Abstract
Industrial hemp (Cannabis sativa L.) has one of the longest cultivation histories in Europe. Hemp fibres have recently been identified as viable fibre reinforcement in cementitious materials, however, there is still limited research dealing with it. In this research the potential of hemp fibres as fibre reinforcement in two types of concretes (normal- and foam concrete) was experimentally evaluated in terms of the composite compression strength, splitting tensile strength and energy absorption capacity. Primary bast hemp fibres of 5, 10, 20 and 40 mm in length with 0.5 % dosages per volume were used as reinforcement. The results show that hemp fibres could be a promising alternative to traditional fibres in cementitious composites. The addition of hemp fibres to both normal and foam concrete results in around 50 % decrease of the composites compression strength with simultaneous increases of the splitting tensile strength in foam concrete and decrease in normal concrete. Hemp fibres significantly increase the energy dissipation capacity of the composite. In the case of normal concrete up to 100 %, whereas in foam concrete the enhancement was even more significant, up to 900 %. The optimal balance between the increased energy dissipation capacity and the resulting loss in compression strength of the cementitious composite could be targeted with reinforcing it with hemp fibres of 10 mm length.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Awwad E., Mabsout M., Hamad B., Farran M.T., Khatib H., (2012) Studies on fiber-reinforced concrete using industrial hemp fibers, Construction and Building Materials, Volume 35, pp 710-717, ISSN 0950-0618
Balagur PN, Shah SP. (1992) Fibre reinforced cement composites. Civil Engineering Series. McGraw-Hill.
Bentur A, Mindess S. (2007) Fibre reinforced cementitious composites. Modern Concrete Technology Series, CRC Press, Taylor & Francis Group.
Bergström S. G., Gram H. E., (1984) Durability of alkali-sensitive fibres in concrete, International Journal of Cement Composites and Lightweight Concrete, Volume 6, Issue 2, pp. 75-80
Dalmay, P., Smith, A., Chotard, T., Sahay-Turner, P., Gloaguen, V., Krausz, P., (2010) Properties of cellulosic fibre reinforced plaster: influence of hemp or flax fibres on the properties of set gypsum. J. Mater. Sci. 45, 793–803.
Filho J. A. M., Silva F. A., Toledo Filho R. D., (2013) Degradation kinetics and aging mechanisms on sisal fiber cement composite systems, Cement and Concrete Composites, Volume 40, pp 30-39, ISSN 0958-9465
Filho R. D. T., Scrivener K., England G. L., Ghavami K., (2000) Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites, Cement & Concrete Comp., 22, pp. 127-143
Hamzaoui R., Guessasma S., Mecheri B., Eshtiaghi A.M., Bennabi A., (2014) Microstructure and mechanical performance of modified mortar using hemp fibres and carbon nanotubes, Materials & Design, Volume 56, pp 60-68, ISSN 0261-3069
Jarabo R., Fuente E., Monte M.C., Savastano Jr. H., Mutjé P., Negro C., (2012) Use of cellulose fibers from hemp core in fiber-cement production. Effect on flocculation, retention, drainage and product properties, Industrial Crops and Products, Volume 39, pp 89-96, ISSN 0926-6690
Johnston C.D, (2010), Fiber-Reinforced Cements and Concretes, ISBN 90–5699-694-0, Taylor and Francis
Juárez C., Durán A., Valdez P., Fajardo G., (2007) Performance of “Agave lecheguilla” natural fiber in portland cement composites exposed to severe environment conditions, Building and Environment, 42, pp. 1151-1157.
Kriker, A. Bali, G. Debicki, M. Bouziane, M. Chabannet, (2008) Durability of date palm fibres and their use as reinforcement in hot dry climates”, Cement & Concrete Composites, 30, pp. 639-648.
Li, Z., Wang, L., Wang, X., (2004) Compressive and flexural properties of hemp fiber reinforced concrete. Fibers Polym. 5 (3), 187–197.
