Abstract
The prospect of TRC as a legitimate alternative to common construction materials shows promise of many advantages including cost reduction, sustainability, and structural longevity. An automated TRC manufacturing process based on the standard industrial techniques was developed and used to produce and test full scale TRC composite structural sections including plate, L, hat, T, and C sections. These sections were tested in direct tension and compression at a length of up to 1.2 m to study the mechanical response of these full-scale sections. Results were compared to the coupon responses to determine reduction in strength due to changes in geometry and connection types.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Igarashi, S., Bentur, A., Mindess, S.: The effect of processing on the bond and interfaces in steel fiber reinforced cement composites. Cem. Concr. Compos. 18, 313–322 (1996)
Mobasher, B., Pivacek, A., Haupt, G.J.: Cement based cross-ply laminates. J. Adv. Cem. Based Mater. 6, 144–152 (1997)
Mobasher, B., Peled, A., Pahilajani, J.: Distributed cracking and stiffness degradation in fabric-cement composites. Mater. Struct. 39, 317–331 (2006)
Peled, A., Bentur, A., Yankelevsky, D.: Flexural performance of cementitious composites reinforced with woven fabrics. ASCE J. of Mater. Civil Eng. 11(4), 325–330 (1999)
Peled, A., Mobasher, B.: Pultruded fabric-cement composites. ACI Mater. J. 102(1), 15–23 (2005)
Peled, A., Sueki, S., Mobasher, B.: Bonding in fabric–cement systems: effects of fabrication methods. Cem. Concr. Res. 36(9), 1661–1671 (2006)
Peled, A., Mobasher, B.: Tensile behavior of fabric cement-based composites: pultruded and cast. ASCE J. Mater. Civil Eng. 19(4), 340–348 (2007)
Peled, A., Cohen, Z., Gries, T.: Influences of textile characteristics on the tensile properties of warp knitted cement based composites. Cem. Concr. Compos. 30, 174–183 (2008)
Sasi, E., Peled, A.: Three dimensional (3D) fabrics as reinforcements for cement based composites. Compos. Part A 74, 153–165 (2015)
Soranakom, C., Mobasher, B.: Geometrical and mechanical aspects of fabric bonding and pullout in cement composites. Mater. Struct. 42, 765–777 (2009)
Sueki, S., Soranakom, C., Mobasher, B., Peled, A.: Pullout-slip response of fabrics embedded in a cement paste matrix. ASCE J. Mater. Civil Eng. 19(9), 718–727 (2007)
Wastiels, J., Remy, O.: Industrial processing technique for textile reinforced cement composites with structural use. In: Parra-Montesinos, G.J., Reinhardt, H.W., Naaman, A.E. (eds.) HPFRCC 6, pp. 511–518 (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 RILEM
About this paper
Cite this paper
Bauchmoyer, J., David, D.S.K., Mehere, H., Dey, V., Mobasher, B. (2018). Pultruded Textile Reinforced Concrete Structural Shapes. In: Mechtcherine, V., Slowik, V., Kabele, P. (eds) Strain-Hardening Cement-Based Composites. SHCC 2017. RILEM Bookseries, vol 15. Springer, Dordrecht. https://doi.org/10.1007/978-94-024-1194-2_87
Download citation
DOI: https://doi.org/10.1007/978-94-024-1194-2_87
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-024-1193-5
Online ISBN: 978-94-024-1194-2
eBook Packages: EngineeringEngineering (R0)