Abstract
Nowadays there is increasing number of small scale power generations which are connected to distribution networks termed as Distributed Generation (DG). The allocation of DG in distribution networks is intended for power flow control, improvement in stability and voltage profile, power factor correction, and reduction of line losses. This paper presents an optimization approach using Genetic Algorithm (GA) to find optimal location and size of DG in radial distribution system. The objective is to minimize the active power loss keeping the voltage profile in distribution system within defined limits. The effectuality of proposed approach is checked on IEEE 33 bus and 69 bus test systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
R. E. Brown, Electric Power Distribution Reliability, CRC Press, 2008.
S. H. Horowitz, A. G. Phadke, Power System Relaying, 2nd ed. Baldock, Research Studies Press Ltd, 2003.
T. Ackermann, G. Andersson, and L. Sder, “Distributed generation: a definition,” Elect. Power Syst. Res., vol. 57, pp. 195–204, 2001.
T. Ackerman and V. Knyazkin, “Interaction between distributed generation and the distribution network: operation aspects,” IEEE PES Transm. and Distrib. Conference and Exhibition, vol. 2, pp. 1357–1362, 2002.
S. Kansal, B. B. R. Sai, B.Tyagi, V. Kumar, “Optimal placement of distributed generation in distribution networks,” Int J Engineering, Science and Technology, vol. 3(3), pp. 47–55, 2011.
Mohd Zamri Che Wanik, Istvan Erlich, and Azah Mohamed, “Intelligent management of distributed generators reactive power for loss minimization and voltage control,” MELECON 2010-15th IEEE Mediterranean Electro-technical Conference, pp. 685–690, 2010.
P. S. Georgilakis and N. D. Hatziargyriou, “Optimal distributed generation placement in power distribution networks: models, methods, and future research,” IEEE Trans. Power Syst., 28 (3), pp. 3420–3428, 2013.
Y. A. Katsigiannis and P. S. Georgilakis, “Effect of customer worth of interrupted supply on the optimal design of small isolated power systems with increased renewable energy penetration,” IET Gener. Transm. Distrib., 7 (3), pp. 265–275, 2013.
J. A. Peças Lopes, N. Hatziargyriou, J. Mutale, P. Djapic, and N. Jenkins, “Integrating distributed generation into electric power systems: a review of drivers, challenges and opportunities,” Elect. Power Syst. Res., 77 (9), pp. 1189–1203, 2007.
R. Jabr, and B. Pal, “Ordinal optimization approach for locating and sizing distributed generation,” IET Gener. Transm. Distrib., 3 (8), pp. 713–723, 2009.
A. Gopi, and P. A. Raj, “Distributed generation for line loss reduction in radial distribution system,” International Conference on Emerging Trends in Electrical Engineering and Energy Management (ICETEEEM-2012), pp. 29–32, 2012.
N. C. Sahoo, S. Ganguly and D. Das, “Recent advances on power distribution system planning: a state-of-the-art survey,” Energy Systems, 4, pp. 165–193, 2013.
A. Pecas Lopes, N. Hatziargyriou, J. Mutale, P. Djapic and N. Jenkins, “Integrating distributed generation into electric power systems: a review of drivers, challenges and opportunities,” Elect. Power Syst. Res., vol. 77, pp. 1189–1203, 2007.
A. Keane, “State-of-the-Art techniques and challenges ahead for distributed generation planning and optimization,” IEEE Trans. Power Syst., vol. 28 (2), pp. 1493–1502, 2013.
A. Alarcon-Rodriguez, G. Ault and S. Galloway, “Multi-objective planning of distributed energy resources: A review of the state-of-the-art,” Renewable and Sustainable Energy Reviews, vol. 14, pp. 1353–1366, 2010.
S. Kansal, V. Kumar, B. Tyagi, “Optimal placement of different type of DG sources in distribution networks,” Int J Electr Power and Energy Syst, vol. 53, pp. 752–760, 2013.
K. Vinoth kumar and M.P. Selvan, “Planning and operation of distributed generations in distribution systems for improved voltage profile,” IEEE PES Power Systems Conference and Exposition (PSCE 2009), March 2009, Washington, USA.
