Advertisement

Analysis on the Major Environmental Factors Affecting the Weather Resistance of Polyester Coating

  • Xin Xu
  • Quan Jiang
  • Yannan Shi
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Three types of polyester coatings were selected and subjected to 2-year natural exposure in Qionghai, Shenyang and Turpan. After natural weathering, the signs of discoloration and losing light were found on all the three polyester coatings. The polyester coatings under atmospheric environment with higher corrosion concentration were more impacted at the initial stage by such factors as pollutant, rain-wash and temperature, i.e. with large color aberration and aging rate, while at the late stage, the color aberration and aging rate either dropped or slowed down. Similar to the environmental factors affecting color aberration, the variation in glossiness indicated that high temperature or high irradiance simply did not keep glossiness degrading greatly in long term; instead, the combined environmental factors such as high temperature and humidity, high irradiance and high salt were mutually promoted and synthetically acted to accelerate the aging of coating. By comparing among the test results from the three sites, Qionghai has stronger ultraviolet radiation, higher salt concentration in the atmosphere, and higher temperature and humidity throughout the year. Therefore the weather in Qionghai is harsh enough to produce good accelerating effect, which enables rapid establishment of the methodology system for evaluating the environment adaptability of polyester coating.

Keywords

Polyester coating Natural exposure Weather resistance Environmental impact factor 

References

  1. 1.
    L.V. Guiying, Z. Hua, L. An et al., On the aging and anti-aging evaluation system for polymer materials. Chem. Bio. Eng. 23, 1–4 (2003)Google Scholar
  2. 2.
    M. Omastova, S. Podhradska, J. Prokes et al., Thermal ageing of conducting polymeric composites. Polym. Degrad. Stab., 82, 251–256 (2003)CrossRefGoogle Scholar
  3. 3.
    L. Xiaogang, G. Jin, Z. Sanping et al., Aging Rules and Mechanism of Polymer Material in Natural Environment (Science Press, Beijing, 2011)Google Scholar
  4. 4.
    P.K. Sharma, M. Khandelwal, T.N. Singh, Variation on physico-mechanical properties of kota stone under different watery environments. Build. Environ. 42(12), 4117–4123 (2007)CrossRefGoogle Scholar
  5. 5.
    C. Arroyave, F.A. Lopez, M. Morcillo, The early atmospheric corrosion stages of carbon steel in acidic fogs. Corros. Sci. 37(11), 1751–1761 (1995)CrossRefGoogle Scholar
  6. 6.
    M. Yamashita, H. Miyuki, Y. Matsuda et al., The long term growth of the protective rust layer formed on weathering steel by atmospheric corrosion during a quarter of a century. Corros. Sci. 36(2), 283–299 (1994)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.National Building Material Testing CenterBeijingChina

Personalised recommendations