Abstract
A square-cantilevered smart plate instrumented with piezoelectric sensor is considered in this work. Finite element model of the plate is done using Hamilton’s principle. Only first three modes are obtained using modal truncation. Time response of sensor voltage is observed at different element locations. Piezoelectric sensor voltage in open loop is compared for different element locations. Simulations are performed using MATLAB software.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
S. Sharma, R. Vig, and N. Kumar, “Effect of electric field and temperature on dielectric constant and piezoelectric coeffcient of piezoelectric material: A review,” Integrated Ferroelectrics, Vol. 167, pp. 154–175, 2015.
V. Gupta, M. Sharma, N. Thakur, “Optimization criteria for optimal placement of piezoelectric sensors and actuators on a smart structure: A Technical Review,” Journal of Intelligent Materials Systems and Structures, Vol. 21, pp. 1227–1242, 2010.
M. Sharma, S. P. Singh and B. L. Sachdeva, “Modal control of a plate using fuzzy logic controller,” Smart Materials and Structures, Vol. 16, pp. 1331–1341, 2007.
S. Sharma, R. Vig, and N. Kumar, “Active vibration control: considering effect of electric field on piezoelectric patches,” Smart Structures and Systems., Vol. 16, No. 6, pp. 1091–1105, 2015.
S. Sharma, R. Vig, and N. Kumar, “Finite element modelling of smart piezo structure: considering dependence of piezoelectric coefficients on electric field,” Mechanics Based Design of Structures and Machines, 2015. https://doi.org/10.1080/15397734.2015.1076728.
J. E. Mottershed and Y. M. Ram, “Inverse Eigen value problems in vibration absorption: passive modification and control,” Mechanical Systems and Signals Processing, Vol. 20, pp. 5–44, 2006.
S. Sharma, R. Vig, and N. Kumar, “Temperature compensation in smart structure by application of DC bias on piezoelectric patches,” Journal of intelligent materials systems and structures, Vol. 27, pp. 2024–2035, 2016.
B. M. Dutta and V. Sokolov, “A solution of the affine quadratic inverse Eigen value problem,” Linear Algebra and its Applications, Vol. 434, pp. 1745–1760, 2011.
V. Gupta, M. Sharma, N. Thakur, “Active vibration control of a smart plate using a piezoelectric sensor-actuator pair at elevated temperatures,” Smart Materials Structures, Vol. 20, pp. 105023-1–105023-13, 2011.
M. A. Ahmad, M. S. Ramli, A. N. K. Nasir, R. Ismail and M. S. Saealal “Performance assessment of active vibration control using nominal characteristics trajectory following NCTF controller,” 4th Asia International Conf. Mathematical/Analytical Modelling and Computer Simulation (AMS), pp. 414–419, 2010.
U. H. Diala and G. N. Ezeh, “Nonlinear damping for vibration isolation and control using semi active methods,” Academic Research International, Vol. 3, No. 3, pp. 141–152, 2012.
S. M. Hasheminejad and M. Vahedi, “Active vibration control of a thick piezolaminated beam with imperfectly integrated sensor and actuator layers,” International Journal of Automation and Control, Vol 8, No. 1, pp. 58–87, 2014.
K. Knipe, “Structural analysis and active vibration control of tetraform space frame for use in microscale machining,” Doctoral dissertation, University of Central Florida Orlando, Florida, 2007.
H. S. Bouomy “Active vibration control of a dynamical system via negative linear velocity feedback,” Nonlinear Dynamics, Vol. 77, pp. 413–423, 2014.
Y. K. Kang, H. C. Park, J. Kim, and S. B. Choi, “Interaction of active and passive vibration control of laminated composite beams with piezoelectric sensors/actuators,” Materials and Design, Vol. 23, pp. 277–286, 2002.
F. M. Li, K. Kishimoto, Y. S. Wang, Z. B. Chen and W. H. Huang, “Vibration control of beams with active constrained layer damping,” Smart Materials and Structures, Vol. 17, No. 6, pp. 065036, 2008.
W. G. Cady, “Piezoelectricity,” New York: Dover, 1964, Vol. 1.
K. R. Kumar and S. Narayanan, “Active vibration control of beams with optimal placement of piezoelectric sensor/actuator pairs,” Smart Materials and Structures, Vol. 17, No. 5, pp. 055008, 2008.
Zheng, K. (2008) ‘Active vibration control of adaptive truss structure using fuzzy neural network,’ Chinese Control and Decision Conference, pp. 4872–4875.
Zheng, K. (2010) ‘Intelligent vibration control of piezo-electric truss structure using GA-based fuzzy neural network,’ Proc. 8th World Congr. Intell. Control Auto., pp. 5136–5139, Jinan, China.
M. Petyt, “Introduction to finite element vibration analysis,” Cambridge University Press, New York, 2nd Ed., 2010.
Z. C. Qiu, X. M. Zhang, H. X. Wu and H. H. Zhang, “Optimal placement and active vibration control for piezoelectric smart cantilevered plate,” Journal of Sound and Vibrations, Vol. 301, pp. 521–543, 2007.
Ikeda T, “Fundamentals of piezoelectricity,” Oxford University Press, UK, 1996.
V. Gupta, M. Sharma, N. Thakur, “Active structural vibration control: robust to temperature variations,” Mechanical Systems and Signals Processing, Vol. 33, pp. 167–180, 2012.
J. H. Han and I. Lee, “Optimal placement of piezoelectric sensors and actuators for vibration control of a composite plate using genetic algorithm,” Smart Materials and Structures, Vol. 8, No. 2, pp. 257–267,1999.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sukesha (2019). Effect of Location of Piezoelectric Sensor Over a Smart Structure. In: Nath, V., Mandal, J. (eds) Proceeding of the Second International Conference on Microelectronics, Computing & Communication Systems (MCCS 2017). Lecture Notes in Electrical Engineering, vol 476. Springer, Singapore. https://doi.org/10.1007/978-981-10-8234-4_42
Download citation
DOI: https://doi.org/10.1007/978-981-10-8234-4_42
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8233-7
Online ISBN: 978-981-10-8234-4
eBook Packages: EngineeringEngineering (R0)