Abstract
This paper compares the performance parameters of rectangular and circular micro-strip antenna for 2.4 GHz RFID wireless applications using IE3D simulation software. The main parameters of comparison are return loss, gain, and area. The main objective of the work is to obtain the reduction in the size of circular antenna compared to rectangular for same frequency of operation. Impedance matching between the feeder line and radiating patch is done using planar micro-strip transmission lines. Quarter wave feeding technique is used for both the antennas to provide best matching between antenna and the source. Simulation is done using IE3D simulation software and parameters like bandwidth, return loss, and gain are measured. Results are optimized using optimizing techniques and results are compared with practically measured results. Finally antennas are fabricated and tested using in-house facilities.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
T. I. Huque, K. Hossain, S. Islam, and A. Chowdhury, “Design and Performance Analysis of Microstrip Array Antennas With Optimum Parameters For X-band Applications,” International Journal of Advanced Computer Science and Applications, Vol. 2, No. 4, pp. 81–87, 2011.
R. Garg, P. Bhartia, I. J. Bahl, and P. Ittipiboon, Microstrip Antenna Design Handbook, Artech House, Boston. London, 2001.
S. Sudharani, P. Rakesh Kumar,“Microstrip Circular Patch Array Antenna for Electronic Toll Collection,” International Journal of Research in Engineering and Technology (IJRET), Vol 2, Jan 2013.
M. M. Olaimat and N. I. Dib, “ A Study of 15-75o-90o Angles Triangular Patch Antenna,” Progress In Electromagnetics Research (PIER), Vol. 21, pp. 1–9, 2011.
M. M. Olaimat and N. I. Dib, “Improved Formulae for the Resonant Frequencies of Triangular Microstrip Patch Antennas,” International Journal of Electronics, Vol. 98, No. 3, pp. 407–424, March 2011.
Olaimat, M., “Design and analysis of triangular microstrip patch antennas for wireless communication systems,” Master Thesis, Jordan University of Science and Technology, 2010.
Prof. Mahesh M. Gadag, Mr. Dundesh S. Kamshetty, Mr. Suresh L. Yogi, Mr. Vinayak C. D “Design and Comparative Study of Different Feeding Mechanisms for Microstrip Antenna for Wireless Communication”, International Conference on Computational Intelligence & Computing Research (IEEEICCIC), 978-1-61284-693-4/11, pp-638-641, December 15–18, 2011.
Prof. Mahesh M. Gadag, Ms. Lubna F Shaikh, Ms. Aahaladika, Mr. Kundan Kumar, “Rectangular Microstrip Antenna using Air-Coupled Parasitic Patches for Bandwidth Improvement”, International Conference on Electronics and Communication Engineering, 978-93-81693-56-8, Vizag, 2012, pp. 45–49.
C. A. Balanis, “Antenna Theory, Analysis and Design,” John Wiley & Sons, New York, 2008, pp 723–725.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte. Ltd.
About this paper
Cite this paper
Gadag, M., Joshi, S., Gadag, N. (2018). Performance Comparison of Rectangular and Circular Micro-Strip Antenna at 2.4 GHz for Wireless Applications Using IE3D. In: Hu, YC., Tiwari, S., Mishra, K., Trivedi, M. (eds) Intelligent Communication and Computational Technologies. Lecture Notes in Networks and Systems, vol 19. Springer, Singapore. https://doi.org/10.1007/978-981-10-5523-2_17
Download citation
DOI: https://doi.org/10.1007/978-981-10-5523-2_17
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5522-5
Online ISBN: 978-981-10-5523-2
eBook Packages: EngineeringEngineering (R0)