Skip to main content

Design and Development of DAQ and Processing System for FMCW RADAR

  • Conference paper
  • First Online:
Book cover Proceedings of the International Conference on Intelligent Systems and Signal Processing

Part of the book series: Advances in Intelligent Systems and Computing ((AISC,volume 671))

  • 731 Accesses

Abstract

Frequency-modulated continuous wave radar is generally used for calculating range and speed of any target. A research paper is intended to develop back-end electronics for frequency-modulated continuous wave (FMCW) radar with optimum usage of field-programmable gate array (FPGA)-based processing unit. Sampling of the received IQ (in-phase and quadrature-phase) signals is done at speed of 500 KSPS using 12-bit ADC128S102. Acquired data is further stored into internal memory of FPGA for post-processing. Zero-crossing algorithm is implemented on the received signal to obtain the beat frequency of the same. Moreover, stored data and processed data are transferred to the computer using SPI protocol. LabVIEW-based simulator is also developed to process the received data and retrieve the beat frequency from it.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Institutional subscriptions

References

  1. Yizheng Liao, “Phase and Frequency Estimation: High-Accuracy And Low-Complexity Techniques”.

    Google Scholar 

  2. Vaughn Betz, Jonathan Rose, “Using Architectural “Families” to Increase FPGA Speed and Density”.

    Google Scholar 

  3. Rodger H. Hosking “Use FPGA resources to boost radar system performance”, RF Design Defense electronics.rfdesign.com/mag/510RFDSF2.pdf.

    Google Scholar 

  4. James J. Alter, Jeffrey O. Coleman, RADAR Handbook, Ch-25 Radar Digital Signal Processing, Naval Research Laboratory 1010505.

    Google Scholar 

  5. Texas Instruments, Analog to Digital Converters Available: www.ti.com/lit/ds/symlink/adc128s102.pdf.

  6. XILINX. Spartan-3 Generation FPGA User Guide: Extended Spatan-3E, and Spartan-3 FPGA Families UG331,V1.8.available: http://www.xilinx.com/support/documentation/userGuides/ug331.pdf.

  7. Yan Wu, J.P.M.G. Linnartz, “Detection Performance Improvement of FMCW Radar Using Frequency Shift”. IEEE MAY 10–11, 2011.

    Google Scholar 

  8. Keyur K. Mahant, Amit V. Patel, Alpesh Vala, Riddhi Goswami “FPGA based temperature control and monitoring system for X-ray measurement instrument”.

    Google Scholar 

  9. R.W.W all “simple methods for detecting zero crossing”. IEEE, proceedings of the 29th annual conference of IEEE.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Rucha Joshi .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Joshi, R., Patel, A., Mahant, K., Mewada, H. (2018). Design and Development of DAQ and Processing System for FMCW RADAR. In: Kher, R., Gondaliya, D., Bhesaniya, M., Ladid, L., Atiquzzaman, M. (eds) Proceedings of the International Conference on Intelligent Systems and Signal Processing . Advances in Intelligent Systems and Computing, vol 671. Springer, Singapore. https://doi.org/10.1007/978-981-10-6977-2_6

Download citation

  • DOI: https://doi.org/10.1007/978-981-10-6977-2_6

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-10-6976-5

  • Online ISBN: 978-981-10-6977-2

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics