Advertisement

Leonid Nikolayevich Reshetov (1906–1998)

  • Valentin B. TarabarinEmail author
  • Zinaida I. Tarabarina
  • Darya Chirkina
Chapter
Part of the History of Mechanism and Machine Science book series (HMMS, volume 26)

Abstract

This paper will discuss the life and career of Leonid Nikolayevich Reshetov, professor of MSTU, Honored Inventor of RSFSR. He was a great engineer, scientist and inventor. His contribution to the science of Mechanisms and Machines is truly invaluable; he took an active part in improvement of courses in the Theory of Mechanisms and Machines and development of Machinery Design. He developed a new research area in Theory of Mechanisms and Machines: Theory of Rational Mechanisms, also known as self-aligning mechanisms. For many years he was the curator of the Collection of Mechanisms at the Department of TMM. More than 100 models were made by students at workshops of the Department under his direction and by using his inventions, pictures and his own experimental model.

Keywords

Internal Combustion Engine Tooth Gearing Rational Mechanism Gear Pair Pressure Angle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

Reshetov’s Main Works

  1. Engineer Reshetov LN, Ass. Prof. of KMMMI (1935) The correction of involute gearing, methods and justifications, ONTI NKTP (combining science and technical publishers of Narkomtiazhprom) of USSR, Moscow-Leningrad, 144 pGoogle Scholar
  2. Reshetov LN (1934) Cam mechanisms of turning automatic, Moscow: sector of manuals of Kr. MMMI, 54 pGoogle Scholar
  3. Reshetov LN (1953) Cam mechanisms. “Mashgiz”, Moscow, 427 pGoogle Scholar
  4. Reshetov LN (1966) Toropygin E.I. profiling of cams by curves of conic section. “Mashinostroenie (Mechanical Engineering)”, Moscow, 152 pGoogle Scholar
  5. Reshetov LN (1972) Designing of rational mechanisms. “Mashinostroenie (Mechanical engineering)”, Moscow, 256 pGoogle Scholar
  6. Reshetov LN (1986) Self-Aligning mechanisms. Reference book, Translated from Russian by L. Sachs, “Mir (World)”, Moscow, 528 p (in English)Google Scholar
  7. Reshetov L (1955) Designing of auditorium blackboards. Problems of the theory of mechanisms and machines. 125 years to Bauman MHTS, “Mashgiz”, Moscow, 123 pGoogle Scholar
  8. Reshetov LN (1974) Models of mechanisms. Hand-written album. Bauman MHTS, TMM Department, MoscowGoogle Scholar

