Abstract
We consider an isotropic second gradient elastic two-dimensional solid. Besides, we relax the isotropic hypothesis and consider a D4 orthotropic material. The reason for this last choice is that such anisotropy is the most general for pantographic structures, which exhibit attracting mechanical properties. In this paper we analyze the role of the external body double force \(m^{ext}\) on the partial differential equations and we subsequently revisit some analytical solutions that have been considered in the literature for identification purposes. The revisited analytical solutions will be employed as well for identification purposes in a further contribution.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alibert, J.-J., Seppecher, P., dell’Isola, F.: Truss modular beams with deformation energy depending on higher displacement gradients. Math. Mech. Solids 8(1), 51–73 (2003)
Alibert, J.-J., Della, A.: Corte, Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof. Zeitschrift fur angewandte Mathematik und Physik 66(5), 2855–2870 (2015)
Altenbach, H., Eremeev, V.A., Morozov, N.F.: On equations of the linear theory of shells with surface stresses taken into account. Mech. Solids 45(3), 331–342 (2010)
Aminpour, H., Rizzi, N., Salerno, G.: A one-dimensional beam model for single-wall carbon nano tube column buckling. Civil-Comp Proc. 106 (2014)
Aminpour, H., Rizzi, N.: A one-dimensional continuum with microstructure for single-wall carbon nanotubes bifurcation analysis. Math. Mech. Solids 21(2), 168–181 (2016)
Aminpour, H., Rizzi, N.: On the continuum modelling of carbon nano tubes. Civil-Comp Proc. 108 (2015)
Aminpour, H., Rizzi, N.: On the modelling of carbon nano tubes as generalized continua. Adv. Struct. Mater. 42(1), 15–35 (2016)
Assante, D., C. Cesarano, C.: Simple semi-analytical expression of the lightning base current in the frequency-domain. J. Eng. Sci. Technol. Rev. 7(2), 1–6 (2014)
Atluri, S.N., Cazzani, A.: Rotations in computational solid mechanics. Arch. Comput. Methods Eng. 2(1), 49–138 (1995)
Auffray, N., Bouchet, R., Brechet, Y.: Derivation of anisotropic matrix for bi-dimensional strain-gradient elasticity behavior. Int. J. Solids Struct. 46(2), 440–454 (2009)
Auffray, N., Kolev, B., Petitot, M.: On anisotropic polynomial relations for the elasticity tensor. J. Elast. 115(1), 77–103 (2014)
Auffray, N., dell’Isola, F., Eremeyev, V.A., Madeo, A., Rosi, G.: Analytical continuum mechanics à la Hamilton-Piola least action principle for second gradient continua and capillary fluids. Math. Mech. Solids 20(4), 375–417 (2015)
Auffray, N., Dirrenberger, J., Rosi, G.: A complete description of bi-dimensional anisotropic strain-gradient elasticity, Submitted to International Journal of Solids and Structures (2017, in press). doi:10.1016/j.ijsolstr.2015.04.036
Baraldi, D., Reccia, E., Cazzani, A., Cecchi, A.: Comparative analysis of numerical discrete and finite element models: the case of in-plane loaded periodic brickwork. Compos.: Mech. Comput. Appl. 4(4), 319–344 (2013)
Bersani, A.M., Giorgio, I., Tomassetti, G.: Buckling of an elastic hemispherical shell with an obstacle. Contin. Mech. Thermodyn. 25(2–4), 443–467 (2013)
Bersani, A.M., Della Corte, A., Piccardo, G., Rizzi, N.L.: An explicit solution for the dynamics of a taut string of finite length carrying a traveling mass: the subsonic case. Zeitschrift für angewandte Mathematik und Physik 67(4), 108 (2016)
Bilotta, A., Turco, E.: A numerical study on the solution of the Cauchy problem in elasticity. Int. J. Solids Struct. 46(25–26), 4451–4477 (2009)
Bilotta, A., Formica, G., Turco, E.: Performance of a high-continuity finite element in three-dimensional elasticity. Int. J. Numer. Methods Biomed. Eng. 26(9), 1155–1175 (2010)
Carcaterra, A., Roveri, N.: Energy distribution in impulsively excited structures. Shock Vib. 19(5), 1143–1163 (2012)
