Abstract
Variation in geometry of P-GMA weld as a function of pulse parameters has been discussed in order to understand the control of welding process to produce desired weld geometry of required chemistry for an acceptable weld quality. The mechanism of the control of weld geometry governed by its basic aspects as penetration , width, reinforcement, form factor, toe angle and area along with the base metal fusion and dilution has been explained as a function of pulse parameters especially with respect to ϕ and energy input . The matter has been discussed considering the cases of bead on plate weld deposition and weld cladding in flat position using solid filler wire. The cases of bead on plate weld deposition have also been considered for the flux cored filler wire and also for the out of position deposition. The geometrical aspect of weld joint as a function of pulse parameters has been addressed for flat and positional butt welding of ferrous and non ferrous metals.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cho, M.H., Lim, Y.C., Farson, D.F.: Simulation of weld pool dynamics in the stationary pulsed gas metal arc welding process and final weld shape. Weld. J. 85(12), 271s–283s (2006)
Ghosh, P.K., Gupta, P.C., Somani, R.: Influence of pulse parameters on bead geometry and HAZ during bead on plate deposition by MIG welding process. Z. Metallkde 82(10), 756–762 (1991)
Goyal, V.K., Ghosh, P.K., Saini, J.S.: Analytical studies on thermal behaviour and geometry of weld pool in pulsed current gas metal arc welding. J. of Mater. Processing Tech. 209, 1318–1336 (2009)
Dillenbeck, V.R., Castagno, L.: The Effects of Various Shielding Gases and Associated Mixtures in GMA Welding of Mild Steel. Weld. J. 66(9), 45–49 (1987)
Goyal, V.K., Effect of thermal and solidification behaviour on characteristics of pulsed current GMA weld, PhD thesis, Indian Institute of Technology Roorkee, India (2007)
Goyal, V.K., Ghosh, P.K., Saini, J.S.: Met. Mater. Trans. A 38A(8), 1794–1805 (2007)
Shackleton, D.N., Lucas, W.: Shielding gas mixtures for high quality mechanized GMA welding of Q&T steels. Weld. J. 53(12), 537s–547s (1974)
Ghosh, P.K., Dorn, L., Issler, L.: Fatigue crack growth behaviour of pulsed current MIG weld of Al-Zn-Mg alloy. Int. J. Joining Mater. 6(4), 163–168 (1994)
Needham, J.C.: Pulse controlled consumable electrode welding arcs. Br. Weld. J. 12(4), 191–197 (1965)
Ghosh, P.K., Rai, B.K.: Characteristics of pulsed current bead on plate deposit in flux cored GMAW process. ISIJ Int. 36(8), 1036–1045 (1996)
Ghosh, P.K.: An analysis of weld characteristics as a function of pulse current MIG welding parameters. Int. J. Joining Mater. 8(4), 157–161 (1996)
Amin, M.: Pulse current parameters for arc stability and controlled metal transfer in arc welding. Metal Constr. 15(5), 272–287 (1983)
Ghosh, P.K., Rai, B.K.: Correlations of pulse parameters and bead characteristics in pulsed current flux cored GMAW process. Ind. Weld. J. 31(4), 30–39 (1998)
French, I.E., Bosworth, M.R.: A comparison of pulsed and conventional welding with basic flux cored and metal cored welding wires. Weld. J. 74(6), 197s–205s (1995)
Widgery, D.J.: Flux cored wire: An update welding and met. Fabrication, April, 188–124 (1988)
Liu, H.Y., Li, Z.X., Li, H., Shi, Y.W.: Study on metal transfer modes and welding spatter characteristics of self-shielded fluxcored wire. Sci. Technol. Weld. Joining 13(8), 777–780 (2008)
Ghosh, P.K., Gupta, S.R., Randhawa, H.S.: Characteristics and criticality of pulsed current vertical up GMA weld in steel. Int. J. Join. Mater. 11(4), 99–110 (1999)
Ghosh, P.K., Gupta, S.R., Randhawa, H.S.: Analytical studies on characteristics of vertical up bead on plate weld deposition using pulsed current GMAW. Int. J. for the Joining of materials 12(3), 76–85 (2000)
Ghosh, P.K.: The influence of dilution and heat input on the characteristics of SAW stainless steel cladding on mild steel. Int. J. Joining Mater. 4(3), 90–99 (1992)
