Abstract
Linear synchronous reluctance motors (LSRELMs) are becoming an attractive alternative for linear induction motors (LIMs), linear synchronous motors (LSMs), and linear switched reluctance motors (LSRMs). This paper reviews the scientific status, development, and future scope of the LSRELMs. These include analysis techniques, design prospects, control aspects, optimization techniques, and parameter identifications.
References
Jacek Gieras, F., Zbigniew Piech, J., Bronislaw, T.: Linear Synchronous Motors: Transportation and Automation Systems. CRC Press (2011)
Boldea, I., Nasar, S.A.: Linear Electric Actuators and Generators. Cambridge University Press (1997)
Boldea, I., Nasar, S.A.: Thrust and normal forces in a segmented secondary linear reluctance motor. Proc. IEE 122(9), 922–924 (1975)
Zavgorodny, V.D., Arthur Wagner, J., Nasar, S.A.: Segmented secondary linear reluctance motor: analytical and experimental results. Int. J. Electr. Mach. Power Syst. 1(2), 163–174 (1977)
Arthur Wagner, J., Zavgorodny, V.D., Nasar, S.A.: Segmented secondary linear reluctance motor: a parametric study. Int. J. Electr. Mach. Power Syst. 2(1), 1–24 (1977)
Arthur Wagner, J., Zavgorodny, V.D., Nasar, S.A.: Tangential force distribution and force pulsation in a linear reluctance motor. Int. J. Electr. Mach. Power Syst. 2(4), 341–355 (1978)
Edwards, J.D., El-Antably, A.M.: Segmental rotor linear reluctance motors with large airgaps. Proc. IEE 125(3), 209–214 (1978)
El-Antably, A.M., Edwards, J.D., Williams, G., Lindon, P., Luke, P.D.: Steady state performance characteristics of linear reluctance motor. IEEE Trans. Magn. 15(6), 1440–1442 (1979)
Arthur, Wagner J., Cornwall, W.J.: A study of normal force in a toothed linear reluctance motor. Int. J. Electr. Mach. Power Syst. 7(2), 143–153 (1982)
Edwards, J.D., Williams, G., Preston, M.A.: Forces in short secondary linear reluctance motor. IEEE Trans. Magn. 23(5), 2829–2831 (1987)
Edwards, J.D., Preston, M.A.: Forces in screened-secondary linear reluctance motor. IEEE Trans. Magn. 24(6), 2913–2915 (1988)
Stumberger, G., Stumberger, B., Dolinar, D.: Position and current dependent flux linkages, thrust and friction force of linear synchronous reluctance motor. In: Proceedings of 36th IAS Annual Meeting Industry Applications Conference, vol. 4, Chicago, IL, USA, pp. 2310–2317 (2011)
Stumberger, G., Stumberger, B., Dolinar, D., Hamler, A.: Cross magnetization effect on inductances of linear synchronous reluctance motor under load conditions. IEEE Trans. Magn. 37(5) (2001)
Stumberger, G., Stumberger, B., Dolinar, D.: Analysis of cross–saturation effects in a linear synchronous reluctance motor performed by finite elements method and measurements. In: Proceedings of EPE-PEMC, Portoroz, Slovenia, pp. 1907–1912 (2006)
Stumberger, G., Stumberger, B., Dolinar, D.: Two–axis dynamic model of linear synchronous reluctance motor with magnetically nonlinear and anisotropic iron core. In: Proceedings of EUROCON’03, Ljubljana (Slovenia), pp. 225–229 (2003)
Damiano, A., Marongiu, I., Delpizzo, A., Perfetto, A.: Modeling improvement of a high anisotropy linear reluctance motor. In: Proceedings of Ist International Symposium on Linear Drives for Industry Applications, Ioujima-Nagasaki (Japan), pp. 179–182 (1995)
Jang, S.M., Park, J.H., Kwon, J.K., Choi, J.Y., Cho, H.W., Jang, W.B.: Design and experimental verification of linear synchronous reluctance motor. In: Proceedings of INTERMAG Asia Magnetics Conference, Nagoya (Japan), pp. 1427–1428 (2005)
Sanada, M., Mori, H., Morimoto, S., Takeda, Y.: Improvement of characteristics of linear SynRM with reluctance equalization. IEE Trans. 6, 804–805 (1998)
Sanada, M., Asano, M., Morimoto, S., Takeda, Y.: Mover design and performance analysis of linear synchronous reluctance motor. J. Electr. Eng. (Japan) 138(4), 61–69 (2002)
Sai, S., Sanada, M., Morimoto, S., Takeda, Y.: Fundamental investigation of LSynRM with magnetic suspension using armature winding for propulsion. In: Proceedings of National Convention Record, IEE (Japan), pp. 5–84 (2001)
Sai, S., Sanada, M., Morimoto, S., Takeda, Y.: Fundamental investigation of LSynRM with magnetic suspension using armature winding for propulsion. In: Proceedings of Power Conversion Conference, PCC-Osaka, vol. 1, pp. 48–53 (2002)
Sanada, M., Morimoto, S., Takeda, Y.: Speed control method of LSynRM with magnetic suspension using armature winding for propulsation. In: Proceedings of 4th International Symposium on Linear Drives for Industrial Applications, Birmingham (UK), pp. 109–112 (2003)
Ogawa, K.: 3-D numerical analysis of a short primary linear reluctance motor. In: Proceedings of 16th International Conference on Electrical Machines (2004)
Ogawa, K.: Static thrust of a short primary linear reluctance motor with simple secondary structure. In: Proceedings of 18th International Conference on Magnetically Levitated Systems and Linear Drives, Shanghai (China), pp. 905–910 (2004)