Cazzani, A., Ruge, P.: Numerical aspects of coupling strongly frequency-dependent soil-foundation models with structural finite elements in the time-domain. Soil Dyn. Earthq. Eng. 37, 56–72 (2012)
Cecchi, A., Rizzi, N.L.: Heterogeneous elastic solids: a mixed homogenization-rigidification technique. Int. J. Solids Struct. 38(1), 29–36 (2001)
Cesarano, C., Assante, D.: A note on generalized Bessel functions. Int. J. Math. Models Methods Appl. Sci. 8(1), 38–42 (2014)
Cuomo, M., Contrafatto, L., Greco, L.: A variational model based on isogeometric interpolation for the analysis of cracked bodies. Int. J. Eng. Sci. 80, 173–188 (2014)
D’Annibale, F., Luongo, A.: A damage constitutive model for sliding friction coupled to wear. Contin. Mech. Thermodyn. 25(2–4), 503–522 (2013)
Del Vescovo, D., Giorgio, I.: Dynamic problems for metamaterials: Review of existing models and ideas for further research. Int. J. Eng. Sci. 80, 153–172 (2014)
Dell’Isola, F., Rotoli, G.: Validity of Laplace formula and dependence of surface tension on curvature in second gradient fluids. Mech. Res. Commun. 22(5), 485–490 (1995)
Dell’Isola, F., Seppecher, P.: The relationship between edge contact forces, double forces and interstitial working allowed by the principle of virtual power. Comptes Rendus de l’Academie de Sciences, Serie IIb: Mecanique, Physique, Chimie, Astronomie 321, 303–308 (1995)
Dell’Isola, F., Steigmann, D.: A two-dimensional gradient-elasticity theory for woven fabrics. J. Elast. 118(1), 113–125 (2015)
Dell’Isola, F., Gouin, H., Seppecher, P.: Radius and surface tension of microscopic bubbles by second gradient theory. Comptes Rendus de l’Academie de Sciences - Serie IIb: Mecanique, Physique, Chimie, Astronomie 320(6), 211–216 (1995)
Dell’Isola, F., Gouin, H., Rotoli, G.: Nucleation of spherical shell-like interfaces by second gradient theory: numerical simulations. Eur. J. Mech. B/Fluids 15(4), 545–568 (1996)
dell’Isola, F., Andreaus, U., Placidi, L.: At the origins and in the vanguard of peri-dynamics, non-local and higher gradient continuum mechanics. An underestimated and still topical contribution of Gabrio Piola. Mech. Math. Solids (MMS) 20, 887–928 (2015)
Dell’Isola, F., Seppecher, P., Della Corte, A.: The postulations à la D’Alembert and à la Cauchy for higher gradient continuum theories are equivalent: a review of existing results. Proc. R. Soc. Lond. A 471(2183), 20150415 (2015)
Dell’Isola, F., Della Corte, A., Giorgio, I., Scerrato, D.: Pantographic 2D sheets: Discussion of some numerical investigations and potential applications. Int. J. Non-Linear Mech. (2015)
Dell’Isola, F., Della Corte, A., Esposito, R., Russo, L.: Some cases of unrecognized transmission of scientific knowledge: from antiquity to gabrio piola’s peridynamics and generalized continuum theories. In: Generalized Continua as Models for Classical and Advanced Materials, pp. 77–128. Springer International Publishing (2016)
Dell’Isola, F., Steigmann, D., Della Corte, A.: Synthesis of fibrous complex structures: designing microstructure to deliver targeted macroscale response. Appl. Mech. Rev. 67(6), 21 p. (2016)
Dell’Isola, F., Della Corte, A. Greco, L., Luongo, A.: Plane bias extension test for a continuum with two inextensible families of fibers: a variational treatment with Lagrange Multipliers and a perturbation solution. Int. J. Solids Struct. (2017, in press). doi:10.1016/j.ijsolstr.2015.08.029
Dos Reis, F., Ganghoffer, J.F.: Construction of micropolar continua from the asymptotic homogenization of beam lattices. Comput. Struct. 112–113, 354–363 (2012)
Federico, S., Grillo, A., Wittum, G.: Considerations on incompressibility in linear elasticity. Nuovo Cimento C 32C, 81–87 (2009)
Federico, S., Grillo, A., Imatani, S.: The linear elasticity tensor of incompressible materials. Math. Mech. Solids (2014, in press). doi:10.1177/1081286514550576
