Abstract
In this chapter, a brief introduction on natural fibers (types, properties and advantages) is presented first to show their application in various industries. Then, nanoclay as one the most widely used fillers is presented. The structures, properties and applications of this filler are described with examples related to the nanocomposite industries. Then, the combination of nanoclay with synthetic and natural fibers to produce hybrid composite systems is reviewed showing recent achievements and activities in this field. Foamed materials are then introduced. The basic concepts of foaming are discussed followed by the effect of adding particles on structures and properties. Finally, composites and hybrid foams based on nanoclay and natural fiber is reviewed followed by a conclusion and openings for future works.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahmadzadeh, S., Keramat, J., Nasirpour, A., Hamdami, N., Behzad, T., Aranda, L., Vilasi, M., Desobry, S.: Structural and mechanical properties of clay nanocomposite foams based on cellulose for the food-packaging industry. J. Appl. Polym. Sci. (2015)
Ali, E.S., Ahmad, S.: Bionanocomposite hybrid polyurethane foam reinforced with empty fruit bunch and nanoclay. Compos. B Eng. 43, 2813–2816 (2012)
Anadão, P.: The use of montmorillonite clay in polymer nanocomposite foams. In: Mittal, V. (ed.) Polymer Nanocomposite Foams, pp. 149–168 (2013)
Arrakhiz, F.Z., Benmoussa, K., Bouhfid, R.: Pine cone fiber/clay hybrid composite: mechanical and thermal properties. Mater. Des. 50, 376–381 (2013)
Babaei, I., Madanipour, M., Farsi, M., Farajpoor, A.: Physical and mechanical properties of foamed HDPE/wheat straw flour/nanoclay hybrid composite. Compos. B Eng. 56, 163–170 (2014)
Chaudhary, A.K., Jayaraman, K.: Extrusion of linear polypropylene–clay nanocomposite foams. Polym. Eng. Sci. 51, 1749–1756 (2011)
Chen, L., Rende, D., Schadler, L.S., Ozisik, R.: Polymer nanocomposite foams. J. Mater. Chem. A 1, 3837–3850 (2013)
Faruk, O., Bledzki, A.K., Fink, H.P., Sain, M.: Biocomposites reinforced with natural fibers: 2000–2010. Prog. Polym. Sci. 37, 1552–1596 (2012)
Ghanbari, A., Heuzey, M.C., Carreau, P.J., Ton-That, M.T.: A novel approach to control thermal degradation of PET/organoclay nanocomposites and improve clay exfoliation. Polymers 54, 1361–1369 (2013)
Johansson, C., Bras, J., Mondragon, I., Nechita, P., Plackett, D., Šimon, P., Svetec, D.G., Virtanen, S., Baschetti, M.G., Breen, C., Clegg, F., Aucejo, S.: Renewable fibers and bio-based materials for packaging applications—a review of recent developements. BioResources 7, 2506–2552 (2012)
Keshtkar, M., Nofar, M., Park, C.B., Carreau, P.J.: Extruded PLA/clay nanocomposite foams blown with supercritical CO2. Polymers 55, 4077–4090 (2014)
Kord, B.: Nanofiller reinforcement effects on the thermal, dynamic mechanical, and morphological behavior of HDPE/rice husk flour composites. BioResources 6, 1351–1358 (2011)
Kord, B.: Effect of nanoparticles loading on properties of polymeric composite based on hemp fiber/polypropylene. J. Thermoplast. Compos. Mater. 25, 793–806 (2012)
Kord, B., Kiakojouri, S.M.H.: Effect of nanoclay dispersion on physical and mechanical properties of wood flour/polypropylene/glass fibre hybrid composites. BioResources 6, 1741–1751 (2011)
Koronis, G., Silva, A., Fontul, M.: Green composites: a review of adequate materials for automotive applications. Compos. B Eng. 44, 120–127 (2013)
Ku, H., Wang, H., Pattarachaiyakoop, N., Trada, M.: A review on the tensile properties of natural fiber reinforced polymer composites. Compos. B Eng. 42, 856–873 (2011)
Kumar, V., Singh, A.: Polypropylene clay nanocomposites. Rev. Chem. Eng. 29, 439–448 (2013)
La Mantia, F.P., Morreale, M.: Green composites: a brief review. Compos. A 42, 579–588 (2011)
Le Moigne, N., Sauceau, M., Benyakhlef, M., Jemai, R., Benezet, J.C., Rodier, E., Lopez-Cuesta, J.M., Fages, J.: Foaming of poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate)/organo-clays nano-biocomposites by a continuous supercritical CO2 assisted extrusion process. Eur. Polymer J. 61, 157–171 (2014)
Majeed, K., Jawaid, M., Hassan, A., Abu Bakar, A., Abdul Khalil, H.P.S., Salema, A.A., Inuwa, I.: Potential materials for food packaging from nanoclay/natural fibres filled hybrid composites. Mater. Des. 46, 391–410 (2013)
