Advertisement

State of Arts in Experimental Testing of TBCs Systems—Literature Analysis

  • Tomasz SadowskiEmail author
  • Przemysław Golewski
Chapter
Part of the SpringerBriefs in Applied Sciences and Technology book series (BRIEFSAPPLSCIENCES)

Abstract

Tests of TBC strength properties are complex and require utilising many modern methods.

Keywords

Acoustic Emission Bond Coat Uniaxial Tensile Test Double Cantilever Beam Standard Coating 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Pfeiffer C, Affeldt E, Göken M (2011) Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings. Surf Coat Technol 205:3245–3250Google Scholar
  2. 2.
    Zhao PF, Li XD, Shang FL, Li CJ (2011) Interlamellar cracking of thermal barrier coatings with TGOs by non-standard four-point bending tests. Mater Sci Eng A 528:7641–7647Google Scholar
  3. 3.
    Arai M, Okajima Y, Kishimoto K (2007) Mixed-mode interfacial fracture toughness for thermal barrier coating. Eng Fract Mech 74:2055–2069Google Scholar
  4. 4.
    Guo PQ, Mumm DR, Karlsson AM, Kagawa Y (2005) Measurement of interfacial shear mechanical properties in thermal barrier coating systems by a barb pullout method. Scr Mater 53:1043–1048Google Scholar
  5. 5.
    Tassini N, Lambrinou K, Mircea I, Bartsch M, Patsias P, Van der Biest O (2007) Study of the amplitude-dependent mechanical behaviour of yttria-stabilised zirconia thermal barrier coatings. J Eur Ceram Soc 27:1487–1491Google Scholar
  6. 6.
    Aleksanoglu H, Scholz A, Oechsner M, Berger C, Rudolphi M, Schütze M, Stamm W (2013) Determining a critical strain for APS thermal barrier coatings under service relevant loading conditions. Int. J. Fatigue 53:40–48Google Scholar
  7. 7.
    Wakui T, Malzbender J, Steinbrech RW (2006) Mechanical testing of thermally stressed materials with rough interfaces: mechanically induced delamination cracking in thermal barrier composites. Surf Coat Technol 200:5419–5426Google Scholar
  8. 8.
    Yamazaki Y, Schmidt A, Scholz A (2006) The determination of the delamination resistance in thermal barrier coating system by four-point bending tests. Surf Coat Technol 201:744–754Google Scholar
  9. 9.
    Bouzakis KD, Lontos A, Michailidis N, Knotek O, Lugscheider E, Bobzin K, Etzkorn A (2003) Determination of mechanical properties of electron beam-physical vapor deposition-thermal barrier coatings (EB-PVD-TBCs) by means of nanoindentation and impact testing. Surf Coat Technol 163–164:75–80Google Scholar
  10. 10.
    Mao WG, Dai CY, Yang L, Zhou YC (2008) Interfacial fracture characteristic and crack propagation of thermal barrier coatings under tensile conditions at elevated temperatures. Int J Fract 151:107–120Google Scholar
  11. 11.
    Qiana L, Zhua P, Kagawaa Y, Kubob T (2003) Tensile damage evolution behavior in plasma-sprayed thermal barrier coating system. Surf Coat Technol 173:178–184Google Scholar
  12. 12.
    Zhou YC, Tonomori T, Yoshida A, Liu L, Bignall G, Hashida T (2002) Fracture characteristics of thermal barrier coatings after tensile and bending tests. Surf Coat Technol 157:118–127Google Scholar
  13. 13.
    Li CJ, Wang WZ, He Y (2003) Measurement of fracture toughness of plasma-sprayed Al2O3 coatings using a tapered double cantilever beam method. J Am Ceram Soc 86:1437–1439Google Scholar
  14. 14.
    Zhang H, Li DY (2005) Application of a novel lateral force-sensing microindentation method for evaluation of the bond strength of thermal sprayed coatings. Surf Coat Technol 197:137–141Google Scholar
  15. 15.
    Ciszewski A, Radomski T (1989) Structural materials in mechanical engineering. PWN, Warszawa (in Polish)Google Scholar
  16. 16.
    Wang X, Tint P, Chiu M, Atkinson A (2012) Stiffness of free-standing thermal barrier coating top coats measured by bending tests. Acta Mater 60:3247–3258Google Scholar
