Advertisement

A Virtual Instrumentation-Based Data Acquisition System for Vibration Monitoring and Analysis

  • S. M. ShyniEmail author
  • K. Vasanth
  • C. Bhuvaneswari
Conference paper
Part of the Lecture Notes in Networks and Systems book series (LNNS, volume 33)

Abstract

The proposed work aims at monitoring the vibration of the bridge in virtual instrumentation namely LabVIEW for finding the age of the bridge ensuring the safety. The vibration is measured by the vibration sensor and the output is monitored through the PC by virtual instrumentation method. Embedded Controller is programmed to read the sensor value. The vibration sensor is connected to the Analog-to-Digital Converter of the controller through the signal conditioning. Then, the output is transmitted to the PC through the wireless technology. The firmware for the microcontroller is done by embedded ‘C’ program. The LabVIEW software processes the data from serial port of the PC and takes the appropriate precautions and actions to prevent the bridge from further damage.

Keywords

Data acquisition Monitoring Vibration Sensors LabVIEW 

References

  1. 1.
    Zhang Q, Zhu T, Zhang J, Chiang KS (2013) Micro-fiber-based FBG sensor for simultaneous measurement of vibration and temperature. IEEE Photonics Technol Lett 25(18):1751–1753Google Scholar
  2. 2.
    Whelan MJ, Gangone MV et al (2009) Real-time wireless vibration monitoring for operational modal analysis of an integral abutment highway bridge. Eng Struct:2224–2235Google Scholar
  3. 3.
    Whelan MJ, Gangone MV, Janoyan KD (2009) Highway bridge assessment using an adaptive real-time wireless sensor network. IEEE Sens J 9(11):1405–1413Google Scholar
  4. 4.
    Gani A, Salami MJE (2002) A LabVIEW based data acquisition system for vibration monitoring and analysis. In: Student conference on research and development, pp 62–65Google Scholar
  5. 5.
    Zhao H (2011) Application of LabVIEW in the design of data acquisition and signal processing system of mechanical vibration. In: International conference on mechatronic science, electric engineering and computer, pp 2551–2554Google Scholar
  6. 6.
    Katalin A (2008) Microcontroller based system for vibration analysis. In: IEEE international conference on automation. Quality and testing. Robotics, vol 2, pp 171–174Google Scholar
  7. 7.
    Chen X, Gao Z et al (2010) Application of wavelet analysis in vibration signal processing of bridge structure. In: International conference on measuring technology and mechatronics automation, vol 1, pp 671–674Google Scholar
  8. 8.
    Ali S, Shaikh FK et al (2014) Smart structural monitoring—a case of bridge damage detection. In: International conference on wireless communications, vehicular technology. Information theory and aerospace & electronic systems, pp 1–5Google Scholar
  9. 9.
    Meyyappan L, Jose M et al (2003) Fuzzy-neuro system for bridge health monitoring. In: International conference of the North American fuzzy information processing society, pp 8–13Google Scholar
  10. 10.
    Shao P, Zhang X, Ge Y (2010) An approach to distributed remote bridges monitoring based on soft middleware. In: International conference on signal acquisition and processing, pp. 172–176Google Scholar
  11. 11.
    Shimoi FN, Cuadra C (2015) Comparison of vibration analysis for a bridge using accelerometers and a piezoelectric cable sensor. In: IEEE multi-conference on systems and control, pp 595–600Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Electrical and Electronics EngineeringSathyabama UniversityChennaiIndia
  2. 2.Department of Electronics and Communication EngineeringVidya Jyothi Institute of TechnologyHyderabadIndia

Personalised recommendations