J.B.V. Subrahmanyam and C. Radhakrishna “Distributed generator placement and sizing in unbalanced radial distribution system,” International Journal of Electrical and Electronics Engineering, vol. 3, pp. 746–753. 2009.
D. Q. Hung, N. Mithulananthan and R.C. Bansal, “Analytical expressions for DG allocation in primary distribution networks,” IEEE Trans. Energy Conversion, vol. 25 (3), pp. 814–820, 2010.
C.L.T. Borges and D.M. Falcao, “Optimal distributed generation allocation for reliability, losses and voltage improvement,” International Journal of Power and Energy Systems, vol. 28 (6), pp. 413–420, July 2006.
G. Celli, E. Ghiani, S. Mocci and F. Pilo, “A multi-objective evolutionary algorithm for the sizing and siting of distributed generation,” IEEE Trans. Power Syst., vol. 20 (2), pp. 750–757, 2005.
G. Carpinelli, G. Celli, S. Mocci, F. Pilo and A. Russo, “Optimization of embedded generation sizing and siting by using a double trade-off method,” IEE Proc. Gener. Transm. Distrib., vol. 152 (4), pp. 503–513, 2005.
D. Singh, and K. S. Verma, “Multi-objective optimization for DG planning with load models,” IEEE Trans. Power Syst., vol. 24 (1), pp. 427–436, 2009.
D. Das, “Reactive power compensation for radial distribution networks using genetic algorithm,” International Journal of Electrical Power & Energy Systems, vol. 24, issue 7, pp. 573–581, October 2002.
Nien-Che Yang and Tsai-Hsiang Chen, “Dual genetic algorithm based approach to fast screening process for distributed generation interconnections,” IEEE Trans. Power Delivery, vol. 26(2), pp. 850–858, April 2011.
A. M. El-Zonkoly, “Optimal placement of multi-distributed generation units including different load models using particle swarm optimisation,” IET Gener. Trans. Distrib., vol. 5 (7), pp. 760–771, 2011.
A. H. Mantway and M. M. Al-Muhaini, “Multi-objective BPSO algorithm for distribution system expansion planning including distributed generation,” IEEE/PES Transmission and Distribution Conference and Exposition, pp. 1–8, 2008.
N. C. Sahoo, S. Ganguly and D. Das, “Simple heuristics-based selection of guides for multi objective PSO with an application to electrical distribution system planning”, Eng. Appl. Artif. Intell., 24, pp. 567–585, 2011.
S. Ganguly, N.C. Sahoo and D. Das, “A novel multi-objective PSO for electrical distribution system planning incorporating distributed generation,” J. Energy Syst., 1, pp. 291–337, 2010.
B.A. De-Souza and J.M.C. De-Albuquerque, “Optimal placement of distributed generators networks using evolutionary programming,” Proc. of IEEE/PES Transmission & Distribution Conference and Exposition: Latin America: 6, 2006.
Jen-Hao Teng, “A direct approach for distribution system load flow solutions,” IEEE Trans. Power Delivery, vol. 18(3), pp. 882–887, July 2003.
S. Kansal, V. Kumar, B. Tyagi, “Hybrid approach for optimal placement of multiple DGs of multiple types in distribution networks” Int J Electr Power and Energy Syst, vol. 75, pp. 225–236, 2015.
Acknowledgments
We gratefully acknowledge our deep indebtedness to IKG Punjab Technical University, Jalandhar, Punjab, India, which helped us during the whole period of the work.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kashyap, M., Mittal, A., Kansal, S. (2019). Optimal Placement of Distributed Generation Using Genetic Algorithm Approach. In: Nath, V., Mandal, J. (eds) Proceeding of the Second International Conference on Microelectronics, Computing & Communication Systems (MCCS 2017). Lecture Notes in Electrical Engineering, vol 476. Springer, Singapore. https://doi.org/10.1007/978-981-10-8234-4_47
Download citation
DOI: https://doi.org/10.1007/978-981-10-8234-4_47
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8233-7
Online ISBN: 978-981-10-8234-4
eBook Packages: EngineeringEngineering (R0)