Ghosh, P.K., Gupta, P.C., Breazu, M., Gupta, R.K.: The influence of some welding parameters on the properties of stain-less steel strip cladding deposited by a submerged arc process. Trans. JIM 28(7), 579–584 (1987)
Waszink, J.H., Piena, M.J.: Experimental investigation of drop detachment and drop velocity in GMAW. Welding Journal 65(11), 289s–298s (1986)
Park, H.J., Kim, D.C., Kang, M.J., Rhee, S.: Optimization of the wire feed rate during pulse MIG welding of Al sheets. J. Achievements Mater. Manufact. Eng. 27, 1 March 83–86 (2008)
Gray, T.G.F., Spence, J.: Rational welding design, Butterworths, London, Revised Ed., (1983)
Ghosh, P.K., Gupta, P.C., Jain, N.K.: Effect of pulse frequency on the weld seam properties in pulsed arc MIG welding of Al–Zn–Mg alloy. Aluminium 64(9), 933–935 (1988)
Ghosh, P.K., Gupta, S.R., Gupta, P.C., Rathi, R.: Influence of pulsed current welding on the microstructure and porosity content of Al–Zn–Mg alloy weldment. Pract. Met. 27, 613–626 (1990)
Ghosh, P.K., Gupta, S.R., Gupta, P.C., Rathi, R.: Pulsed MIG welding of Al–Zn–Mg alloy. Mater. Trans. JIM 31(8), 723–729 (1990)
Hussain, H.M., Ghosh, P.K., Gupta, P.C., Potluri, N.B.: Weld characteristics of multipass pulse current MIG welded Al–Zn–Mg alloy. Int. J. Join. Mater. 9(2), 74–79 (1997)
Hussain, H.M., Ghosh, P.K., Gupta, P.C., Potluri, N.B.: Properties of pulsed current multipass GMA welded Al–Zn–Mg alloy. Weld. J. 75(7), 210s–215s (1996)
Bagryanskii, K.V., Royanov, V.A.: Svar. Proiz. 10, 23–24 (1968)
Smati, Z.: Automatic pulsed MIG welding. Met. Constr. 18(1), 38R–44R (1980)
Ghosh, P.K., Kulkarni, S.G., Kumar, M., Dhiman, H.K.: Pulsed current GMAW for superior weld quality of austenitic stainless steel sheet. ISIJ Int. 47(1), 138–145 (2007)
Ghosh, P.K., Devakumaran, K., Goyal, V.K., Kulkarni, S.G., Ghosh, Aritra K.: Procd. 14th ISME Int. Conf. Mechanical Engineering in knowledge and age, New Delhi, India, December, Delhi college of engineering, Paper 338 (2005)
Ghosh, P.K., Hussain, H.M.: Morphology and porosity content of multipass pulsed current GMA weld of Al–Zn–Mg alloy. Int. J. Join. Mater. 14(1/2), 16–27 (2002)
Matthews, J.R., Lassaline, E.E., Porter, J.F., Leewis, K.G.: Evaluating frequency modulated GMA welding for HY 80 steel. Weld. J. 71(9), 49–53 (1992)
Alum, C.J.: MIG welding—Time for a reassessment, Metal Constr. 15(6), 347–353 (1983). [2.12128.]
Craig, E.: A unique mode of GMAW transfer. Weld. J. 66(9), 51–55 (1987)
Ghosh, P.K., Randhawa, H.S., Gupta, S.R.: Met. and Mater. Trans. A 31A(9), 2247–2259 (2000)
Ghosh, P.K., Gupta, S.R., Randhawa, H.S.: Analytical studies on characteristics of vertical up bead on plate weld deposition using pulsed current GMAW. Int. J. Joining Mater. 12(3), 76–85 (2000)
Randhawa, H.S., Ghosh, P.K., Gupta, S.R.: Geometric characteristics of pulsed current positional GMA weld. ISIJ Int. 38(4), 276–284 (1998)
Randhawa, H.S., Ghosh, P.K., Gupta, S.R.: Some basic aspects of geometrical characteristics of pulsed current vertical up GMA weld. ISIJ Int. 40(1), 71–76 (2000)
Allum, C.J., Quintino, L.: Control of fusion characteristics in pulsed current MIG welding, Part-II, Simple model of fusion characteristics. Metal Constr. 17(5), 314R–317R (1985)
Cornu, Jean: Advanced welding system, IFS Publication Ltd. UK, 2, 127–165 (1988)
Maruo, H., Hirata, Y.B.: Study of pulsed MIG welding, IIW Doc. SG 212-585-84, Welding Department, Osaka University, Japan, July (1984)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Ghosh, P.K. (2017). Geometry of Pulse Current GMA Weld. In: Pulse Current Gas Metal Arc Welding. Materials Forming, Machining and Tribology. Springer, Singapore. https://doi.org/10.1007/978-981-10-3557-9_5
Download citation
DOI: https://doi.org/10.1007/978-981-10-3557-9_5
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-3556-2
Online ISBN: 978-981-10-3557-9
eBook Packages: EngineeringEngineering (R0)