Abstract
Sealing performance of multi cylinder packer is analyzed by using finite element analysis method in this paper. The setting process is analyzed by apply different sealing load to the multi cylinder packer, and it is found that the different sealing load will cause the different gap between the rubber tube and the central tube in the packer. Thus, the position of the main seal in the multi cylinder packer is thus obtained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Xinke Yang, Shaer Hai (2012) Discussion on design idea of rubber cylinder for compression packer. J Xinjiang Oil Gas 01:115–118
Dou Y, Ma Z, Chen J et al (2015) Finite element analysis of mechanical behavior of THT packer rubber cylinder. J Oil Gas Well Test 03:4-7-75
Zhang L, Shen G, Li Y et al (2007) Development and application of packer technology in China. J Petrol Mach 08:58-60-74-80
Zhang Yuhang Xu, Xiaobing Yang Ya (2015) Analysis of the development of packers at home and abroad. J Mech Eng 01:37–39
Qu Baolong Xu, Huajing Ma Wei (2015) Optimum design of packer rubber cylinder based on friction coefficient. J Petrol Mach 02:83–87
Zhang B, Wang X, Xu X (2009) Improvement of sealant cylinder for high pressure packer. J Petrol Field Mach 01:85–87
Yang Z, Liu D, Xu Y et al (2012) Experimental study on deformation of compression rubber cylinder shoulder. J Lubr Sealing 02:103–105
Datong Qin, Liyang Xie (2011) Manual of modern mechanical design, M. Chem Ind Press, Beijing
Acknowledgements
This research is partly supported by the research programmer of Shanghai Science and technology committee (NO. 14DZ1204203).
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Lu, Lx., Deng, T., Li, Gq., Mitrouchev, P. (2018). Finite Element Analysis of Sealing Performance for Multi Cylinder Packer. In: Wang, K., Wang, Y., Strandhagen, J., Yu, T. (eds) Advanced Manufacturing and Automation VII. IWAMA 2017. Lecture Notes in Electrical Engineering, vol 451. Springer, Singapore. https://doi.org/10.1007/978-981-10-5768-7_12
Download citation
DOI: https://doi.org/10.1007/978-981-10-5768-7_12
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5767-0
Online ISBN: 978-981-10-5768-7
eBook Packages: EngineeringEngineering (R0)