Abstract
This chapter starts with a brief overview of the historical development of aerospace aluminium alloys. This is followed by a listing of a range of current alloys with a description of the alloy classification system and the wide range of tempers in which Al alloys are used. A description is given of the alloying and precipitation hardening behaviour, which is the principal strengthening mechanism for Al alloys. A survey of the mechanical properties, fatigue behaviour and corrosion resistance of Al alloys is followed by a listing of some of the typical aerospace applications of Al alloys. The Indian scenario with respect to production of primary aluminium and some aerospace alloys, and the Type Certification process of Al alloys for aerospace applications are described. Finally there is a critical review of some of the gaps in existing aerospace Al alloy technologies.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Campbell FC (2006) Manufacturing technology for aerospace structural materials. Butterworth-Heinemann Publication, An Imprint of Elsevier Publications, New York, NY, USA
Davis JR (1994) Aluminum and aluminum alloys. ASM Speciality Handbook, ASM International, Materials Park, OH, USA
Polmear IJ (2004) Aluminium alloys—a century of age hardening. In: Nie JF, Morton AJ, Muddle BC (eds) Materials forum, vol 28. Institute of Materials Engineering Australasia Limited, Melbourne, Australia
Starke EA Jr, Staley JT (1996) Application of modern aluminum alloys to aircraft. Prog Aerospace Sci 32:131–172
Vasudevan AK, Doherty RD (1989) Aluminum alloys—contemporary research and applications. Academic Press, Inc, Cambridge, MA, USA
Polmear IJ (2006) Light alloys. Butterworth-Heinemann Publication, An Imprint of Elsevier Publications, New York, NY, USA
Wanhill RJH (1994) Fatigue and fracture properties of aerospace aluminium alloys. In: Carpinteri (ed) Handbook of fatigue crack propagation in metallic structures. Elsevier Science Publishers, Amsterdam, The Netherlands, pp 247–279
Wanhill RJH (1994) Flight simulation fatigue crack growth testing of aluminium alloys. Specific issues and guidelines. Int J Fatigue 16(2):99–110
Hatch John E (1988) Aluminum—properties and physical metallurgy. American Society for Metals, Metals Park, OH, USA
NTIS (1973) Plane strain fracture toughness (KIC) data hand book for metals, USA
Wanhill RJH (1994a) Fatigue and fracture of aerospace aluminium alloys: a short course. National Aerospace Laboratory NLR Technical Publication 94034, Amsterdam, The Netherlands
Wanhill RJH, Byrnes RT, Smith CL (2011) Stress Corrosion cracking (SCC) in aerospace vehicles. In: Raja VS, Shoji T (eds) Stress corrosion cracking. Theory and practice. Woodhead Publishing Limited, Cambridge, UK, pp 608–650
Eswara Prasad N, Gokhale Amol A, Wanhill RJH (eds) (2014) Aluminum–Lithium alloys: processing, properties and applications. Elsevier Inc., Oxford, UK
Some Useful Data Handbooks
Metallic materials properties development and standardization (MMPDS), Battelle Memorial Inst. Columbus, OH, USA, 2003
Kaufman JG (1999) Properties of aluminum alloys—tensile, creep and fatigue data at high and low temperatures. ASM International, Materials Park, OH, USA
Aerospace structural metals handbook, mechanical properties data center. A DOD Materials Information Centre, Battelle Columbus Laboratories, OH, USA, vol 3, 198
Gupta Balram et al (1996) Aerospace materials, vol 3. S. Chand & Co Ltd., India
Source book on selection and fabrication of aluminum alloys. American Society for Metals, Metals Park, OH, USA, 1978
Davis JR (1994) Aluminum and aluminum alloys. ASM Speciality Handbook, ASM International, Materials Park, OH, USA
Acknowledgments
The authors wish to thank several colleagues from DRDO whose inputs have become part of this chapter. They particularly would like to thank Dr. Amol A. Gokhale, Dr. Ashim K. Mukhopadyay, Mr. V.P. Deep Kumar, Dr. Shirish Kale and Mr. Sanjay Chawla. Two of the authors (PRB and NEP) are thankful to CEMILAC and DRDO for support and funding.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Rambabu, P., Eswara Prasad, N., Kutumbarao, V.V., Wanhill, R.J.H. (2017). Aluminium Alloys for Aerospace Applications. In: Prasad, N., Wanhill, R. (eds) Aerospace Materials and Material Technologies . Indian Institute of Metals Series. Springer, Singapore. https://doi.org/10.1007/978-981-10-2134-3_2
Download citation
DOI: https://doi.org/10.1007/978-981-10-2134-3_2
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-2133-6
Online ISBN: 978-981-10-2134-3
eBook Packages: EngineeringEngineering (R0)