Abstract
The combustion process in internal combustion engines can occur in multiple modes. In spark-ignition (SI) engines it is mainly a turbulent premixed flame propagation process; however, since the charge is at elevated temperature and pressure, it is possible to have autoignition in the unburned charge, which can lead to engine knock. In conventional Diesel engines, the combustion process is first started with the onset of ignition and followed by turbulent diffusion flames. In the development of modern compression ignition engines, the tendency is to use a mixed mode combustion in order to reduce soot and NOx emissions. Examples of such engine concepts are homogeneous charge compression ignition (HCCI), reactivity controlled compression ignition (RCCI), and partially premixed combustion (PPC) engines. To meet the challenge of high-performance numerical simulations in today’s engine design it is necessary that the simulation models shall handle the different modes of combustion. In this chapter, the various combustion modes will be reviewed. Recent simulation results that reveal the finely detailed reaction zone structures in HCCI, RCCI, and PPC engines will be discussed. The challenges in the modeling of multiple modes combustion in internal combustion engine will be discussed in the frameworks of large-eddy simulation and Reynolds-averaged Navier–Stokes simulations. Finally, state-of-the-art models for the various combustion modes will be reviewed, focusing on the modeling of multimodes combustion problems.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Aceves SM, Flowers DL, Westbrook CK, Smith JR, Dibble RW, Christensen M, Pitz WJ, Johansson B (2000) A multi-zone model for prediction of HCCI combustion and emissions. SAE Technical Paper 2000-01-0327
Babajimopoulos A, Assanis DN, Flowers DL, Aceves SM, Hessel RP (2015) A fully coupled computational fluid dynamics and multi-zone model with detailed chemical kinetics for the simulation of premixed charge compression ignition engines. Int J Eng Res 6:497–512
Bisetti F, Chen JY, Chen JH, Hawkes ER (2009) Differential diffusion effects during the ignition of a thermally stratified premixed hydrogen-air mixture subject to turbulence. Proc Combust Inst 32:1465–1472
Bray KNC, Libby PA, Moss JB (1985) Unified modeling approach for premixed turbulent combustion-part I: general formulation. Combust Flame 61:87–102
Candel SM, Poinsot TJ (1990) Flame stretch and the balance equation for the flame area. Combust Sci Technol 70:1–15
Carlsson H, Nordstrm E, Bohlin A, Wu Y, Zhou B, Li ZS, Alden M, Bengtsson PE, Bai XS (2015) Numerical and experimental study of flame propagation and quenching of lean premixed turbulent low swirl flames at different Reynolds numbers. Combust Flame 162:2582–2591
Chen JH (2011) Petascale direct numerical simulation of turbulent combustion-fundamental insights towards predictive models. Proc Combust Inst 33:99–123
Chen JH, Hawkes ER, Sankaran R, Mason SD, Im HG (2006) Direct numerical simulation of ignition front propagation in a constant volume with temperature inhomogeneities: I. Fundamental analysis and diagnostics. Combust Flame 145:128–144
Christensen M, Johansson B, Franke A, Richter M, Alden M (1999) A study of the homogeneous charge compression ignition combustion process by chemiluminescence imaging, SAE Technical Paper 1999-01-3680
Colin O, Benkenida A (2004) The 3-Zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion. Oil Gas Sci Technol Rev IFP 59:593–609
Colin O, Ducros F, Veynante D, Poinsot T (2000) A thickened flame model for large eddy simulations of turbulent premixed combustion. Phys Fluids 12:1843
De Paola G, Mastorakos E, Wright YM, Boulouchos K (2008) Diesel Engine Simulations with Multi-Dimensional Conditional Moment Closure. Combust Sci Technol 180:883–899
Dec JE (1997) A conceptual model of DI diesel combustion based on laser-sheet imaging, SAE Technical Paper 970873
Dempsey AB, Walker NR, Reitz R (2013) Effect of piston bowl geometry on dual fuel reactivity controlled compression ignition (RCCI) in a light-duty engine operated with gasoline/diesel and methanol/diesel. SAE Int J Eng 6:78–100
D’Errico G, Lucchini T, Contino F, Jangi M, Bai XS (2014) Comparison of well-mixed and multiple representative interactive flamelet approaches for diesel spray combustion modelling. Combust Theor Modell 18:65–88
Dunstan TD, Minamoto Y, Chakraborty N, Swaminathan N (2013) Scalar dissipation rate modelling for Large Eddy Simulation of turbulent premixed flames. Proc Combust Inst 34:1193–1201
