Advertisement

Some Solutions of Stationary Problems Based on 3D Theory

  • Alexander Ya. GrigorenkoEmail author
  • Wolfgang H. Müller
  • Yaroslav M. Grigorenko
  • Georgii G. Vlaikov
Chapter
  • 179 Downloads
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

In the present chapter models of three-dimensional theory of elasticity are used in order to study the stationary deformation of hollow and solid anisotropic inhomogeneous cylinders of finite length. Solutions for the stress–strain state and natural vibrations of hollow inhomogeneous finite-length cylinders are presented, which were obtained by making use of spline-collocation and discrete-orthogonalization methods. The influence of geometrical and mechanical parameters, of the boundary conditions, of the loading character on the distributions of stress and displacement fields, and of the dynamical characteristics in such cylinders are analyzed. In some cases the results obtained by three-dimensional and shell theory are compared. When solving dynamical problems for orthotropic hollow cylinders with different boundary conditions at the ends the method of straight-line methods in combination with the discrete-orthogonalization method was applied as well. Computations for solid anisotropic cylinders of finite length with different boundary conditions were carried out by using the semi-analytical finite element method. In the case of free ends the results of the calculations for the natural frequencies were compared with those determined experimentally. The results of calculations of the mechanical behavior of anisotropic inhomogeneous circular cylinders demonstrate the efficiency of the discrete-continuous approaches proposed in this monograph for solving shell problems when using three-dimensional models of elasticity theory.

Keywords

Anisotropic Cylinders Discrete-orthogonalization Method Finite Length Cylinder Straight-line Method Inhomogeneous Cylinder 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Banerjee PK, Henry DP (1992) Elastic analysis of three-dimensional solids with fiber inclusions by BEM. Int J Solids Struct 29(20):2423–2440CrossRefzbMATHGoogle Scholar
  2. 2.
    Collin F, Caillerie D, Chambon R (2009) Analytical solutions for the thick-walled cylinder problem modeled with an isotropic elastic second gradient constitutive equation. Int J Solids Struct 46(22–23):3927–3937CrossRefzbMATHGoogle Scholar
  3. 3.
    Gal D, Dvorkin J (2009) Stresses in anisotropic cylinders. Mech Res Commun 22:109–113Google Scholar
  4. 4.
    Grigorenko AY (1997) Numerical solution of problems of free axisymmetric oscillations of a hollow orthotropic cylinder under various boundary conditions at its end faces. Int Appl Mech 33(5):388–393CrossRefGoogle Scholar
  5. 5.
    Grigorenko AY, Kryukov NN (1997) Use of spline approximation to study displacement and stress fields in cylinders with different boundary conditions on the ends. Int Appl Mech 33(12):958–965MathSciNetCrossRefzbMATHGoogle Scholar
  6. 6.
    Grigorenko AY, Dyyak II, Makar VM (2001) Influence of anisotropy on the response characteristics of finite cylinders under free vibrations. Int Appl Mech 37(5), pp 628–637Google Scholar
  7. 7.
    Grigorenko AY, Müller WH, Wille R, Yaremchenko SN (2012) Numerical solution of the problem of the stress-strain state in hollow cylinders using spline-approximations. J Math Sci 180(2):135–145MathSciNetCrossRefzbMATHGoogle Scholar
  8. 8.
    Heyliger PR (1991) Axisymmetric free vibration of finite anisotropic cylinders. J Sound Vib 148(3):507–520CrossRefGoogle Scholar
  9. 9.
    Hutchinson SR, El-Arhari SA (1986) Vibration of free hollow circular cylinder. ASME J Appl Mech 53:641–646CrossRefzbMATHGoogle Scholar
  10. 10.
    Kollar LP (1994) Three-dimensional analysis of composite cylinders under axially varying hydrothermal and mechanical loads. Comput Struct 50(4):525–540CrossRefGoogle Scholar
  11. 11.
    Kollar LP, Patterson JM, Springer GS (1992) Composite cylinders subjected to hydrothermal and mechanical loads. Int J Solids Struct 29(12):1519–1534CrossRefzbMATHGoogle Scholar
  12. 12.
    Loy CT, Lam KY (1999) Vibration of thick cylindrical shells on the basis of three-dimensional theory of elasticity. J Sound Vib 226(4):719–737CrossRefzbMATHGoogle Scholar
  13. 13.
    Lusher CP, Hardy VN (1988) Axisymmetric free vibration of transversely isotropic finite cylindrical rod. ASME J Appl Mech 55:855–862CrossRefzbMATHGoogle Scholar
  14. 14.
    Shi Z, Zhang T, Xiang H (2007) Exact solution of heterogeneous elastic hollow cylinders. Compos Struct 79(1):140–147CrossRefGoogle Scholar
  15. 15.
    So JI, Leisse AW (1997) Free vibrations of the thick hollow circular cylinders from three-dimensional analysis. Trans ASME J Vib Acoust 119(1):89–95CrossRefGoogle Scholar
  16. 16.
    Tahbildar VG, Gladwell GM (1972) Finite element analysis of axisymmetric vibration of cylinders. J Sound Vib 2(1):143–157zbMATHGoogle Scholar
  17. 17.
    Tsurkov I, Drach B (2010) Elastic deformation of composite cylinders with cylindrically orthotropic layers. Int J Solids Struct 47(1):25–33CrossRefzbMATHGoogle Scholar
  18. 18.
    Wang H-C, Banerjee PK (1990) Free vibration of axisymmetric solids by BEM using particular integrals. J Numer Mat Eng 5:985–1001CrossRefzbMATHGoogle Scholar
  19. 19.
    Wang H, Williams K (1996) Vibrational modes of thick cylinders of finite length. J Sound Vib 191(5):955–971CrossRefGoogle Scholar

Copyright information

© The Author(s) 2016

Authors and Affiliations

  • Alexander Ya. Grigorenko
    • 1
    Email author
  • Wolfgang H. Müller
    • 2
  • Yaroslav M. Grigorenko
    • 1
  • Georgii G. Vlaikov
    • 3
  1. 1.S.P. Timoshenko Institute of MechanicsNational Academy of Sciences of UkraineKievUkraine
  2. 2.Institut für MechanikTechnische Universität BerlinBerlinGermany
  3. 3.Technical CenterNational Academy Sciences of UkraineKievUkraine

Personalised recommendations