Advertisement

Application of Moving Average Filter to Train’s Active Control System

  • Xu Wang
  • Jiaxin Ji
  • Peida Hu
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 482)

Abstract

Based on the integrator drift problem of acceleration in active control system, a method using the moving average filter on the original acceleration signal was adopted, which filtered out the DC component of curve passing to ensure the active control system work properly. The principle of the moving average filter was illustrated, and some influencing factors of real-time filter were analyzed. Compensating the static error caused by the ramp function to the low frequency component, a high-pass filter with 0.2 Hz cut-off frequency was designed. Using the active control model of vehicle system, the designed filter was simulation analyzed. In addition, the filter was used to process the acceleration information measured on the actual line. The simulation and experimental results indicated that the moving average filter can effectively filter out the centrifugal acceleration of curve passing, and inhibit integral drift, without significant influence on the performance of the active control system.

Keywords

Moving average filter Active control Integrator drift High-speed train DC component 

Notes

Acknowledgements

This work is partially supported by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No. 2015BAG12B01).

References

  1. 1.
    Karnopp D, Crosby MJ, Harwood RA (1974) Vibration control using semi-active force generators. J Eng Ind 96(2):619–626CrossRefGoogle Scholar
  2. 2.
    Venhovens PJT (1994) The development and implementation of adaptive semi-active suspension control. Veh Syst Dyn 23(1):211–235CrossRefGoogle Scholar
  3. 3.
    Kim RK, Hong KS (2007) Skyhook control using a full-vehicle model and four Relative Displacement Sensors. In: International conference on control, automation and systems. IEEE pp 268–272Google Scholar
  4. 4.
    Cui P, Zhang H, Lam J et al (2013) Real-time Kalman filtering based on distributed measurements. Int J Robust Nonlinear Control 23(14):1597–1608MathSciNetCrossRefzbMATHGoogle Scholar
  5. 5.
    Schenkendorf R, Mangold M (2013) Online model selection approach based on Unscented Kalman Filtering. J Process Control 23(1):44–57CrossRefGoogle Scholar
  6. 6.
    Hoshiya M, Saito E (1984) Structural identification by extended Kalman Filter. J Eng Mech 110(12):1757–1770CrossRefGoogle Scholar
  7. 7.
    Ding F (2014) Combined state and least squares parameter estimation algorithms for dynamic systems. Appl Math Model 38(1):403–412MathSciNetCrossRefGoogle Scholar
  8. 8.
    Donald LMARGOLLS (1982) The response of active and semi-active suspensions to realistic feedback signals. Veh Syst Dyn 11(11):267–282Google Scholar
  9. 9.
    Gabriel F, Belie FD, Neyt X et al (2013) High-frequency issues using rotating voltage injections intended for position self-sensing. IEEE Trans Industr Electron 60(12):5447–5457CrossRefGoogle Scholar
  10. 10.
    Robles E, Pou J, Ceballos S et al (2011) Frequency-adaptive stationary-reference-frame grid voltage sequence detector for distributed generation systems. IEEE Trans Ind Electron 58(9):4275–4287CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.R&D Center, CRRC Qingdao Sifang Co., LTDQingdaoChina
  2. 2.College of Mechanical and Electronic EngineeringChina University of PetroleumQingdaoPeople’s Republic of China
  3. 3.Department of Precision InstrumentsTsinghua UniversityHaidian District, BeijingChina

Personalised recommendations