Mali, S., Yamashita, F., Grossmann, M.V.E.: Foams based on starch, bagasse fibers, and montmorillonite. In: Mittal, V. (ed.) Polymer Nanocomposite Foams, pp. 79–92 (2013)
Matsuda, D.K.M., Verceheze, A.E.S., Carvalho, G.M., Yamashita, F., Mali, S.: Baked foams of Cassava starch and organically modified nanoclays. Ind. Crops Prod. 44, 705–711 (2013)
Najafi, A., Kord, B., Abdi, A., Ranaee, S.: The impact of the nature of nanoclay on physical and mechanical properties of polypropylene/reed flour nanocomposites. J. Thermoplast. Compos. Mater. 25, 717–727 (2012a)
Najafi, N., Heuzey, M.C., Carreau, P.J., Wood-Adams, P.M.: Control of thermal degradation of polylactide (PLA)-clay nanocomposites using chain extenders. Polym. Degrad. Stab. 97, 554–565 (2012b)
Picard, E., Espuche, E., Fulchiron, R.: Effect of an organo-modified montmorillonite on PLA crystallization and gas barrier properties. Appl. Clay Sci. 53, 58–65 (2011)
Rahman, N.A., Hassan, A., Yahya, R., Lafia-Araga, R., Hornsby, P.: Polypropylene/glass fiber/nanoclay hybrid composites: Morphological, thermal, dynamic mechanical and impact behaviors. J. Reinf. Plast. Compos. 31, 1247–1257 (2012)
Ray, S.S.: Thermodynamics, molecular modeling, and kinetics of nanocomposite formation. In: Clay-Containing Polymer Nanocomposites: From Fundamentals to Real Applications, pp. 25–37 (2013a)
Ray, S.S.: Mechanical properties. In: Clay-Containing Polymer Nanocomposites: From Fundamentals to Real Applications, pp. 171–226 (2013b)
Ray, S.S.: Barrier properties. In: Clay-Containing Polymer Nanocomposites: From Fundamentals to Real Applications, pp. 227–241 (2013c)
Ray, S.S.: Thermal stability. In: Clay-Containing Polymer Nanocomposites: From Fundamentals to Real Applications, pp. 243–261 (2013d)
Rezanavaz, R., Aghjeh, M.K.R.: Relationship between the morphology and physico-mechanical properties of polyethylene/clay nanocomposites. In: IOP Conference Series: Materials Science and Engineering, vol. 40, pp. 1–10 (2012)
Saba, N., Tahir, P., Jawaid, M.: A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polymers 6, 2247–2273 (2014)
Sorrentino, L., Iannace, S.: Nanocomposite foams from high-performance thermoplastics. In: Mittal, V. (ed.) Polymer Nanocomposite Foams, pp. 189–231 (2013)
Tabuani, D.S.C., Camino, G.: Polypropylene nanocomposites, study of the influence of the nanofiller nature on morphology and material properties. In: Macromolecules Symposium, pp. 114–127 (2011)
Tsimpliaraki, A.I.T., Marras, S.I., Zuburtikudis, I., Panayiotou, C.: The effect of surface chemistry and nanoclay loading on the microcellular structure of porous Poly(d, l Lactic Acid) nanocomposites. J. Supercrit. Fluids 57, 278–287 (2011)
Vercelheze, A.E.S., Fakhouri, F.M., Dall’Antônia, L.H., Urbano, A., Youssef, E.Y., Yamashita, F., Mali, S.: Properties of baked foams based on Cassava starch, sugarcane bagasse fibers and montmorillonite. Carbohydr. Polym. 87, 1302–1310 (2012)
Yang, F., Manitiu, M., Kriegel, R., Kannan, R.M.: Structure, permeability and rheology of supercritical CO2 dispersed polystyrene-clay nanocomposites. Polymers 55, 3915–3924 (2014)
Yeh, S.-K., Liu, Y.-C., Wu, W.-Z., Chang, K.-C., Guo, W.-J., Wang, S.-F.: Thermoplastic polyurethane/clay nanocomposite foam made by batch foaming. J. Cell. Plast. 49, 119–130 (2013)
Yousefian, H., Rodrigue, D.: Effect of nano-crystalline cellulose on morphological, thermal and mechanical properties of Nylon 6 composites. Polym. Compos. (2014)
Yousefian, H., Rodrigue, D.: Effect of nano-crystalline cellulose, chemical blowing agent and mold temperature on the morphological, physical and mechanical properties of polypropylene. J. Appl. Polym. Sci. (2015)
Zandi, F., Rezaei, M., Kasiri, A.: Effect of nanoclay on the physical-mechanical and thermal properties and microstructure of extruded noncross-linked LDPE nanocomposite foams. Key Eng. Mater. 471–472, 751–756 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Yousefian, H., Rodrigue, D. (2016). Hybrid Composite Foams Based on Nanoclays and Natural Fibres. In: Jawaid, M., Qaiss, A., Bouhfid, R. (eds) Nanoclay Reinforced Polymer Composites. Engineering Materials. Springer, Singapore. https://doi.org/10.1007/978-981-10-0950-1_3
Download citation
DOI: https://doi.org/10.1007/978-981-10-0950-1_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0949-5
Online ISBN: 978-981-10-0950-1
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)