Abstract
This paper reviews the recent research achievements by the author on the construction of a cavitation erosion database, and on the data analysis of carbon steel, stainless steel, cast iron and nonferrous alloys. His studies on cavitation erosion mechanisms, temperature effects on cavitation erosion in liquid metals are also reviewed. Finally, an erosion prediction method based on impact load measurements is discussed. It was found that the erosion resistance of carbon steels, stainless steels, cast iron, aluminum alloys, copper alloys and titanium alloys can be estimated accurately from the material hardness for each series of materials and alloys. A cavitation erosion model is proposed for SUS304 and cobalt alloy ST6 based on observations via scanning electron microscopy. The temperature effect showed a similar tendency for both vibratory and cavitating liquid jet tests after defining a relative temperature (a percentage temperature between freezing and boiling points). Erosion rates in various liquids including liquid metals can be evaluated by a combination of material density and sound velocity for the test liquid and the specimen material. Impact load measurements were used to establish a prediction method for the incubation period.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
ASTM (ed) (2005) Annual book of ASTM standards. G32-03 106–122
ASTM (ed) (2005) Annual book of ASTM standards. G134-95 561–572
Okada T, Iwai Y, Hattori S (1984) Corrosion fatigue of steel under cavitation erosion generated intermittently in 3% Salt water (results of two-stage tests with and without cavitation erosion. Wear 96:85–98
Hattori S, Nakao E (2002) Cavitation erosion mechanisms and quantitative evaluation based on erosion particles. Wear 249:839–845
Sugiyama K, Nakahama S, Hattori S, Nakano K (2005) Slurry wear and cavitation erosion of thermal-sprayed cermet. Wear 258:768–775
Hattori S, Takinami M (2010) Comparison of cavitation erosion rate with liquid impingement erosion rate. Wear 269:31–316
Hattori S, Ishikura R, Zhang Q (2004) Construction of database on cavitation erosion and analyses of carbon steel data. Wear 257:1022–1029
Hattori S, Ishikura R (2010) Revision of cavitation erosion database and analysis of stainless steel data. Wear 268:109–116
Hattori S, Kitagawa T (2010) Analysis of cavitation erosion resistance of cast iron and nonferrous metals based on database and comparison with carbon steel data. Wear 269:443–448
Hattori S, Mikami N (2009) Cavitation erosion resistance of stellite alloy weld overlays. Wear 267:1954–1960
Hattori S, Goto Y, Fukuyama T (2006) Influence of temperature on erosion by a cavitating liquid jet. Wear 260:1217–1223
Hattori S, Inoue F, Watashi K, Hashimoto T (2008) Effect of liquid properties on cavitation erosion in liquid metals. Wear 265:1649–1654
Hattori S, Hirose T, Sugiyama K (2010) Prediction method for cavitation erosion based on measurement of bubble collapse impact loads. Wear 269:507–514
Heymann FJ (1970) Characterization and determination of erosion resistance, ASTM STP474. Am Soc Test Mater 212–222
Gibra IN (1973) Probability and statistical inference for scientists and engineers. Prentice-Hall, Englewood Cliffs
Okada T, Iwai Y, Yamamoto A (1983) A study of cavitation erosion of cast iron. Wear 84:297–312
The Society of Materials Science (1964) (ed) Fatigue of metals. Maruzen, Tokyo, pp 170–191
The Society of Materials Science (1981) (ed) Handbook of fatigue design for metals. Yokendo, Tokyo, pp 4–5
Hattori S, Maekawa N, Kawai Y (2000) Cavitation erosion of titanium alloys. Trans Jpn Soc Mech Eng 66A(648):1627–1633
Hammitt FG (1980) Cavitation and multiphase flow phenomena. McGraw-Hill International Book Company, New York, pp 250–251
Plesset MS (1972) Temperature effects in cavitation damage. Trans ASME J Basic Eng 94:559–566
Hattori S, Tanaka Y (2002) Influence of air content and vapor pressure of liquids on cavitation erosion. Trans Jpn Soc Mech Eng 68B:13–136
Futakawa et al (2003) Cavitation erosion in mercury target of spallation neutron source. Proceedings of CAV2003, Osaka GS-11-006
Young SG, Johnston JR (1970) Effect of temperature and pressure on cavitation damage in sodium ASTM STP 474. Am Soc Tst Mater 67–108
Thiruvengadam A, Preizer HS, Couchman CD (1964) Cavitation damage in liquid metals. NASA CR-54071 1-83
Thiruvengadam A, Preiser HS, Rudy SL (1965) Cavitation damage in liquid metal. NASA CR54459 1-10
Rayleigh LS (1917) On the pressure developed in a liquid during the collapse of a spherical cavity. Philos Mag 6(34):94, 200
Franc JP, Michel JM (2004) Fundamentals of cavitation. Kluwer Academic Publishers, New York, pp 281–291
Wilson ARW, Graham R (1957) Cavitation of metal surfaces in contact with lubricants. Conference on lubrication and wear, IME, London, pp 702–712
Garcia R, Hammitt FG (1967) Cavitation damage and correlations with material and fluid properties. Trans ASME J Basic Eng 89:753–763
Hattori S, Mori H, Okada T (1998) Quantitative evaluation of cavitation erosion. Trans ASME J Fluids Eng 120(1):179–185
Okada T, Iwai Y, Hattori S, Tanimura N (1995) Relation between impact load and the damage produced by cavitation bubble collapse. Wear 184:231–239
De Jonge JB, Nederveen A (1980) Effect of gust load alleviation on fatigue and crack growth in ALCLAD 2024–T3 ASTM STP. Am Soc Test Mater 714:170–184
Nakamura H (1981) Committee meeting on fatigue research. The Society of Materials Science, Tokyo No 158
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Hattori, S. (2014). Recent Investigations on Cavitation Erosion at the University of Fukui. In: Kim, KH., Chahine, G., Franc, JP., Karimi, A. (eds) Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction. Fluid Mechanics and Its Applications, vol 106. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-8539-6_11
Download citation
DOI: https://doi.org/10.1007/978-94-017-8539-6_11
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-8538-9
Online ISBN: 978-94-017-8539-6
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)