Advertisement

Active Regeneration of Diesel Particulate Filter Using Microwave Energy for Exhaust Emission Control

  • Caneon Kurien
  • Ajay Kumar Srivastava
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 624)

Abstract

The toxic nature of the exhaust gases emitted from diesel engines has led to the development of emission control systems like diesel oxidation catalysis, diesel particulate filtration and selective catalytic reduction. The particulate matter emitted by these engines is found to be carcinogenic in nature. Diesel particulate filter (DPF) is used for trapping the particulate matter which consists of soluble organic fraction and soot particles. The regeneration of these accumulated soot particles is one of the major problems faced in these systems. Active regeneration takes place in the traditional DPF by injecting the fuel to the filter and then initiating combustion by introducing spark. It will lead to uncontrolled combustion causing serious damage to the filter. Electromagnetic waves in microwave region can be used for regeneration of the accumulated soot. Detailed literature survey has been carried out on the application of microwave energy for the regeneration purpose, and an emission control system has been proposed in this paper.

Keywords

Catalyst Emission Microwaves Soot Regeneration 

References

  1. 1.
    Lee, Chanmin, et al. “Ag supported on electrospun macro-structure CeO 2 fibrous mats for diesel soot oxidation.” Applied Catalysis B: Environmental 174 (2015): 185–192.Google Scholar
  2. 2.
    Taibani, Arif Zakaria, and Vilas Kalamkar. “Experimental and computational analysis of behavior of three-way catalytic converter under axial and radial flow conditions.” International Journal of Fluid Machinery and Systems 5.3 (2012): 134–142.Google Scholar
  3. 3.
    Huang, Haifeng, et al. “Promoting effect of vanadium on catalytic activity of Pt/Ce–Zr–O diesel oxidation catalysts.” Journal of Environmental Sciences 33 (2015): 135–142.Google Scholar
  4. 4.
    Herreros, J. M., et al. “Enhancing the low temperature oxidation performance over a Pt and a Pt–Pd diesel oxidation catalyst.” Applied Catalysis B: Environmental 147 (2014): 835–841.Google Scholar
  5. 5.
    Hayes, R. E., et al. “CFD modelling of the automotive catalytic converter.” Catalysis today 188.1 (2012): 94–105.Google Scholar
  6. 6.
    Corro, Grisel, et al. “Hydrogen-reduced Cu/ZnO composite as efficient reusable catalyst for diesel particulate matter oxidation.” Applied Catalysis B: Environmental 165 (2015): 555–565.Google Scholar
  7. 7.
    Palma, Vincenzo, et al. “Catalytic DPF microwave assisted active regeneration.” Fuel 140 (2015): 50–61.Google Scholar
  8. 8.
    Guan, Chun, et al. “Effects of fuel injection strategies on emissions characteristics of a diesel engine equipped with a particle oxidation catalyst (POC).” Journal of Environmental Chemical Engineering 4.4 (2016): 4822–4829.Google Scholar
  9. 9.
    Bin Zhang, Jiaqiang E, Jinke Gong, Wenhua Yuan, Wei Zuo, Yu Li, Jun Fu, (2016) Multidisciplinary design optimization of the diesel particulate filter in the composite regeneration process. Applied Energy 181:14–28Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Mechanical Engineering DepartmentUniversity of Petroleum and Energy StudiesDehradunIndia

Personalised recommendations