Felsch C, Luckhchoura V, Weber J, Peters N, Hasse C, Wiese W, Pischinger S, Kolbeck A, Adomeit P (2007) Applying representative interactive flamelets (RIF) with special emphasis on pollutant formation to simulate a DI diesel engine with roof-shaped combustion chamber and tumble charge motion, SAE Technical Paper 2007–01–0167
Flowers D, Aceves S, Martinez-Frias J, Hessel R, Dibble R (2003) Effect of mixing on hydrocarbon and carbon monoxide emissions prediction for iso-octane HCCI engine combustion using a multi-zone detailed kinetics solver. SAE Technical Paper 2003–01–1821
Ge HW, Shi Y, Reitz RD, Willems WW (2010) Engine development using multi-dimensional CFD and computer optimization, SAE Technical Paper 2010-01-0360
Germano M, Piomelli U, Moin P, Cabot WH (1991) A dynamic subgrid-scale eddy viscosity model. Phys Fluids A: Fluid Dyn 3(7):1760–1765
Goldin GM, Ren Z, Zahirovic S (2009) A cell agglomeration algorithm for accelerating detailed chemistry in CFD. Combust Theor Modell 13(4):721–739
Gong C, Jangi M, Bai XS (2014) Large eddy simulation of n-Dodecane spray combustion in a high pressure combustion vessel. Appl Energy 136:373–381
Hanson R, Splitter D, Reiz RD (2009) Operating a heavy-duty direct-injection compression-ignition engine with gasoline for low emissions. SAE Paper 2009-01-1442
Hasse C, Barths H, Peters N (1999) Modelling the effect of split injections in diesel engines using representative interactive flamelets, SAE Technical Paper 1999–01–3547
Hawkes ER, Sankaran R, Pebay PP, Chen JH (2006) Direct numerical simulation of ignition front propagation in a constant volume with temperature inhomogeneities II. Parametric study. Combust Flame 145:145–159
Haworth DC (1999) Large-eddy simulation of in-cylinder flows, Oil & Gas Science and Technology-Rev. IFP 54:175–185
Haworth DC (2010) Progress in probability density function methods for turbulent reacting flows. Prog Energy Combust Sci 36:168–259
Heywood JB (1988) Internal combustion engine fundamentals. McGraw Hill Book Company, New York
Hodzic E, Jangi M, Szasz RZ, Bai XS (2017) Large eddy simulation of bluff body flames close to blow-off using an Eulerian stochastic field method. Combust Flame 181:1–15
Hu SY, Gong C, Bai XS (2017) Dual fuel combustion of n-heptane/methanol-air-EGR mixtures. Energy Procedia 105:4943–4948
Jangi M, Bai XS (2012) Multidimensional chemistry coordinate mapping approach for combustion modelling with finite-rate chemistry. Combust Theor Model 16:1109–1132
Jangi M, Yu R, Bai XS (2011) A multi-zone chemistry mapping approach for direct numerical simulation of auto-ignition and flame propagation in a constant volume enclosure. Combust Theor Model 16(2):221–249
Jangi M, Zhao X, Haworth DC, Bai XS (2015) Stabilization and liftoff length of a non-premixed methane/air jet flame discharging into a high-temperature environment: An accelerated transported PDF method. Combust Flame 162(2):408–419
Jangi M, Lucchini T, Gong C, Bai XS (2015) Effects of fuel cetane number on the structure of diesel spray combustion: An accelerated Eulerian stochastic fields method. Combust Theor Modell 19:549–567
Jangi M, Li C, Shamun S, Tuner M, Bai XS (2017) Modelling of methanol combustion in a direct injection compression ignition engine using an accelerated stochastic fields method. Energy Procedia 105:1326–1331
Jangi M, Lucchini TG, D’ Errico, Bai XS (2013) Effects of EGR on the structure and emissions of diesel combustion. Proc Combust Inst 34:3091–3098
Joelsson T, Yu R, Bai XS (2012) Large eddy simulation of turbulent combustion in a spark-assisted homogenous charge compression ignition engine. Combust Sci Technol 84:1051–1065
Kalghatgi G, Risberg P, Angstrom H (2007) Partially pre-mixed auto-ignition of gasoline to attain low smoke and low NOx at high load in a compression ignition engine and comparison with a diesel fuel. SAE Paper 2007-01-0006
KIim WT, Huh KY (2002) Numerical simulation of spray autoignition by the first-order conditional moment closure model. Proc Combust Inst 29(2002):569–576
Klimenko AY, Bilger RW (1999) Conditional moment closure for turbulent combustion. Prog Energy Combust Sci 25:595–687
Knop V, Michel JB, Colin O (2011) On the use of a tabulation approach to model auto-ignition during flame propagation in SI engines. Appl Energy 88:4968–4979
Kokjohn SL, Hanson RM, Splitter DA, Reitz RD (2011) Fuel reactivity controlled compression ignition (RCCI): a pathway to controlled high-efficiency clean combustion. Int J Eng Res 12:209–226
Kong SC, Han Z, Reitz RD (1995) The development and application of a diesel ignition and combustion model for multidimensional engine simulation, SAE Technical paper 950278. https://doi.org/10.4271/950278
Lam SH, Goussis DA (1988) Understanding complex chemical kinetics with computational singular perturbation. Proc Combust Inst 22:931–941
Lecocq G, Richard S, Michel JB, Vervisch L (2011) A new LES model coupling flame surface density and tabulated kinetics approaches to investigate knock and pre-ignition in piston engines. Proc Combust Inst 33:3105–3114
Li Y, Jia M, Hang Y, Liu Y, Xie M, Wang T et al (2014) Parametric study and optimization of a RCCI (reactivity controlled compression ignition) engine fueled with methanol and diesel. Energy 65:319–332
Liang L, Stevens JG, Farrell JT (2009) A dynamic adaptive chemistry scheme for reactive flow computations. Proc Combust Inst 32:527–534
Lu T, Law CK (2005) A directed relation graph method for mechanism reduction. Proc Combust Inst 30:1333–1341
Maas U, Pope SB (1992) Simplifying chemical kinetics: intrinsic low-dimensional manifolds in composition space. Combust Flame 88:239–264
Magnussen BF, Hjertager BH (1977) On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion. Symposium (International) on Combustion 16:719–729
Manente V, Johansson B, Tunestal P (2010) Characterization of partially premixed combustion with ethanol: EGR sweeps, low and maximum loads. J Eng Gas Turbines Power 132:082802
Manente V, Johansson B, Tunestal P (2009) Partially premixed combustion at high load using gasoline and ethanol, a comparison with diesel. SAE Technical Paper, 2009-01-0944
Marble FE, Broadwell JE (1977) The coherent flame model for turbulent chemical reactions, Project Squid, Technical Report TRW-9-PU
Martz JB, Kwak H, Im HG, Lavoie GA, Assanis DN (2011) Combustion regime of a reacting front propagating into an auto-igniting mixture. Proc Combust Inst 33:3001–3006
Masimalai SK (2014) Influence of methanol induction on performance, emission and combustion behavior of a methanol–diesel dual fuel engine, SAE Technical Paper 2014-01-1315
Mastorakos E, Bilger RW (1998) Second-order conditional moment closure for the autoignition of turbulent flows. Phys Fluids 10:1246
Mittal V, Cook DJ, Pitsch H (2012) An extended multi-regime flamelet model for IC engines. Combust Flame 159:2767–2776
Najt PM, Foster DE (1983) Compression ignited homogeneous charge combustion. SAE Technical paper 830264
Nilsson P, Bai XS (2000) Level-set flamelet library approach for premixed turbulent combustion. Experiment Thermal Fluid Sci 21:87–98
Nogenmyr KJ, Fureby C, Bai XS, Petersson P, Collin R, Linne M (2009) Large eddy simulation and laser diagnostic studies on a low swirl stratified premixed flame. Combust Flame 156:25–36
Onishi S, Jo SH, Shoda K, Jo PD, Kato S (1979) Active thermo-atmosphere combustion–a new combustion process for internal combustion engines. SAE Technical paper 790501
Pan J, Wei H, Shu G, Chen Z, Zhao P (2016) The role of low temperature chemistry in combustion mode development under elevated pressures. Combust Flame 174:179–193
Persson H, Babajimopoulos A, Helmantel A, Holst F, Stenmark E (2017) Development of the combustion system for volvo cars Euro6d VEA diesel engine, SAE Technical Paper 2017-01-0713. https://doi.org/10.4271/2017-01-0713
Peters N (2000) Turbulent combustion, Cambridge University Press
Pitsch H, Barths H, Peters N (1996) Three-dimensional modeling of NOx and soot formation in DI-diesel engines using detailed chemistry based on the interactive flamelet approach, SAE Technical Paper 962057
Popa MG, Megurescu N, Pana C, Racovitza A (2001) Results obtained by methanol fuelling diesel engine. SAE Technical Paper 2001-01-3748
Pope SB (1985) Pdf methods for turbulent reactive flows. Prog Energy Combust Sci 11:119–192
Pope SB (1988) The evolution of surfaces in turbulence. Int J Eng Sci 26:445–469
Pope SB (1997) Computationally efficient implementation of combustion chemistry using in situ adaptive tabulation. Combust Theor Modell 1:41–63
Reitz RD (1987) Modeling atomization processes in high-pressure vaporizing sprays. Atomizat Spray Technol 3:309–337
Reitz RD, Ganesh D (2015) Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines. Prog Energy Combust Sci 46:12–71
Reitz RD, Rutland CJ (1995) Development and testing of diesel engine CFD models. Prog Energy Combust Sci 21:173–196
