Abstract
The microstructure and mechanical properties of 410 martensite stainless steel wire during the cold drawing process have been investigated by means of universal testing machine, optical microscope (OM) and transmission electron microscope (TEM) techniques. The results showed that the microstructure of 410 stainless steel was consisted of martensite and ferrite. During the cold drawing, when the wire was drawn from a diameter of 7.5 mm to a diameter of 5.0 mm, the average grain size decreased from 22.7 to 13.8 μm, the tensile strength increased from 504 to 741 MPa, elongation decreased from 38.2 to 13.1%. The strain hardening of the steel wire could be divided into two stages. In the first stage, the n value increased gradually and peaked at 0.85 which was associated with the plastic deformation of ferrite. In the second stage, the n value decreased to 0.25 which was associated with plastic deformation of martensite and the declined compatibility of the duplex phase. Moreover, the workhardening mechanism was discussed. The main work-hardening mechanism of 410 steel wire during the cold drawing process is fine grain strengthening and dislocation strengthening. When the steel wire was drawn from a diameter of 7.5 mm to a diameter of 5.0 mm, the strengthening benefit increased by 46.8 MPa and the dislocation strengthening increased by 173 MPa.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
J. Yao, J. Liu, Y. Jia et al., Forming mechanism and control for longitudinal cracks on continuous casting billet of 1Cr13 semi-martensite stainless steel. Hebei Metall. 04, 18–22 (2014)
B. Xintao, Development trend of stainless steel. Heat Treat. (04), 5–9 (2007)
X. Jimei, The metal problem of stainless steel. Metallurgical Industry Press (2006), pp. 155–286
S. Vafaeian, A. Fattah-Alhosseini, Y. Mazaheri et al., On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel. Mater. Sci. Eng., A 669, 480–489 (2016)
X. Kangping, Z. Meng, Study on microstructure and mechanical properties of ultrafine stainless steel microfilament during drawing. J. Nanchang Univ. (02), 173–177 (2008)
L. Jiang, K. Feng, Z. Guo et al., Research on performance contrast between 321 stainless steel and 410 stainless steel. Hot Working Technol. 41(6), 124–126 (2012)
S.A. JenabaliJahromi, A. Khajeh, B. Mahmoudi, Effect of different pre-heat treatment processes on the hardness of AISI 410 martensitic stainless steels surface-treated using pulsed neodymium-doped yttrium aluminum garnet laser. Mater. Des. 34, 857–862 (2012)
Sokol. Duplex stainless steel. Atomic Energy Publishing House, Beijing (1979) p. 108
G. Liu, B. Wang, X. Shi et al., Research present situation of work-hardening and evolution of microstructure and mechanical properties of cold drawing pearlitic steel wires. Mater. Rev. S2, 204–207 (2008)
M.C. Tsai, C.S. Chou, J.S. Du et al., Phase transformation in AISI 410 stainless steel. Mater. Sci. Eng., A 332(1–2), 1–10 (2002)
L. Chen, R.B. Song, F.Q. Yang et al., Working hardening mechanism and aging treatment behaviors of D631 precipitation hardening stainless steel wire. Mater. Sci. Forum 788, 362–366 (2014)
H. Yu, Study on strain strengthening technology and properties of austenitic stainless steel. J. Mech. Eng. 2, 87–92 (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Yu, H., Song, R., Tan, Y., Wang, T., Li, L. (2018). Effect of Cold Drawing on Microstructure and Mechanical Properties of 410 Martensite Stainless Steel Wire. In: Han, Y. (eds) Advances in Materials Processing. CMC 2017. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-0107-0_46
Download citation
DOI: https://doi.org/10.1007/978-981-13-0107-0_46
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0106-3
Online ISBN: 978-981-13-0107-0
eBook Packages: EngineeringEngineering (R0)