)
Fajdiga, G., Glodez, S., Kramar, J.: Pitting formation due to surface and subsurface initiated fatigue crack growth in contacting mechanical elements. Wear 262, 1217–1224 (2007)
Aslantas, K., Tasgetiren, S.: A study of spur gear pitting formation and life prediction. Wear 257, 1167–1175 (2004)
Ding, Y., Rieger, N.: Spalling formation mechanism for gears. Wear 254, 1307–1317 (2003)
Heirani, H., Farhangdoost, K.: Predicting depth and path of subsurface crack propagation at gear tooth flank under cyclic contact loading. J. Solid Mech. 9(3), 587–598 (2017)
Flasker, J., Fajdiga, G., Glodez, S., Hellen, T.K.: Numerical simulation of surface pitting due to contact loading. Int. J. Fatigue 23, 599–605 (2001)
Jurenka, J., Spaniel, M.: Advanced FE model for simulation of pitting crack growth. Adv. Eng. Softw. 72, 218–225 (2014)
Fajdiga, G., Sraml, M.: Fatigue crack initiation and propagation under cyclic contact loading. Eng. Fract. Mech. 76, 1320–1335 (2009)
Abaqus/CAE User’s Manual, version 6.12 (2012)
Sraml, M., Flasker, J., Potrc, I.: Numerical procedure for predicting the rolling contact fatigue crack initiation. Int. J. Fatigue 25, 585–595 (2003)
Budynas, R.G., Nisbett, J.K.: Shigley’s Mechanical Engineering Design, 9th edn. McGraw-Hill, New York (2011)
Qin, X., Sun, D., Xie, L.: Analysis of critical stress for subsurface rolling contact fatigue damage assessment under roll/slide contact. J. Fail. Anal. Prev. 14, 61–67 (2014)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Heirani, H., Farhangdoost, K. (2019). Effect of Friction Coefficient and Maximum Contact Pressure on the Spalling Depth of Gear Teeth Flank. In: Abdel Wahab, M. (eds) Proceedings of the 7th International Conference on Fracture Fatigue and Wear. FFW 2018. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-0411-8_6
Download citation
DOI: https://doi.org/10.1007/978-981-13-0411-8_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0410-1
Online ISBN: 978-981-13-0411-8
eBook Packages: EngineeringEngineering (R0)