Other References

  1. Aliev S (1974) The research and choice of optimum parameters of two-level current collectors of an electro rolling-stock of the main railways. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  2. Bogolubsky K (1951) Geometrical theory of spatial gearings made from ram–machined toothed wheels. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  3. Budyka EY (1976) Output mechanisms of structural formulas logical way. News of higher educational institutions. Mashinostroenie, no 8, pp 71–73 (in Russian)Google Scholar
  4. Dobjinskiy DP (2002) Main article about self-aligning. Site for designers and engineers of various industries. “Correct structure of machines”, The Internet Site http://www.pravmash.ru
  5. Ermak V (1973) The analysis of counterbalancing devices of two-line tooth gearings. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  6. Golovin A, Golovina A (2012) Applied mechanics: the information sheets of Professor Leonid Smirnov. In: Koetsier T, Ceccarelli M (eds) Explorations in the history of machines and mechanisms. Proceedings of HMM2012. History of mechanisms and machines science, vol 15. Springer, 594 pGoogle Scholar
  7. Golovin AA, Tarabarin VB, Tarabarina ZI (2007) Collection of mechanisms Bauman’s: Scientific schools of Professors of L. Reshetov and V. Gavrilenko. In: Proceedings “Twelfth Word Congress in MMS”, Besancon, France, 17–21 June 2007 (in Russian)Google Scholar
  8. Golovin A, Tarabarin V (2008) Russian models from the mechanisms collection of Bauman University. In: Ceccarelli M (ed) History of mechanisms and machines science, vol 5. Springer, 238 pGoogle Scholar
  9. Gulida I (1972) The research of an error of the multispan revolving furnaces and synthesis its mechanisms without redundant connection. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  10. Kojevnikov SN (1979) The basis of the structural synthesis of mechanisms. Kiev. Naukova Dumka, 231 p, ill (in Russian)Google Scholar
  11. Kraynev A (2003) Ideology of designing. Mashinostroenie, Moscow, 384 p, illGoogle Scholar
  12. Lukichev DM, Savelova AA (1968) Theory of mechanisms and machines. Lecture course. Issue 1 (Edition 2). Part “Crank linkages and cam mechanisms”. Reshetov LN (ed) Bauman MSTU Publishing, Mocквa, 112 p (in Russian)Google Scholar
  13. Malkin L (1947) Cylindrical gears with variable transmission ratio, which was form out of round’s cod-wheel. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  14. Malysheva ZS, Gluhov NA, Minut SB, Petrov GN (1959) Theory of mechanisms and machines. Lecture course. Issue 4. Part “Dynamics of mechanisms and machines”. Reshetov LN (ed) Bauman MSTU Publishing, Mocквa, 94 p (in Russian)Google Scholar
  15. Nemkevich A (1965) The research of printing mechanism of typewriter. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  16. Pavlenko N (1971) The research of mechanisms of automatic drives of multi-position devices of an electric railroad rolling train. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  17. Pavlova LA (1976) Graph method in the structural study of the mechanisms of space. Dissertation, Candidate Technical Science—M.: BMHTS 187 p (in Russian)Google Scholar
  18. Popov SA, Lukichev DM, Nikonorov VA et al (1962) Theory of mechanisms and machines. Lecture course. Issue 5. Reshetov LN (ed) Bauman MSTU Publishing, Mocквa, 126 p (in Russian)Google Scholar
  19. Samohvalov Y (1970) The analysis and dynamics of mechanisms of drums for assembly of auto tires. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  20. Savelova AA, Lukichev DM, Musatov AK, Nikonorov VA (1959) Theory of mechanisms and machines. Lecture course. Issue 3. Part “Dynamics of mechanisms and machines”. Reshetov LN (ed) Bauman MSTU Publishing, Mocквa, 101 p (in Russian)Google Scholar
  21. Scientific Schools of Bauman Moscow State University (2005) In: Fedorova IB, Kolesnikova KS (eds) History of development, 2nd ed. BMSTU Publishing House, Moscow, 464 p, ill, (in Russian)Google Scholar
  22. Shamaidenko NE (1965) Investigation of the influence of friction on the links samoustanavlivaemost mechanisms. Dissertation, Candidate Technical Science, BMHTS, Moscow, 177 p (in Russian)Google Scholar
  23. Skvortcova NA, Musatov AK (1956) Theory of mechanisms and machines. Lecture course. Issue 2. Part “Cilindrical involute gearings”. Reshetov LN (ed) Bauman MSTU Publishing, Mocквa, 104 p (in Russian)Google Scholar
  24. Soldatkin E (1969) Gearings with variable axle angle. The dissertation on competition of a scientific degree of Canada Science and Technology—M.: BMHTS (in Russian)Google Scholar
  25. Solomin V (1968) The synthesis of guide mechanism current pantographs for an electro rolling-stock. In: Proceedings of institutes of higher education. Mechanical Engineering, No 11 (in Russian)Google Scholar
  26. Tarabarin V (2009) Leonid Nikolayevich Reshetov. The life and professional activity. «Science and Education». Electron J. Public registration 0420900025, Jun 2009. www.technomag.edu.ru (in Russian)

Copyright information

© Springer Science+Business Media Dordrecht 2014

Authors and Affiliations

  • Valentin B. Tarabarin
    • 1
    • 3
    Email author
  • Zinaida I. Tarabarina
    • 1
    • 3
  • Darya Chirkina
    • 2
    • 3
  1. 1.Department of Theory of Mecnanisms and MachinesBMSTUMoscowRussia
  2. 2.Department of CAD SystemsBMSTUMoscowRussia
  3. 3.Faculty of Robotics and Complex Automatisation, Department of Theory of Mechanisms and MachinesBMSTUMoscowRussia

Personalised recommendations