Li Z., Wang X. and Wang L. (2006) Properties of hemp fiber reinforced concrete composites. Composites: Part A, 37, 497 – 505, doi:10.1016/j.compositesa.2005.01.032
Merta I., Tschegg E., Tschegg S., Kolbitsch A., (2011) Fracture Machanics of Concrete Reinforced With Hemp, Straw and Elephant Grass Fibres, Composite Materials: Key to the Future, 18th International Conference on Composite Materials, Jeju Island, Korea
Merta I., Kopecsko K., Tschegg E. (2012), Durability of hemp fibers in the alkaline environment of cement matrix, Fibre Reinforced Concrete: challenges and opportunities ISBN: 978-2-35158-132-2, 8th RILEM INTERNATIONAL SYMPOSIUM ON FIBRE REINFORCED CONCRETE (BEFIB 2012), Guimarães, Portugal
Merta, I. Tschegg, E.K. (2013) Fracture energy of natural fibre reinforced concrete, Original Research Article Construction and Building Materials, Volume 40, 991-997
Merta I. (2014) Hemp Fibre Reinforced Foam Concrete: Discussion of the Wedge Splitting Test Method, International Journal of Research in Engineering and Technology, 0X, 1 - 5.
Mobasher B, (2011) Mechanics of Fiber and Textile Reinforced Cement Composites, ISBN 978-1-4398-0660-9, CRC Press, Taylor & Francis Group
Müssig J. (2010) Industrial applications of natural fibres: structure, properties and technical applications (Wiley series in renewable resource). West Sussex (United Kingdom): John Wiley & Sons.
ÖNORM B 3592 Determination of cut-through-tensile splitting strength and specific fracture energy of building materials, combinations of building materials and composites - Wedge splitting method
Ranalli P. (1999) Agronomical and physiological advances in hemp crops. Advances in hemp research. New York: The Haworth Press, 61–84.
Savastano, J.H., Warden, P.G., Coutts, R.S.P., (2000) Brazilian waste fibres as reinforcement for cement-based composites. Cem. Concr. Compos. 22, 379–384.
Sedan, D., Pagnoux, C., Smith, A., Chotard, T., 2008. Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction. J. Eur. Ceram. Soc. 28, 183–192
Sierra Beltran MG. (2011) Ductile cement-based composites with wood fibres – material design and experimental approach. PhD Thesis. ISBN 978-90-9026518-6. TU Delft, Netherlands.
Silva FA, Tolêdo Filho RD, Melo Filho JA, Rego Fairbairn E.M. (2010) Physical and mechanical properties of durable sisal fiber–cement composites. Constr Build Mater; 24(5): 777–85.
Silva FA., Mobasher B, Tolêdo Filho RD. (2010) Fatigue behavior of sisal fiber reinforced cement composites. Mat Sci Eng: A; 527(21–22): 5507–13.
Swamy, R.N., (1990) Vegetable fibre reinforced cement composites – a false dream or a potential reality? In: Sobral, H.S. (Ed.), Proceedings, 2nd International Symposium on Vegetable Plants and their Fibres as Building Materials. Rilem Proceedings 7. Chapman and Hall, London, pp. 3–8.
Tolêdo Filho R D; Ghavami K; England G L; Scrivener K (2003). Development of vegetable fibre-mortar composites of improved durability. Cement & Concrete Composites, 25, 185–196.
Torgal F.P., Jalali S (2011), Fibrous and Composite Materials for Civil Engineering Applications Natural fiber reinforced concrete, University of Minho, Portugal, edited by R Fangueiro, Woodhead Publishing Limited
Troëdec,M., Peyratout, C.S., Smith,A., Chotard, T., (2009).Influence of various chemical treatments on the interactions between hemp fibres and a lime matrix. J. Eur. Ceram. Soc. 29, 1861–1868.
Tschegg, E.K., (1986) Equipment and appropriate specimen shapes for tests to measure fracture values. Austrian Patent Nr. 390328, Austrian Patent Office, 31.1.1986.
Wei J., Meyer C., (2015) Degradation mechanisms of natural fiber in the matrix of cement composites, Cement and Concrete Research, Volume 73, pp 1-16, ISSN 0008-8846
Acknowledgments
This research was carried out with the support of the Hertha Firnberg post-doc fellowship of the author provided by the Austrian Science Fund (FWF) under the grant nr. T 503-N13. Part of the research was enabled with the support of the Austrian Research Promotion Agency (FFG) under the Innovation Check program with grant nr. 840149.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 RILEM
About this paper
Cite this paper
Merta, I. (2016). Hemp Fibres—A Promising Reinforcement for Cementitious Materials. In: Fangueiro, R., Rana, S. (eds) Natural Fibres: Advances in Science and Technology Towards Industrial Applications. RILEM Bookseries, vol 12. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-7515-1_22
Download citation
DOI: https://doi.org/10.1007/978-94-017-7515-1_22
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-7513-7
Online ISBN: 978-94-017-7515-1
eBook Packages: EngineeringEngineering (R0)