Abstract
In this chapter, the experimental investigation is conducted on the research prototype of the tubular linear machine with dual Halbach array to verify the analytical magnetic field model , force output model, and armature reaction field model proposed in Chaps. 2, 3, and 4, respectively. The experimental results also facilitate the visualization of the magnetic field distribution, the force output variation, and armature reaction field analysis of the linear machine. As shown in Fig. 6.1, the experimental investigation of the tubular linear machine consists of three major tasks: measurement of the magnetic field distribution, the force output variation, and the armature reaction change. This chapter begins with description of research prototype , magnetic field measurement procedure of the tubular linear machine, and the corresponding data processing and analysis. The force and the armature reaction measurements are carried out on the machine and compared with the theoretical models . The experimental results confirm the proposed analytical model for further control study of the linear machine.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Omura M, Shimono T, Fujimoto Y (2015) Development of semicircular tubular core-less linear motor and its motion control. IEEJ Trans Ind Appl 135(3):246–257
Cheema MAM, Fletcher J, Xiao D et al (2015) A direct thrust control scheme for linear permanent magnet synchronous motor based on on-line duty ratio control, vol 31, no. 6, pp 4416–4428
Wang T, Yan L, Jiao Z (2015) Design of a novel integrated position sensor based on Hall effects for linear oscillating actuator. Rev Sci Instrum 86(7):075001
Tomczuk B, Sobol M (2005) A field-network model of a linear oscillating motor and its dynamics characteristics. IEEE Trans Magn 41(8):2362–2367
Xu F, Hu J, Zou J et al (2014) Comparative investigation of permanent magnet linear oscillatory actuators used in orbital friction vibration machine. Int J Appl Electromagn Mech 45(1–4):581–588
Clark RE, Smith DS, Mellor PH et al (1995) Design optimisation of moving-magnet actuators for reciprocating electro-mechanical systems. IEEE Trans Magn 31(6):3746–3748
Chen X, Zhu ZQ (2011) Analytical determination of optimal split ratio of E-core permanent magnet linear oscillating actuators. IEEE Trans Ind Appl 47(1):25–33
Chen X, Zhu ZQ, Howe D (2009) Modeling and analysis of a tubular oscillating permanent-magnet actuator. IEEE Trans Ind Appl 45(6):1961–1970
Wheeler PW, Clare JC, Trentin A et al (2013) An overview of the more electrical aircraft. Proc Inst Mech Eng Part G: J Aerosp Eng 227(4):578–585
Wang L, Zhou W, Gan Z (2011) Performance testing of linear compressors with RC approach. In: Advances in cryogenic engineering: transactions of the cryogenic engineering conference-CEC, vol 1434, no. 1, Spokane, Washington, USA, pp 1624–1631, 13–17 June 2011
Macione J, Nesbitt S, Pandit V et al (2012) Design and analysis of a novel mechanical loading machine for dynamic in vivo axial loading. Rev Sci Instrum 83(2):025113
Friedman SJ, Barwick B, Batelaan H (2005) Focused-laser interferometric position sensor. Rev Sci Instrum. 76(12):123106
Miklos A, Szabo Z (2015) Simulation and experimental validation of the dynamical model of a dual-rotor vibrotactor. J Sound Vib 334:98–107
Bajic JS, Stupar DZ, Dakic BM et al (2014) An absolute rotary position sensor based on cylindrical coordinate color space transformation. Sens Actuators A: Phys 213:27–34
Cheng CH, Hung SC, Liu WF (2014) A motor’s rotational angle sensor based on fiber Bragg grating. Microw Opt Technol Lett 56(6):1449–1452
Teo TJ, Zhu H, Pang CK (2014) Modeling of a two degrees-of-freedom moving magnet linear motor for magnetically levitated positioners. IEEE Trans Magn 50(12):1–12
Liang H, Jiao Z, Yan L et al (2014) Design and analysis of a tubular linear oscillating motor for directly-driven EHA pump. Sens Actuators A: Phys 210:107–118
Leidhold R, Mutschler P (2007) Speed sensorless control of a long-stator linear synchronous motor arranged in multiple segments. IEEE Trans Industr Electron 54(6):3246–3254
Cupertino F, Giangrande P, Pellegrino G et al (2011) End effects in linear tubular motors and compensated position sensorless control based on pulsating voltage injection. IEEE Trans Industr Electron 58(2):494–502
Cheok AD, Ertugrul N (2000) High robustness and reliability of fuzzy logic based position estimation for sensorless switched reluctance motor drives. IEEE Trans Power Electron 15(2):319–334
Foo G, Rahman MF (2010) Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection. IEEE Trans Industr Electron 57(4):1270–1278
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Yan, L., Zhang, L., Peng, J., Zhang, L., Jiao, Z. (2017). Research Prototype and Experiments. In: Electromagnetic Linear Machines with Dual Halbach Array. Springer, Singapore. https://doi.org/10.1007/978-981-10-2309-5_6
Download citation
DOI: https://doi.org/10.1007/978-981-10-2309-5_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-2307-1
Online ISBN: 978-981-10-2309-5
eBook Packages: EngineeringEngineering (R0)