Abstract
This chapter is devoted to the exploitation of high order sliding mode for fault detection of inter-turn short-circuit in induction machine. For this purpose, healthy and faulty induction machine models are firstly established for different operating conditions during open loop control. The faulty model show the impact of inter-turn short-circuit on induction machine variables. Secondly, a high order sliding mode is synthesized to design decoupled current controller for induction machine and a closed loop induction machine dynamics are analyzed. The fault detection algorithm is combined actual induction machine behavior given by faulty model including fault occurrence and the behavior given by high order sliding mode observer to provide sensitive residuals, which exploited such fault indicators. This theoretical research prove that high order sliding mode approach have good capabilities to ensure both decoupled current control and inter-turn short-circuit fault detection.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahamed, S. K., Sarkar, A., Mitra, M., & Sengupta, S. (2014). Novel approach for detection of inter-turn short circuit of induction motor’s stator winding through envelope analysis. In International Conference on Electrical and Computer Engineering (ICECE) (pp. 457–460). IEEE.
Alwi, H., & Edwards, C. (2014). Robust fault reconstruction for linear parameter varying systems using sliding mode observers. International Journal of Robust and Nonlinear Control, 24(14), 1947–1968.
Ashari, A. E. E., Nikoukhah, R., & Campbell, S. L. (2012). Active robust fault detection in closed-loop systems: Quadratic optimization approach. IEEE Transactions on Automatic Control, 57(10), 2532–2544.
Aurora, C., & Ferrara, A. (2007). A sliding mode observer for sensorless induction motor speed regulation. International Journal of Systems Science, 38(11), 913–929.
Benderradji, H., Benamor, A., Chrifi-Alaoui, L., Bussy, P., & Makouf, A. (2012). Second order sliding mode induction motor control with a new Lyapunov approach. In 9th International Multi-Conference on Systems, Signals and Devices (SSD) (pp. 1–6). IEEE.
Bhavsar, R. C., Patel, R., Bhalja, B., et al. (2014). Condition monitoring of induction motor using artificial neural network. In Annual International Conference on Emerging Research Areas: Magnetics, Machines and Drives (AICERA/iCMMD) (pp. 1–6). IEEE.
Cao, W., Mecrow, B. C., Atkinson, G. J., Bennett, J. W., & Atkinson, D. J. (2012). Overview of electric motor technologies used for more electric aircraft (MEA). IEEE Transactions on Industrial Electronics, 59(9), 3523–3531.
Comanescu, M. (2009). An induction-motor speed estimator based on integral sliding-mode current control. IEEE Transactions on Industrial Electronics, 56(9), 3414–3423.
Comanescu, M. (2010). Cascaded EMF and speed sliding mode observer for the nonsalient PMSM. In IECON 2010-36th Annual Conference on IEEE Industrial Electronics Society (pp. 792–797). IEEE.
Comanescu, M., Xu, L., & Batzel, T. D. (2008). Decoupled current control of sensorless induction-motor drives by integral sliding mode. IEEE Transactions on Industrial Electronics, 55(11), 3836–3845.
Devi, N. R., Sarma, D., & Rao, P. (2014). Detection and identification of stator inter-turn faults in three-phase induction motor in presence of supply unbalance condition. In IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) (pp. 1–4). IEEE.
Drif, M., & Cardoso, A. J. M. (2014). Stator fault diagnostics in squirrel cage three-phase induction motor drives using the instantaneous active and reactive power signature analyses. IEEE Transactions on Industrial Informatics, 10(2), 1348–1360.
Edwards, C., Spurgeon, S. K., & Patton, R. J. (2000). Sliding mode observers for fault detection and isolation. Automatica, 36(4), 541–553.
Edwards, C., Alwi, H., & Menon, P. P. (2013). Applications of sliding observers for FDI in aerospace systems. Advances in Sliding Mode Control (pp. 341–360). New York: Springer.
Eker, İ. (2012). Second-order sliding mode control with PI sliding surface and experimental application to an electromechanical plant. Arabian Journal for Science and Engineering, 37(7), 1969–1986.
