Abstract
The definition of Euler–Bernoulli beam elements is summarized in Table 3.1. The derivation in lectures normally starts with the introduction of an elemental coordinate system (x, z) where the x-axis is aligned with the principal axis of the element and the z-axis is perpendicular to the element. Based on the definition of this element, displacements \((u_{1z},u_{2z})\) can only occur perpendicular to the principal axis while the rotations \((\varphi _{1y},\varphi _{2y})\) act around the y-axis.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
This assumption is taken if a cross sectional area A is specified in the first geometry data field. If \(A=0\) is entered in the first geometry field, Marc uses the beam section data corresponding to the section number given in the second geometry field \((I_x)\). This allows specification of the torsional stiffness factor unequal to \(I_x + I_y\) or the specification of arbitrary sections using numerical section integration, see [7].
- 2.
The given second moment of area allows to calculate the side length.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Öchsner, A., Öchsner, M. (2016). Euler–Bernoulli Beams and Frames. In: The Finite Element Analysis Program MSC Marc/Mentat. Springer, Singapore. https://doi.org/10.1007/978-981-10-0821-4_3
Download citation
DOI: https://doi.org/10.1007/978-981-10-0821-4_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0820-7
Online ISBN: 978-981-10-0821-4
eBook Packages: EngineeringEngineering (R0)