Analysis on the Vehicle Network Harmonic Oscillation and Its Influencing Factors of China’s Electrified Railway

  • Yue Xu
  • Peng Lin
  • Shihui Liu
  • Fei Lin
  • Zhongping Yang
Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 482)

Abstract

With the rapid development of China’s electrified railway, vehicle network harmonic oscillation attracts more attention. The four-quadrant converter is an important part of the traction drive system. Based on its main circuit and control strategy, different vehicle network harmonic oscillation are classified by the mechanism and frequency into mediate-frequency harmonic oscillation and high- frequency harmonic oscillation. Their control loop transfer function are established separately and their main influencing factors are analyzed. Use the main circuit parameters of China’s electrified railway to establish a Simulink model. Analyze current wave and its FFT result to compare the harmonic oscillation situation. The simulation results verify the correctness of the analysis.

Keywords

Four-quadrant converter Vehicle network Electrified railway Harmonic oscillation Influencing factors 

Notes

Acknowledgements

This work was supported by a grant from the Major State Basic Research Development Program of China (973 Program: 2011CB711100).

References

  1. 1.
    Xi C, Fei L, Yang Z (2013) Analysis of high frequency oscillations in the power supply line of the high speed train. Trans China Electrotech Soc S2:354–359Google Scholar
  2. 2.
    Liu J, Yang Q, Zheng TQ (2012) Harmonic analysis of traction networks based on the CRH380A series EMUs accident. In: IEEE transportation electrification conference and expo (ITEC), Dearborn, MI, pp 1–6Google Scholar
  3. 3.
    Fernandez E, Paredes A, Sala V, Romeral L (2017) Control and modulation techniques applied to converters with impedances networks for traction systems. IEEE Lat Am Trans 15(1):21–30CrossRefGoogle Scholar
  4. 4.
    Liu Z, Zhang G, Liao Y (2016) Stability research of high-speed railway EMUs and traction network cascade system considering impedance matching. IEEE Trans Ind Appl 52(5):4315–4326 (Sept–Oct 2016)Google Scholar
  5. 5.
    Cheng X, Song W, Feng X (2016) Finite control-set model predictive current control of five-phase permanent-magnet synchronous machine based on virtual voltage vectors. IET Electr Power Appl:2016. ISSN 1751-8660Google Scholar
  6. 6.
    Zhou X, Yang C, Cai T (2016) A model reference adaptive control/PID compound scheme on disturbance rejection for an aerial inertially stabilized platform. J Sens 2016:1. ISSN 1687-725XGoogle Scholar
  7. 7.
    Lin Z, Su B, Xu B (2016) Application of deadbeat control method in Co-phase traction power supply system. In: Control conference (CCC) 2016 35th Chinese, pp 10198–10203. ISSN 1934-1768Google Scholar
  8. 8.
    Chang GW, Lin H-W, Chen S-K (2004) Modeling characteristics of harmonic currents generated by high-speed railway traction drive converters. IEEE Trans Power Delivery 19(2):766–773 (April 2004)Google Scholar
  9. 9.
    Chang GW, Lin H-W, Chen S-K (2004) Modeling characteristics of harmonic currents generated by high-speed railway traction drive converters. IEEE Trans Power Delivery 19(2):766–773 (April 2004)Google Scholar
  10. 10.
    Lee H, Lee C, Jang G, Kwon S (2006) Harmonic analysis of the korean high-speed railway using the eight-port representation model. IEEE Trans Power Delivery 21(2):979–986 (April 2006)Google Scholar
  11. 11.
    Lian Q, Lin F, Wei S, Yang Z, Sun H (2015) Analysis of nonlinear oscillation of four-quadrant converter in high-speed trians based on discrete model. In: Industrial electronics society, IECON 2015—41st annual conference of the IEEE, Yokohama, Japan, pp 002124–002129Google Scholar
  12. 12.
    Wang H, Mingli W, Sun J (2015) Analysis of low-frequency oscillation in electric railways based on small-signal modeling of vehicle-grid system in dq frame. IEEE Trans Power Electron 30(9):5318–5330CrossRefGoogle Scholar
  13. 13.
    Brenna M, Foiadelli F, Zaninelli D (2011) New stability analysis for tuning PI controller of power converters in railway application. IEEE Trans Ind Electron 58(2):533–543CrossRefGoogle Scholar
  14. 14.
    Lin F, Liu S, Yang Z et al (2016) Analysis of nonlinear oscillation of four-quadrant converter based on discrete describing function approach. 13(17)Google Scholar
  15. 15.
    Zheng J, Feng X, Xie W, Zhang J (2009) The transient current control for single phase PWM rectifiers. Power Electron 43(12):2–3Google Scholar
  16. 16.
    Liu S, Yang Z, Lin F et al (2016) Medium-frequency oscillation analysis in high-speed railway system considering power supply system with LCL model. In: IECON 2016—conference of the IEEE industrial electronics society. IEEE, pp 3470–3475Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Yue Xu
    • 1
  • Peng Lin
    • 1
  • Shihui Liu
    • 2
  • Fei Lin
    • 2
  • Zhongping Yang
    • 2
  1. 1.CRRC Qingdao Sifang CO., Ltd.Chengyang District, QingdaoChina
  2. 2.School of Electrical EngineeringBeijing Jiaotong UniversityBeijingChina

Personalised recommendations