Abstract
A study of quench agitation by immersion speed variation was carried out on a C30 carbon steel material and examination of resulting mechanical properties. Quenching was carried out in a special extended height bath under conditions of constant bath temperature and a variable immersion speed. Material thermal history data was taken during the quench process and mechanical properties comprising of hardness and tensile strength of material were examined thereafter. Immersion speed variation was effected by a variable weight-force application acting on the quenched C30 specimen falling freely through an extended height quench bath. At immersion speeds of 0.106, 0.697, 0.853, 1.065 and 1.139 m/s; the yield strength of the material are 310.40, 496.12, 500.56, 565.40 and 579.92 MN/m2 respectively while at a typical location of radius 15 mm on specimen mid-height the corresponding hardness values at the respective immersion speeds are 275, 293.40, 454.60, 408 and 594 VHN. There is an enhancement of mechanical strength with immersion speed increase.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASM Handbook: Heat Treating of Aluminium Alloys. Heat treating, vol. 4, 10th edn, pp. 823–873. ASM International, Materials Park (1995)
Cavaliere, P., Cerri, E., Leo, P.: Effect of heat treatment on mechanical properties and fracture behavior of a thixocast A356 aluminum alloy. J. Mater. Sci. 39, 1653–1658 (2004)
Bohumil, T., Steven, D., Spanielka, J.S.: Effect of agitation work on heat transfer during cooling in oil isorapid 277HM. J. Mech. Eng. 58(2), 102–106 (2012)
Caner, S., Hakan-Gur, C.: A simulation of the quenching process for predicting temperature, microstructure and residual stresses. J. Mech. Eng. 56(2), 93–103 (2010)
Rometsch, P.A., Starink, M.J., Gregson, P.J.: Improvements in quench factor modeling. Mater. Sci. Eng. 339(1–2), 255–264 (2003)
Totten, G.E., Bates, C.E., Clinton, N.A.: Quenching system design, handbook of quenchant and quenching technology, vol. 119, pp. 339–411. ASM International, Materials Park (1993)
Hanguang, F., Xiaole, C., Zhongze, D., Yingping, L., Zhenjun, F.: Effect of quenching temperature on structure and properties of centrifugal casting of high speed steel roll. J. Res. Dev. 6(1), 15–19 (2009)
Fontecchio, M., Maniruzzaman, M., Sission Jr. R.D.: The effect of bath temperature and agitation rate on the quench severity of 6061 aluminium in distilled water. In: Proceedings of the 21st heat treating society conference, Indianapolis (2002)
Liscic, B., Totten, G.E., Howes, M.A.H. (eds.): Steel Heat Treatment Handbook, vol. 97. Marcel Dekker, New York (1997). Chap. 3
Ma Shuhui, Aparna, S.V., Makiko, T., Dareeell, K.R., Maniruzzaman, M.D., Sisson Jr. R.D.: Quenching–understanding, controlling and optimizing the process. In: Proceedings of the 4th international conference on quenching and the control of distortion. Beijing, 20–23 May 2003
Chen, N., Han, I., Zhang, W., Hao, X.: Enhancing mechanical properties and avoiding cracks by simulation of quenching connecting rods. Mater. Lett. 61, 3021–3024 (2007)
Kim, C.K., Lee, D.G., Lee, S.: Correlation of microstructure and fracture properties of five centrifugal cast high speed steel rolls. Mater. Sci. Technol. 23(9), 1065–1074 (2007)
Taraba, B., Spanielka, J.: Combined heat transfer coefficient calculation for cooled probe to 850 °C in quenching oil. In: The international conference of the Carpathian Euro – region specialists in Industrial Systems, North University of Baia Mare, Romania, pp. 281–286 (2010)
Lenumadi, F.Z., Chala, A., Ferhati, S., Chabane, F., Benramache, S.: Structural and mechanical behavior during quenching of 40CrMoV5 steel. J. Sci. Eng. 3(1), 1–6 (2013)
Hasan, H.S., Peet, M.J., Jalil, J.M., Bhadeshia, K.H.D.: Heat transfer coefficients during quenching of steels. http://www.template-div-transfer_Hasan_2011.pdf (2014). Accessed 25 Feb 2014
Momoh, I.M., Akinribide, O.J., Ayanleke, J., Olowonubi, J., Olorunfemi, G.O., Oshodin, T.: Investigating the mechanical properties of post weld heat treated 0.33 % C low alloy steel. Int. J. Sci. Technol. 2(6), 433–437 (2013)
Adedayo, S.M., Adekunle, A.S., Oladimeji, T.E.: Effect of immersion speed on mechanical properties of a quenched C30 carbon steel. Lecture notes, in engineering and computer science: proceedings of the world congress on engineering 2014, WCE 2014, pp. 1233–1237. London, 2–4 July 2014
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer Science+Business Media Dordrecht
About this paper
Cite this paper
Adedayo, S.M., Adekunle, A.S., Oladimeji, T.E. (2015). Effecting Quench Agitation by Immersion Speed Variation of C30 Carbon Steel and Mechanical Properties Examination. In: Yang, GC., Ao, SI., Gelman, L. (eds) Transactions on Engineering Technologies. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-9804-4_14
Download citation
DOI: https://doi.org/10.1007/978-94-017-9804-4_14
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-9803-7
Online ISBN: 978-94-017-9804-4
eBook Packages: EngineeringEngineering (R0)