Rutland CJ (2011) Large-eddy simulations for internal combustion engines-a review. Int J Eng Res 12:421–451
Sankaran R, Im HG, Hawkes ER, Chen JH (2005) The effects of non-uniform temperature distribution on the ignition of a lean homogeneous hydrogen-air mixture. Proc Combust Inst 30:875–882
Smagorinsky J (1963) General circulation experiments with the primitive equations: I. The basic equations. Mon Weather Rev 91:99–164
Solsjo R, Jangi M, Chartier C, Andersson O, Bai XS (2013) Lift-off and stabilization of n-heptane combustion in a diesel engine with a multiple-nozzle injection. Proc Combust Inst 34:3031–3038
Solsjo R, Jangi M, Tuner M, Bai XS (2012) Large eddy simulation of partially premixed combustion in an internal combustion engine. SAE Technical Paper 2012-01-0139
Swaminathan N, Bilger RW (1999) Assessment of combustion submodels for turbulent nonpremixed hydrocarbon flames. Combust Flame 116:519–545
Tan Z, Reitz RD (2006) An ignition and combustion model based on the level-set method for spark ignition engine multidimensional modeling. Combust Flame 145:1–15
Thring RH (1989) Homogeneous charge compression ignition (HCCI) engines. SAE Technical paper 892068
van Oijen JA, Donini A, Bastiaans RJM, ten Thije Boonkkamp JHM, de Goey LPH (2016) State-of-the-art in premixed combustion modeling using flamelet generated manifolds. Prog Energy Combust Sci 57(2016):30–74
Vermorel O, Richard S, Colin O, Angelberger C, Benkenida A, Veynante D (2009) Towards the understanding of cyclic variability in a spark ignited engine using multi-cycle LES. Combust Flame 156:1525–1541
Yao C, Cheung CS, Cheng C, Wang Y, Chan TL, Lee SC (2008) Effect of diesel/methanol compound combustion on diesel engine combustion and emissions. Energy Convers Manag 49:1696–1704
Yao M, Zheng Z, Liu H (2009) Progress and recent trends in homogeneous charge compression ignition (HCCI) engines. Prog Energy Combust Sci 35:398–437
Yoo CS, Lu T, Chen JH, Law CK (2011) Direct numerical simulations of ignition of a lean n-heptane/air mixture with temperature inhomogeneities at constant volume: parametric study. Combust Flame 158:1727–1741
Yu R, Bai XS (2013) Direct numerical simulation of lean hydrogen/air auto-ignition in a constant volume enclosure. Combust Flame 160:1706–1716
Yu R, Yu J, Bai XS (2012) An improved high-order scheme for DNS of low Mach number turbulent reacting flows based on stiff chemistry solver. J Comput Phys 231:5504–5521
Yu R, Bai XS, Lehtiniemi H, Ahmed SS, Mauss F, Richter M, Alden M, Hildingsson L, Johansson B, Hultqvist A (2006) Effect of turbulence and initial temperature inhomogeneity on homogeneous charge compression ignition combustion. SAE Technical Paper, 2006-01-3318
Yu R, Bai XS, Vressner A, Hultqvist A, Johansson B, Olofsson J, Seyfried H, Sjoholm JO, Richter M, Alden M (2007) Effect of turbulence on HCCI combustion. SAE Technical Paper, 2007-01-0183
Zeldovich YB (1980) Regime classification of an exothermic reaction with nonuniform initial conditions. Combust Flame 39:211–214
Zhang F, Yu R, Bai XS (2012) Detailed numerical simulation of syngas combustion under partially premixed combustion engine conditions. Int J Hydro Energy 37:17285–17293
Zhang F, Liu HF, Yu R, Yao M, Bai XS (2016) Direct numerical simulation of H\(_2\)/air combustion with composition stratification in a constant volume enclosure relevant to HCCI engines. Int J Hydrog Energy 41:13758–13770
Zhang F, Yu R, Bai XS (2015a) Direct numerical simulation of PRF70/air partially premixed combustion under IC engine conditions. Proc Combust Inst 35:2975–2982
Zhang F, Yu R, Bai XS (2015b) Effect of split fuel injection on heat release and pollutant emissions in partially premixed combustion of PRF70/air/EGR mixtures. Appl Energy 149:283–296
Acknowledgements
The author acknowledges the financial support from the Swedish Energy Agency through KC-FP and CeCOST.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Bai, XS. (2018). Numerical Simulation of Turbulent Combustion in Internal Combustion Engines. In: De, S., Agarwal, A., Chaudhuri, S., Sen, S. (eds) Modeling and Simulation of Turbulent Combustion. Energy, Environment, and Sustainability. Springer, Singapore. https://doi.org/10.1007/978-981-10-7410-3_17
Download citation
DOI: https://doi.org/10.1007/978-981-10-7410-3_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-7409-7
Online ISBN: 978-981-10-7410-3
eBook Packages: EngineeringEngineering (R0)