Ogawa, K., Higuchi, T.: D numerical analysis and test result of a short primary linear reluctance motor. J. Electr. Eng. (Japan) 125-D(8), 786–792 (2005)
Ogawa, K., Higuchi, T.: 3D numerical analysis and test results of a short-primary linear reluctance motor. J. Electr. Eng. (Japan) 161(1), 58–65 (2007)
Ueno, Y., Tahara, S., Ogawa, K.: 3D numerical analysis and test results of a short-primary linear reluctance motor. In: Proceedings of International Conference on Electrical Machines and Systems (2007)
Hamler, A., Trlep, M., Hribernik, B.: Optimal secondary segment shapes of linear reluctance motors using stochastic searching. IEEE Trans. Magn. 34(5), 3519–3521 (1998)
Mirzaei, M., Abdollahi, S.E., Vahedi, A.: Design optimization of reluctance synchronous linear machines for electromagnetic aircraft launch system. In: Proceedings of 14th Symposium on Electromagnetic Launch Technology, Victoria, BC, pp. 1–6 (2008)
Mirzaei, M., Abdollahi, S.E.: Design optimization of reluctance synchronous linear machines for electromagnetic aircraft launch system. IEEE Trans. Magn. 45(1), 389–395 (2009)
Yoshida, K., Matsumoto, H., Eguchi, M.: Optimal design of thrust force in vertical-type HTS bulk LRM. J. Physica C 839–847 (2005)
Stumberger, G., Stumberger, B., Dolinar, D.: Identification of linear synchronous reluctance motor parameters. In: Proceedings of Conference Record of Industry Applications Conference, vol. 1, Rome, pp. 7–14 (2000)
Stumberger, G., Stumberger, B., Dolinar, D.: Identification of linear synchronous reluctance motor parameters. IEEE Trans. Ind. Appl. 40(5), 1317–1324 (2004)
Dolinar, D., Stumberger, G., Grcar, B.: Input-output linearizing control of linear synchronous reluctance motor. In: Proceedings of PES, Marbella (Spain) (2000)
Dolinar, D., Stumberger, G., Hameyer, K., Grcar, B., Zagradisnik, I.: Exact tracking of linear synchronous reluctance servo drive. In: Proceedings of International Conference on Electrical Machines, vol. 1, pp. 227–234 (2000)
Dolinar, D., Stumberger, G.: High performance tracking of linear synchronous reluctance servo drive. In: Proceedings of 7th International Workshop on Advanced Motion Control, Slovenia, pp. 182–187 (2002)
Dolinar, D., Stumberger, G., Milanovic, M.: Position tracking control of saturated LSRM. ISA Trans. Instrum. Syst. Autom. Soc. 43, 527–538 (2004)
Dolinar, D., Stumberger, G., Milanovic, M.: Tracking improvement of LSRM at low-speed operation. Eur. Trans. Electr. Power 15, 257–270 (2005)
Dolinar, D., Stumberger, G.: Low speed tracking control improvement of linear synchronous reluctance machines. In: Proceedings of 25th IASTED International Conference on Modelling, Identification and Control, Canary Islands (Spain), pp. 97–102 (2006)
Ogawa, K.: Performance of a linear reluctance motor with novel structure. In: Proceedings of International Symposium on Linear Drives for Industry Applications, Birmingham (UK), pp. 57–60 (2003)
Ogawa, K., Matsuo, T.: A new construction of a short primary linear reluctance motor. In: Proceedings Japan-France congress on Mechatronics and Asia-Europe Congress on Mechatronics, pp. 53–540 (2003)
Ogawa, K.: Secondary geometry of a short primary linear reluctance motor. In: Proceedings of International Conference on Mechatronics and Information Technology, Jecheon (Korea), pp. 474–479 (2003)
Ogawa, K., Okada, H., Higuchi, T.: Thrust and lateral force in a linear reluctance motors with novel structure. J. Jpn. Soc. Appl. Electromagnet. Mech. 12(3), 232–238 (2004)
Ogawa, K.: Lateral force of a linear synchronous reluctance motor. In: Proceedings of International Symposium on Linear Drives for Industry Applications, pp. 84–87 (2005)
Ueno, Y., Suehiro, S., Tahara, S., Ogawa, K.: Flux density distribution of a linear synchronous reluctance motor with transverse flux structure. In: Proceedings of International Conference on Electrical Machines and Systems, DS1E2-03 (2006)
Ueno, Y., Tahara, S., Ogawa, K.: Thrust and lateral force of a linear synchronous reluctance motor using by 3-D boundary integral equation method. In: Proceedings of International Conference on Electrical Machines and Systems, Seoul (Korea), pp. 8–11 (2007)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Lenin, N.C., Sanjeevikumar, P., Iqbal, A., Mbohwa, C. (2018). Linear Synchronous Reluctance Motor—A Comprehensive Review. In: Konkani, A., Bera, R., Paul, S. (eds) Advances in Systems, Control and Automation. Lecture Notes in Electrical Engineering, vol 442. Springer, Singapore. https://doi.org/10.1007/978-981-10-4762-6_5
Download citation
DOI: https://doi.org/10.1007/978-981-10-4762-6_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-4761-9
Online ISBN: 978-981-10-4762-6
eBook Packages: EngineeringEngineering (R0)