Ferrara, A., & Rubagotti, M. (2009). A sub-optimal second order sliding mode controller for systems with saturating actuators. IEEE Transactions on Automatic Control, 54(5), 1082–1087.
Filippetti, F., Franceschini, G., Tassoni, C., & Vas, P. (2000). Recent developments of induction motor drives fault diagnosis using AI techniques. IEEE Transactions on Industrial Electronics, 47(5), 994–1004.
Frosini, L., Borin, A., Girometta, L., & Venchi, G. (2012). A novel approach to detect short circuits in low voltage induction motor by stray flux measurement. In XXth International Conference on Electrical Machines (ICEM) (pp. 1538–1544). IEEE.
Ghazal, M., & Poshtan, J. (2011). Robust stator winding fault detection in induction motors. In 2nd Power Electronics, Drive Systems and Technologies Conference (PEDSTC) (pp. 163–168). IEEE.
Guezmil, A., Berriri, H., Sakly, A., & Mimouni, M. (2014). Backstepping control for induction machine with high order sliding mode observer and unknown inputs observer: A comparative study. In International Conference on Electrical Sciences and Technologies in Maghreb (CISTEM) (pp. 1–8). IEEE.
Gyftakis, K. N., & Kappatou, J. C. (2014). The zero-sequence current as a generalized diagnostic mean in \(\delta \)-connected three-phase induction motors. IEEE Transactions on Energy Conversion, 29(1), 138–148.
Hermans, F. J., & Zarrop, M. (1996). Sliding mode observers for robust sensor monitoring. In Proceedings of the 13th IFAC World Congress (pp. 211–216).
Jurkovic, S., Rahman, K. M., Morgante, J. C., & Savagian, P. J. (2015). Induction machine design and analysis for general motors e-assist electrification technology. IEEE Transactions on Industry Applications, 51(1), 631–639.
Kaikaa, M. Y., & Hadjami, M. (2014). Effects of the simultaneous presence of static eccentricity and broken rotor bars on the stator current of induction machine. IEEE Transactions on Industrial Electronics, 61(5), 2452–2463.
Kommuri, S. K., Rath, J. J., Veluvolu, K. C., & Defoort, M. (2014). An induction motor sensor fault detection and isolation based on higher order sliding mode decoupled current controller. In European Control Conference (ECC) (pp. 2945–2950). IEEE.
Kommuri, S. K., Rath, J. J., Veluvolu, K. C., Defoort, M., & Soh, Y. C. (2015). Decoupled current control and sensor fault detection with second-order sliding mode for induction motor. IET Control Theory and Applications, 9(4), 608–617.
Levant, A. (1993). Sliding order and sliding accuracy in sliding mode control. International Journal of Control, 58(6), 1247–1263.
Liu, H., Huang, J., Cheng, M., Hou, Z., & Zhao, L. (2014). Stator inter-turn fault detection for the converter-fed induction motor based on the adjacent-current phase-shift. In 17th International Conference on Electrical Machines and Systems (ICEMS) (pp. 981–987). IEEE.
Lu, Q., Breikin, T., & Wang, H. (2011). Modelling and fault diagnosis of stator inter-turn short circuit in doubly fed induction generators. In Proceedings of the IFAC. Milan, Italy.
Mekki, H., Benzineb, O., Boukhetala, D., Tadjine, M., & Benbouzid, M. (2015). Sliding mode based fault detection, reconstruction and fault tolerant control scheme for motor systems. ISA Transactions.
Melero, M., Cabanas, M., Rojas, C., Orcajo, G., Cano, J., & Solares, J. (2003). Study of an induction motor working under stator winding inter-turn short circuit condition. In 4th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, 2003. SDEMPED (pp. 52–57). IEEE.
Moreno, J., Osorio, M., et al. (2008). A Lyapunov approach to second-order sliding mode controllers and observers. In 47th IEEE Conference on Decision and Control, 2008. CDC (pp. 2856–2861). IEEE.
