Abstract
By now the conceptual model has become site-specific with increased details provided by the results from the surface geophysical data. Both background and anomalous conditions have been defined along with their lateral extent. Our focus now shifts to obtaining site-specific geologic details along with engineering, hydrologic and contaminant data. We can now, with a reasonable degree of certainty, develop an effective invasive program and locate direct push measurements, borings, sampling points, trenches and excavations in a logical way so that they provide representative measurements of background and anomalous geologic conditions. Furthermore, by increasing the spatial representativeness of this data, we can obtain sufficient data using fewer invasive measurements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASTM (2006) Standard guide for use of hollow-stem augers for geoenvironmental exploration and the installation of subsurface water-quality monitoring devices. D5784-95(2006). American Society for Testing and Materials, West Conshohocken
ASTM (2008) Standard guide for using rock-mass classification systems for engineering purposes. D5878-08. American Society for Testing and Materials, West Conshohocken
ASTM (2009) Standard practice for soil exploration and sampling by auger borings. D1452-09. American Society for Testing and Materials, West Conshohocken
ASTM (2010a) Standard practice for using the electronic piezocone penetrometer tests for environmental site characterization. D6067-10. American Society for Testing and Materials, West Conshohocken
ASTM (2010b) Standard practice for expedited site characterization of vadose and ground water contamination at hazardous waste contaminated sites. D6235-04(2010). American Society for Testing and Materials, West Conshohocken
ASTM (2010c) Standard practice for sonic drilling for site characterization and the installation of subsurface monitoring devices. D6914-04(2010). American Society for Testing and Materials, West Conshohocken
ASTM (2011) Standard test method for standard penetration test (STP) and split-barrel sampling of soils. D1586-11. American Society for Testing and Materials, West Conshohocken
ASTM (2012a) Standard guide for field logging of subsurface explorations of soil and rock. D5434-12. American Society for Testing and Materials, West Conshohocken
ASTM (2012b) Standard test method for electronic friction cone and piezocone penetration testing of soils. D5778-12. American Society for Testing and Materials, West Conshohocken
ASTM (2012c) Standard guide for direct-push groundwater sampling for environmental site characterization. D6001-05(2012). American Society for Testing and Materials, West Conshohocken
ASTM (2014) Standard practice for rock core drilling and sampling of rock for site investigation. D2113-14. American Society for Testing and Materials, West Conshohocken
Bell FG (2004) Engineering geology and construction. Spoon Press, London
Christy CD et al (1994) A percussion probing tool for the direct sensing of soil conductivity, Geoprobe technical paper no. 94-100, Geoprobe Salinas, Kansas
Fookes PG (1997) Geology for engineers: the geological model, prediction and performance. Geol Soc Q J Eng Geol 30(4):293–424
Haneberg WC (2009) Rapid prototyping of computer models to characterize discontinuous rock masses. Geo-Strata, March/April, pp 22, 24–26
Hatheway AW (1982) Trench, shaft, and tunnel mapping. Bull Assoc Eng Geol 19(2):173–180
Hatheway AW, Leighton FB (1979) Trenching as an exploratory method. In: Hatheway AW, McClure CR Jr (eds) Geologic society of America, geology in the siting of nuclear power plants. Rev Eng Geol 4:169–195
Hatheway AW, McClure CR Jr (eds) (1979) Geology in the siting of nuclear power plants. Geol Soc Am Rev Eng Geol 4:169–195
Hencher S (2012) Practical engineering geology, applied geotechnics, vol 4. Spoon Press, London
Hopkins R (1977) TVA philosophy and methods for site investigation. In: Butler D (ed) Symposium on cavity detection of subsurface cavities. U.S. Army Engineers Waterways Experiment Station Vicksburg, Vicksburg, pp 25–26
Hunt RE (2005) Geotechnical engineering investigation handbook, 2nd edn. CRC Press/Taylor and Francis, Boca Raton
Hvorselv MJ (1949) Surface exploration and sampling of soils for civil engineering purposes. The Waterways Experiment Station, Vicksburg
Keaton JR (2009) Close-range terrestrial photogrammetry for geotechnical characterization and visualization. Geo-Strata, March/April, pp 18–20
Khedr SA et al (1985) Automated cone penetrometer a non-destructive field test for subgrade evaluation. Annual transportation research board meeting, National Academy of Sciences, Washington, DC
Kratochvil G (1989) Geological evaluation of potential hazards to shuttle landing operations on Rodgers Dry Lakebed. Astronaut Office NASA Lyndon B Johnson Space Center Houston Texas, Edwards Air Force Base
Kratochvil G et al (1992) Fishing for fissures. The Military Engineer, Jan–Feb, pp 66–68
McCall W et al (2006) Use of direct push technologies in environmental site characterization and ground-water monitoring. In: Nielsen DM (ed) Practical handbook of environmental site characterization and ground-water monitoring, 2nd edn. CRC Taylor & Francis, Boca Raton, pp 345–471
McCalpin JP, Shlemon RJ (1996) Trenching as a tool in geologic investigations. Prof Geol 33(12):19–22
Nielsen D (ed) (2006) Practical handbook of environmental site characterization and ground water monitoring, 2nd edn. CRC Taylor & Francis, Boca Raton
Ruda T, Farrar J (2006) Environmental drilling for soil sampling, rock coring, borehole logging, and monitoring well installation. In: Nielsen DM (ed) Practical handbook of environmental site characterization and ground water monitoring, 2nd edn. CRC Taylor & Francis, Boca Raton, pp 297–344
Sara MN (2003) Site assessment and remediation handbook, 2nd edn. Lewis Publishers, New York
Schulmeister MK et al (2003) Direct-push electrical conductivity logging for high-resolution hydrostratigraphic characterization. Ground Water Monit Remediat Summer 23(3):52–62
Sowers GF (1996) Building on sinkholes, design and construction of foundations in karst terrain. ASCE Press, Reston (out of print)
Waltham AC, Fookes PG (2003) Engineering classification of karst ground conditions. Geol Soc Lond Q J Eng Geol 36(2):101–118
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Dordrecht.
About this chapter
Cite this chapter
Benson, R.C., Yuhr, L.B. (2016). Invasive Methods. In: Site Characterization in Karst and Pseudokarst Terraines. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-9924-9_17
Download citation
DOI: https://doi.org/10.1007/978-94-017-9924-9_17
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-9923-2
Online ISBN: 978-94-017-9924-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)