  17. 17.
    Evans AG, Mumm D R, Hutchinson JW, Meier GH, Pettit FP (2001) Mechanisms controlling the durability of thermal barrier coatings. Prog Mater Sci 46:505–553Google Scholar
  18. 18.
    Li Y, Khor KA (2002) Mechanical properties of the plasma-sprayed Al2O3YZrSiO4 coatings. Surf Coat Technol. 150:143–150Google Scholar
  19. 19.
    Johnson CA, Ruud JA, Bruce R, Wortman D (1998) Relationships between residual stress, microstructure and mechanical properties of electron beam-physical vapor deposition thermal barrier coatings. Surf Coat Technol 108–109:80–85Google Scholar
  20. 20.
    Żórawski W (2009) Residual stresses in thermal sprayed coatings. In: Welding Technology Review, vol. 9, pp 63–70 (in Polish)Google Scholar
  21. 21.
    Choi PR, Zhu D, Miller RA (2005) Fracture behavior under mixed-mode loading of ceramic plasma-sprayed thermal barrier coatings at ambient and elevated temperatures. Eng Fract Mech 72:2144–2158Google Scholar
  22. 22.
    Ray AK, Roy N, Kar A, Ray AK, Bose PC, Das G, Sahu JK, Das DK, Venkataraman B, Joshi PV (2009) Mechanical property and characterization of a NiCoCrAlY type metallic bond coat used in turbine blade. Mater Sci Eng A 505:96–104Google Scholar
  23. 23.
    Qian G, Nkamura T, Berndt CC, Leigh PH (1997) Tensile toughness test and high temperature fracture analysis of thermal barrier coatings. Acta Mater 45:1767–1784Google Scholar
  24. 24.
    Cao NY, Kagawa Y, Liu YF (2008) Stress analysis of a barb test for thermal barrier coatings. Surf Coat Technol 202:3413–3418Google Scholar
  25. 25.
    Eberl C, Gianola DP, Wang X, He MY, Evans AG, Hemker KJ (2011) A method for in situ measurement of the elastic behavior of a columnar thermal barrier coating. Acta Mater 59:3612–3620Google Scholar
  26. 26.
    Wen PF, Yan WZ, Kang JX, Liu J, Yue ZF (2010) Simulation of the interface characterization of thin film on substrate system by bending creep tests. Appl Surf Sci 257:1289–1294Google Scholar
  27. 27.
    Mao WG, Dai CY, Zhou YC, Liu QX (2007) An experimental investigation on thermo-mechanical buckling delamination failure characteristic of air plasma sprayed thermal barrier coatings. Surf Coat Technol 201:6217–6227Google Scholar
  28. 28.
    Park JH, Kim JP, Lee KH (2007) Acoustic emission characteristics for diagnosis of TBC damaged by high-temperature thermal fatigue. J Mater Process Technol 187–188:537–541Google Scholar
  29. 29.
    Yao WB, Dai CY, Mao WG, Lu C, Yang L, Zhou YC (2012) Acoustic emission analysis on tensile failure of air plasma-sprayed thermal barrier coatings. Surf Coat Technol 206:3803–3807Google Scholar
  30. 30.
    Jadhav AD, Padture NP (2008) Mechanical properties of solution-precursor plasma-sprayed thermal barrier coatings. Surf Coat Technol 202:4976–4979Google Scholar
  31. 31.
    Mumm DR, Watanabe M, Evans AG Pfaendtner JA (2004) The influence of test method on failure mechanisms and durability of a thermal barrier system. Acta Mater 52:1123–1131Google Scholar
  32. 32.
    Yan J, Leist T, Bartsch M, Karlsson AM (2008) On cracks and delaminations of thermal barrier coatings due to indentation testing: experimental investigations. Acta Mater 56:4080–4090Google Scholar
  33. 33.
    Zhao PF, Sun CA, Zhu XY, Shang FL, Li CJ (2010) Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending method. Surf Coat Technol 204:4066–4074Google Scholar
  34. 34.
    Vasinonta A, Beuth JL (2001) Measurement of interfacial toughness in thermal barrier coating systems by indentation. Eng Fract Mech 68:843–860Google Scholar

Copyright information

© The Author(s) 2016

Authors and Affiliations

  1. 1.Department of Solid MechanicsLublin University of TechnologyLublinPoland

Personalised recommendations