Nandi, S., Toliyat, H., Li, X., et al. (2005). Condition monitoring and fault diagnosis of electrical motors—A review. IEEE Transactions on Energy Conversion, 20(4), 719–729.
Nohra, C. (2013). Online stator and rotor fault diagnosis in induction machines by \(H_\infty \) observer and sliding mode estimator. In 25th Chinese Control and Decision Conference (CCDC) (pp. 3269–3274). IEEE.
Pilloni, A., Pisano, A., Riera-Guasp, M., Puche-Panadero, R., & Pineda-Sanchez, M. (2013). Fault detection in induction motors. AC electric motors control: Advanced design techniques and applications (pp. 275–309).
Riera-Guasp, M., Antonino-Daviu, J., Capolino, G.-A., et al. (2015). Advances in electrical machine, power electronic, and drive condition monitoring and fault detection: State of the art. IEEE Transactions on Industrial Electronics, 62(3), 1746–1759.
Sebastián, R., & Peña-Alzola, R. (2015). Control and simulation of a flywheel energy storage for a wind diesel power system. International Journal of Electrical Power and Energy Systems, 64, 1049–1056.
Sellami, T., Berriri, H., Jelassi, S., & Mimouni, M. F. (2013). Sliding mode observer-based fault-detection of inter-turn short-circuit in induction motor. In 14th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) (pp. 524–529). IEEE.
Seshadrinath, J., Singh, B., & Panigrahi, B. (2014a). Vibration analysis based interturn fault diagnosis in induction machines. IEEE Transactions on Industrial Informatics, 10(1), 340–350.
Seshadrinath, J., Singh, B., & Panigrahi, B. K. (2014b). Incipient interturn fault diagnosis in induction machines using an analytic wavelet-based optimized Bayesian inference. IEEE Transactions on Neural Networks and Learning Systems, 25(5), 990–1001.
Shtessel, Y., Edwards, C., Fridman, L., & Levant, A. (2014a). Second-order sliding mode controllers and differentiators. Sliding mode control and observation (pp. 143–182). New York: Springer.
Shtessel, Y., Edwards, C., Fridman, L., & Levant, A. (2014b). Sliding mode control and observation. New York: Springer.
Siddique, A., Yadava, G., & Singh, B. (2005). A review of stator fault monitoring techniques of induction motors. IEEE Transactions on Energy Conversion, 20(1), 106–114.
Sridharan, S., & Krein, P. T. (2014). Induction motor drive design for traction application based on drive-cycle energy minimization. In Twenty-Ninth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) (pp. 1517–1521). IEEE.
Toumi, D., Boucherit, M., & Tadjine, M. (2012). Observer-based fault diagnosis and field oriented fault tolerant control of induction motor with stator inter-turn fault. Archives of Electrical Engineering, 61(2), 165–188.
Verma, A., Sarangi, S., & Kolekar, M. (2014). Stator winding fault prediction of induction motors using multiscale entropy and grey fuzzy optimization methods. Computers and Electrical Engineering, 40(7), 2246–2258.
Zhao, L., Huang, J., Liu, H., Li, B., & Kong, W. (2014). Second-order sliding-mode observer with online parameter identification for sensorless induction motor drives. IEEE Transactions on Industrial Electronics, 61(10), 5280–5289.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Guezmil, A., Berriri, H., Sakly, A., Mimouni, M.F. (2017). An Enhanced High Order Sliding Mode based Method for Detecting Inter-Turn Short-Circuit Fault in Induction Machine with Decoupled Current Control. In: Derbel, N., Ghommam, J., Zhu, Q. (eds) Applications of Sliding Mode Control. Studies in Systems, Decision and Control, vol 79. Springer, Singapore. https://doi.org/10.1007/978-981-10-2374-3_15
Download citation
DOI: https://doi.org/10.1007/978-981-10-2374-3_15
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-2373-6
Online ISBN: 978-981-10-2374-3
eBook Packages: EngineeringEngineering (R0)