Abstract
Today, additive manufacturing (AM), which refers to a process by which digital design data is used to build up artifacts by decomposing material, is gaining growing interest from industry. The AM’s capability for producing complex structure in extremely small lot size can enable more optimal design for today’s manufacturing products. Through such optimal design of each product, energy and material consumption of society can be significantly reduced. As AM can produce a wide variety of components in one-by-one production, the total number of the products (and components) can be significantly reduced. In addition, the products made by AM can be optimally designed and manufactured for each particular purpose. This implies these products have no unused functions that may consume additional energy and materials. The objective of the paper is to propose the method for evaluating AM’s potential for reducing environmental impact of society considering these factors caused by introducing AM technology into industry.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Diegel O, Singamneni S, Reay S, Withell A (2010) Tools for sustainable product design: additive manufacturing. J Sustain Dev 2(3):68–75
Huang SH, Liu P, Mokasdar A (2013) Additive manufacturing and its societal impact: a literature review. Int J Adv Manuf Technol 67:1191–1203
Bourhis FL, Kerbrat O, Dembinski L, Hascoet JY, Mognol P (2014) Predictive model for environmental assessment in additive manufacturing process. Procedia CIRP 15:16–31
Faludi J, Bayley C, Bhogal S, Iribarne M (2014) Comparing environmental impacts of additive manufacturing vs. traditional machining via life-cycle assessment. Rapid Prototyp J. Laboratory for Manufacturing and Sustainability, UC Berkeley. Retrieved from: http://escholarship.org/uc/item/0gv882qk
SME (2010) Available from http://www.sme.org/cgi-bin/communities.pl?/communities/techgroups/ddm/what_is_ddm.htm&&&SME
Kondoh S, Masui K, Hattori M, Mishima N (2008) Total performance analysis of product life cycle considering the deterioration and obsolescence of product value. Int J Prod Dev 6(3/4):334–352
Umeda Y et al (2009) Proposal of sustainable society scenario simulator. CIRP J Manuf Sci Technol 1(4):272–278
Komoto H, Tomiyama T, Silvester S, Brezer H (2006) Life cycle simulation of products in a competitive market. In: Proceedings of the 13th CIRP international conference on life cycle engineering, Leuven, pp 233–237
Keeney RL, Raiffa H (1976) Decisions with multiple objectives: preferences and value tradeoffs. Wiley, New York
Green PE, Srinivasan V (1978) Conjoint analysis in consumer research: issues and outlook. J Mark Res XV:132–136
Daimon T, Kondoh S, Umeda Y (2004) Proposal of decision support method for life cycle strategy by estimating value and physical lifetimes. In: Proceedings of the 11th international CIRP life cycle engineering seminar, Belgrade
Acknowledgments
This research is partially financially supported by Grant-in-Aid for Scientific Research (No.15K00715), JSPS, Japan.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer Japan
About this chapter
Cite this chapter
Kondoh, S., Tateno, T., Kishita, Y., Komoto, H., Fukushige, S. (2017). The Potential of Additive Manufacturing Technology for Realizing a Sustainable Society. In: Matsumoto, M., Masui, K., Fukushige, S., Kondoh, S. (eds) Sustainability Through Innovation in Product Life Cycle Design. EcoProduction. Springer, Singapore. https://doi.org/10.1007/978-981-10-0471-1_32
Download citation
DOI: https://doi.org/10.1007/978-981-10-0471-1_32
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0469-8
Online ISBN: 978-981-10-0471-1
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)