Garusi, E., Tralli, A., Cazzani, A.: An unsymmetric stress formulation for reissner-mindlin plates: A simple and locking-free rectangular element. Int. J. Comput. Eng. Sci. 5(3), 589–618 (2004)
Goda, I., Assidi, M., Belouettar, S., Ganghoffer, J.F.: A micropolar anisotropic constitutive model of cancellous bone from discrete homogenization. J. Mech. Behav. Biomed. Mater. 16(1), 87–108 (2012)
Goda, I., Assidi, M., Ganghoffer, J.F.: A 3D elastic micropolar model of vertebral trabecular bone from lattice homogenization of the bone microstructure. Biomech. Model. Mechanobiol. 13(1), 53–83 (2014)
Greco, L., Cuomo, M.: Consistent tangent operator for an exact Kirchhoff rod model. Contin. Mech. Thermodyn. 1–7 (2014, in press)
Greco, L., Cuomo, M.: An implicit G1 multi patch B-spline interpolation for Kirchhoff-Love space rod. Comput. Methods Appl. Mech. Eng. 269, 173–197 (2014)
Indelicato, G., Albano, A.: Symmetry properties of the elastic energy of a woven fabric with bending and twisting resistance. J. Elast. 94(1), 33–54 (2009)
Luongo, A., D’Annibale, F.: Bifurcation analysis of damped visco-elastic planar beams under simultaneous gravitational and follower forces. Int. J. Mod. Phys. B 26(25), Article number 1246015 (2012)
Mindlin, R.D.: Micro-structure in Linear Elasticity, Department of Civil Engineering Columbia University New York 27, New York (1964)
Misra, A., Huang, S.: Micromechanical stress-displacement model for rough interfaces: effect of asperity contact orientation on closure and shear behavior. Int. J. Solids Struct. 49(1), 111–120 (2012)
Misra, A., Poorsolhjouy, P.: Micro-macro scale instability in 2D regular granular assemblies. Contin. Mech. Thermodyn. 27(1–2), 63–82 (2013)
Misra, A., Singh, V.: Nonlinear granular micromechanics model for multi-axial rate-dependent behavior. Int. J. Solids Struct. 51(13), 2272–2282 (2014)
Misra, A., Singh, V.: Thermomechanics-based nonlinear rate-dependent coupled damage-plasticity granular micromechanics model. Contin. Mech. Thermodyn. 27(4), 787–817 (2015)
Misra, A., Parthasarathy, R., Singh, V., Spencer, P.: Micro-poromechanics model of fluid-saturated chemically active fibrous media. ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik 95(2), 215–234 (2015)
Nguyen, C.H., Freda, A., Solari, G., Tubino, F.: Aeroelastic instability and wind-excited response of complex lighting poles and antenna masts. Eng. Struct. 85, 264–276 (2015)
Piccardo, G., Pagnini, L.C., Tubino, F.: Some research perspectives in galloping phenomena: critical conditions and post-critical behavior. Contin. Mech. Thermodyn. 27(1–2), 261–285 (2014)
Pideri, C., Pierre Seppecher, P.: A second gradient material resulting from the homogenization of an heterogeneous linear elastic medium. Contin. Mech. Thermodyn. 9(5), 241–257 (1997)
Placidi, L., Andreaus, U., Giorgio, I.: Identification of two-dimensional pantographic structure via a linear D4 orthotropic second gradient elastic model. J. Eng. Math. ISSN: 0022-0833 (2017, in press). doi:10.1007/s10665-016-9856-8
Placidi, L., El Dhaba, A.R.: Semi-inverse method á la Saint-Venant for two-dimensional linear isotropic homogeneous second gradient elasticity. Mech. Math. Solids (2017, in press). ISSN: 1081-2865
Placidi, L., Andreaus, U., Della Corte, A., Lekszycki, T.: Gedanken experiments for the determination of two-dimensional linear second gradient elasticity coefficients. Zeitschrift für angewandte Mathematik und Physik 66, 3699–3725 (2015)
Presta, F., Hendy, C.R., Turco, E.: Numerical validation of simplified theories for design rules of transversely stiffened plate girders. Struct. Eng. 86(21), 37–46 (2008)
Rahali, Y., Giorgio, I., Ganghoffer, J.F., dell’Isola, F.: Homogenization á la Piola produces second gradient continuum models for linear pantographic lattices. Int. J. Eng. Sci. 97, 148–172 (2015)
