Formation Mechanism of Oxide Scales Grown on X10CrAlSi18 and 310S Heat-Resistant Stainless Steels Under High Temperature in Air

  • Yuqing Zhou
  • Dening Zou
  • Wei Zhang
  • Yingbo Zhang
  • Lei Du
Conference paper

Abstract

To promote the application of resource-saving heat-resistant stainless steels, the study on high temperature oxidation behavior and oxide-scales formation mechanism of X10CrAlSi18 ferritic heat-resistant stainless steels (FHSSs) and 310S austenitic heat-resistant stainless steels (AHSSs) was carried out in air up to 140 h, and the microstructure of oxide scales, oxidation kinetics and thermodynamics theories, and the classical hypothesis of the third-element effect analyzed. The results showed that the cost-effective X10CrAlSi18 FHSSs presented good oxidation resistance at 800 and 900 °C due to the compact multicomponent oxide scales composed of Al2O3, Cr2O3, MnCr2O4 and MnFe2O4 and good adhesion to the matrix. However, the oxidation resistance of the alloy at 1000 °C was deteriorated, which is mainly due to the non-protective Fe2O3. The oxide scales of 310S AHSSs containing Cr2O3, MnCr2O4 and inner SiO2 exhibited good oxidation resistance, while the internal oxidation of silicon weakened the adhesion to the substrate.

Keywords

Heat-resistant stainless steel Austenite and ferrite Third-element effect Oxidation mechanism 

Notes

Acknowledgements

The authors acknowledge the support of this work by the Iron and Steel Joint Fund of National Natural Science Foundation of China (U1460104), National Natural Science Foundation of China (51774226), and Scientific Research Program of Shaanxi Education Department (17JF013).

References

  1. 1.
    N. Karimi, F. Riffard, F. Rabaste, S. Perrier, R. Cueff, C. Issartel, H. Buscail, Characterization of the oxides formed at 1000 °C on the AISI 304 stainless steel by X-ray diffraction and infrared spectroscopy, J. App. Surf. Sci. 254 (2008) 2292–2299.Google Scholar
  2. 2.
    H. Yan, H. Bi, X. Li, Z. Xu, Mater. Charact. 60 (2009) 65–68.Google Scholar
  3. 3.
    E.H. Saarivirta, V.T. Kuokkala, P. Pohjanne, Thermally grown oxide films and corrosion performance of ferritic stainless steels under simulated exhaust gas condensate conditions, Corros. Sci. 87 (2014) 344–365.Google Scholar
  4. 4.
    Y. Xu, X. Zhang, L. Fan, Improved oxidation resistance of 15 wt.% Cr ferritic stainless steels containing 0.08–2.45 wt.% Al at 1000 °C in air, Corros. Sci. 100 (2015) 311–321.Google Scholar
  5. 5.
    L. Xin, S. Jun, B.H. yun, High-temperature oxidation behavior of ferritic stainless steel containing molybdenum, J. Iron and Steel Res. 5 (2013) 54–58.Google Scholar
  6. 6.
    L.P. Qing, Z. Peng, L. Hui, M. Qian, W. Y. Peng, Effect of solution treatment on microstructure and properties of high-alumina 310S steel, T. Mater. Heat Treat. 35 (2014) 73–78.Google Scholar
  7. 7.
    H. Fujikawa, S.B. Newcomb, High temperature oxidation behavior of high Al content ferritic and austenitic stainless steels with and without rare-earth element addition, Oxid. Met. 77 (2012) 85–92.Google Scholar
  8. 8.
    T. Liu, C. Wang, H. Shen, W. Chou, N.Y. Iwata, A. Kimura, The effects of Cr and Al concentrations on the oxidation behavior of oxide dispersion strengthened ferritic alloys, Corros. Sci. 76 (2013) 310–316.Google Scholar
  9. 9.
    T.J. Park, J.P. Kong, S.H. Uhm, I.S. Woo, J.S. Lee, C.Y. Kan, Effect of Al–Si coating layer on the penetration and microstructures of ferritic stainless steel, 409L GTA welds, J. Mater. Proc. Tech. 211 (2011) 415–423.Google Scholar
  10. 10.
    D.J. Young, High temperature oxidation and corrosion of metals, Elsevier, London, 2008.Google Scholar
  11. 11.
    C. Wagner, Theoretical analysis of the diffusion processes determining the oxidation rate of alloys, J. Electro. chem. Soc. 99 (1952) 369–80.Google Scholar
  12. 12.
    J.G. Goedjen, D.A. Shores, The effect of alloy grain size on the transient oxidation behavior of an alumina-forming alloy, Oxid. Metals. 37 (1992) 125–42.Google Scholar
  13. 13.
    R. Haugsrud, On the high-temperature oxidation of nickel, Corros.Sci. 45 (2003) 211–35.Google Scholar
  14. 14.
    L.M. shuan, High-temperature corrosion of materials, Press Metall. Industry, Beijing, 2002.Google Scholar
  15. 15.
    F.H. Stott, G. C. Wood, J. Stringert, The influence of alloying elements on the development and maintenance of protective scales, Oxid. Metals. 44 (1995) 113–45.Google Scholar
  16. 16.
    C. Wagner, Corros. Sci., 5, 751 (1965).Google Scholar
  17. 17.
    M.G. Hobby, M.Sc. Thesis, Univ. of Manchester (1968).Google Scholar
  18. 18.
    W.C. Hagel, Corrosion, 21, 316 (1965).Google Scholar
  19. 19.
    L.F. He, P. Roman, B. Leng, K. Sridharan, M. Anderson, T.R. Allen, Corrosion behavior of an alumina forming austenitic steel exposed to supercritical carbon dioxide, Corros. Sci. 82 (2014) 67–76.Google Scholar
  20. 20.
    G. Fu, L. Wei, Influence of a Cr2O3 glass coating on enhancing the oxidation resistance of 20MnSiNb structural steel, Sur. and Coatings Tech. 294 (2016) 8–14.Google Scholar
  21. 21.
    D.S. Li, Q.X. Dai, et al, High-temperature oxidation resistance of austenitic stainless steel Cr18Ni11Cu3Al3MnNb, J. Iron and Steel Res. Int. 19 (2012) 74–78.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Yuqing Zhou
    • 1
  • Dening Zou
    • 1
  • Wei Zhang
    • 2
  • Yingbo Zhang
    • 1
  • Lei Du
    • 1
  1. 1.School of Metallurgy and EngineeringXi’an University of Architecture and TechnologyXi’anChina
  2. 2.State Key Laboratory for Mechanical Behavior of MaterialsXi’an Jiaotong UniversityXi’anChina

Personalised recommendations