Rizzi, N.L., Varano, V.: On the postbuckling analysis of thin-walled frames. In: Proceedings of the 13th International Conference on Civil, Structural and Environmental Engineering Computing. 2011, 14p 13th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2011; Chania, Crete; Greece; 6 September 2011 through 9 September 2011; Code 89029
Rizzi, N.L., Varano, V.: The effects of warping on the postbuckling behaviour of thin-walled structures. Thin-Walled Struct. 49(9), 1091–1097 (2011)
Roveri, N., Carcaterra, A., Akay, A.: Vibration absorption using non-dissipative complex attachments with impacts and parametric stiffness. J. Acoust. Soc. Am. 126(5), 2306–2314 (2009)
Ruta, G.C., Varano, V., Pignataro, M., Rizzi, N.L.: A beam model for the flexural–torsional buckling of thin-walled members with some applications. Thin-Walled Struct. 46(7), 816–822 (2008)
Sansour, C., Skatulla, S.: A strain gradient generalized continuum approach for modelling elastic scale effects. Comput. Methods Appl. Mech. Eng. 198(15), 1401–1412 (2009)
Scerrato, D., Giorgio, I., Rizzi, N.L.: Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations. Zeitschrift fur Angewandte Mathematik und Physik, 67(3), Article number 53, 1 June (2016)
Scerrato, D. Zhurba Eremeeva, I.A., Lekszycki, T., Rizzi, N.L.: On the effect of shear stiffness on the plane deformation of linear second gradient pantographic sheets. ZAMM. Zeitschrift fur Angewandte Mathematik und Mechanik. (2016). doi:10.1002/zamm.201600066
Selvadurai, A.P.S.: Plane strain problems in second-order elasticity theory. Int. J. Non-Linear Mech. 8(6), 551–563 (1973)
Seppecher, P., Alibert J.-J., Dell’Isola, F.: Linear elastic trusses leading to continua with exotic mechanical interactions. J. Phys.: Conf. Seri. 319(1), 13 p. (2011)
Serpieri, R., Della Corte, A., Travascio, F., Rosati, L.: Variational theories of two-phase continuum poroelastic mixtures: a short survey. In: Generalized Continua as Models for Classical and Advanced Materials, pp. 377–394. Springer International Publishing (2016)
Solari, G., Pagnini, L.C., Piccardo, G.: A numerical algorithm for the aerodynamic identification of structures. J. Wind Eng. Ind. Aerodyn. 69–71, 719–730 (1997)
Solari, G., Pagnini, L.C., Piccardo, G.: A numerical algorithm for the aerodynamic identification of structures. J. Wind Eng. Ind. Aerodyn. 69–71, 719–730 (1997)
Steigmann, D.J.: Linear theory for the bending and extension of a thin, residually stressed, fiber-reinforced lamina. Int. J. Eng. Sci. 47(11–12), 1367–1378 (2009)
Steigmann, D.J., Dell’Isola, F.: Mechanical response of fabric sheets to three-dimensional bending, twisting, and stretching. Acta Mechanica Sinica/Lixue Xuebao 31(3), 373–382 (2015)
Terravecchia, S., Panzeca, T., Polizzotto, C.: Strain gradient elasticity within the symmetric BEM formulation. Fract. Struct. Integr. 29, 61–73 (2014)
Turco, E.: Identification of axial forces on statically indeterminate pin-jointed trusses by a nondestructive mechanical test. Open Civil Eng. J. 7(1), 50–57 (2013)
Walpole, L.J.: Fourth-rank tensors of the thirty-two crystal classes: multiplication tables. Proc. R. Soc. Lond. Ser. A 391, 149–179 (1984)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Placidi, L., Barchiesi, E., Battista, A. (2017). An Inverse Method to Get Further Analytical Solutions for a Class of Metamaterials Aimed to Validate Numerical Integrations. In: dell'Isola, F., Sofonea, M., Steigmann, D. (eds) Mathematical Modelling in Solid Mechanics. Advanced Structured Materials, vol 69. Springer, Singapore. https://doi.org/10.1007/978-981-10-3764-1_13
Download citation
DOI: https://doi.org/10.1007/978-981-10-3764-1_13
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-3763-4
Online ISBN: 978-981-10-3764-1
eBook Packages: EngineeringEngineering (R0)