Abstract
The present review is concerned with rheometers that are particularly advantageous for the generation of large, rapid transient shear deformations in highly viscous, non—Newtonian fluids, viz. sliding plate and sliding cylinder rheometers. Large, rapid deformations are particularly useful for the study of time dependent structural changes and nonlinear viscoelasticity, and a number of material functions have been defined to facilitate the interpretation and presentation of nonlinear viscoelastic data.1 The rheometers described here are thus of particular value in the evaluation of rheologically complex materials that are processed using industrial machinery. Included in this category of materials are molten plastics, elastomers, concentrated polymer solutions, asphalts, bread doughs, and other concentrated suspensions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
J. M. Dealy, J. Rheol., 1984, 28, 181.
J. M. Dealy, Rheometers for Molten Plastics, Van Nostrand Reinhold, New York, 1982.
G. Heuser and E. Krause, Rheol. Acta, 1979, 18, 553.
J. G. Savins and A. B. Metzner, Rheol. Acta, 1970, 9, 365.
P. T. Gavin and R. W. Whorlow, J. Appl. Polym. Sci., 1975, 19, 567.
D. S. Pearson and W. E. Rochefort, J. Polym. Sci., Polym. Phys. Ed., 1982, 20, 83.
K. Walters and R. A. Kemp, Rheol. Acta, 1968, 7, 1.
W. C. MacSporran and R. P. Spiers, Rheol. Acta, 1982, 21, 193.
W. C. MacSporran and R. P. Spiers, Rheol. Acta, 1984, 23, 90.
R. L. Powell and W. H. Schwartz, J. Polym. Sci., Polym. Phys. Ed., 1979, 17, 969.
R. L. Powell and W. H. Schwartz, J. Rheol., 1979, 23, 323.
E. Ganani and R. L. Powell, J. Rheol., 1985, 29, 931.
J. M. Dealy, US Patent 4 463 928, 1984.
J. M. Dealy, US Patent 4 571 989, 1986.
B. Maxwell, Polym. Eng. Sci., 1967, 7, 145.
R. J. J. Jonpschaap, K. M. Knapper and J. S. Lopulissa, Polym. Eng. Sci., 1978, 18, 788.
T. N. G. Abbott and K. Walters, J. Fluid Mech., 1970, 40, 205.
P. Payvar and R. I. Tanner, Trans. Soc. Rheol., 1973, 17, 449.
L. H. Gross and B. Maxwell, Trans. Soc. Rheol., 1972, 16, 577.
J. S. Dodge and I. M. Krieger, Rheol. Acta, 1969, 8, 480.
T. M. T. Yang and I. M. Krieger, J. Rheol., 1978, 22, 413.
T. T. Tee and J. M. Dealy, Trans. Soc. Rheol., 1975, 19, 595.
S. Onogi, T. Masuda and T. Matsumoto, Trans. Soc. Rheol., 1970, 14, 275.
T. Matsumoto, Y. Segawa, Y. Waroshina and S. Onogi, Trans. Soc. Rheol., 1973, 17, 47.
S. Onogi and T. Matsumoto, Polym. Eng. Rev., 1981, 1, 45.
J. M. Dealy and T. K. P. Vu, J. Non-Newt. Fluid Mech., 1977/78, 3, 127.
H. M. Laun and J. Meissner, Rheol. Acta, 1980, 19, 60.
W. Philippoff, in Physical Acoustics, Vol. II—B, W. P. Mason (Ed.), Academic Press, New York, 1965.
W. T. Read, J. Appl. Mech., 1950, 17, 349.
R. S. Rivlin and D. W. Saunders, Trans. Inst. Rubber ind., 1949, 24, 296.
E. N. da C. Andrade, Proc. Roy. Soc. (Lond.), 1911, 85, 448.
A. N. Gent, R. L. Henry and M. L. Roxbury, J. Appl. Mech., 1974, 41, 855.
S. Toki and J. L. White, J. Appl. Polym. Sci., 1982, 27, 3171.
A. J. Giacomin, PhD thesis, Chem. Eng., McGill University, Montreal, 1987.
A. J. Giacomin and J. M. Dealy, The effect of free boundaries in melt rheometers, Paper G3, 58th Annual Meeting Soc. Rheol., Tulsa, Oklahoma, Oct. 1986.
T. Y. Liu, D. W. Mead, D. S. Soong and M. C. Williams, Rheol. Acta, 1983, 22, 81.
G. K. Batchleor, An Introduction to Fluid Mechanics, Cambridge University Press, Cambridge, 1967, p. 191.
Y. Mochimaru, J. Non—Newt. Fluid Mech., 1983, 12, 135.
A. Narain and D. D. Joseph, Rheol. Acta, 1982, 21, 228.
A. W. Chow and G. G. Fuller, J Non—Newt. Fluid Mech., 1983, 12, 135.
H. Markovitz and B. D. Coleman, Adv. Appl. Mech., 1964, 8, 69.
I. F. MacDonald, B. C. Marsh and E. Ashare, Chem. Eng. Sci., 1969, 24, 1615.
J. L. Schrag, Trans. Soc. Rheol., 1977, 21, 399.
R. H. Burton, M. J. Folkes, K. A. Narh and A. Keller, J. Mater. Sci., 1983, 18, 315.
J. Dickenson and N. D. Vinh, Proc. 5th Canad. Congr. Appl. Mech., 1975, p. 515.
K. C. Brown and P. N. Joubert, J. Fluid Mech., 1969, 35, 737.
J. R. F. Arthur and K. H. Roscoe, Civ. Eng. Public Wks Eng. Rev., 1961, 56, 659.
S. L. Agarwal and S. Venkatesan, in ASTM STP No. 392, 1965, p. 152.
P. M. Blair-Fish and P. L. Bransby, J. Eng. Ind., Trans. ASME, 17, Feb. 1973.
U. Tzn and R. M. Nedderman, Chem. Eng. Sci., 1985, 40, 337.
J. W. Delaplaine, A.ICh.E.J., 1956, 2, 127, 371.
G. Broersma, Behavior of Granular Materials, Stam Tech. Publ., Culemborg, The Netherlands, 1972, p. 49.
J. Smid and J. Novosad, Powder Technol., 1970/71, 4, 322.
J. M. Dealy and S. S. Soong, J. Rheol., 1984, 28, 355.
A. J. Giacomin and J. M. Dealy, J. Rheol. (SPE ANTEC Tech. Papers), 1986, 32, 711.
J. E. Bujake, J. Colloid Interface Sci., 1968, 27, 229.
T. D. Khong, S. L. Malhotra and L.-P. Blanchard, Rheol. Acta, 1979, 18, 382.
K. Osaki, S. Kimura and M. Kurata, J. Rheol., 1981, 25, 549.
N. Sivashinsky, A. T. Tsai, T. J. Moon and D. S. Soong, J. Rheol., 1984, 28, 287.
T. Y. Liu, D. S. Soong and M. C. Williams, J. Polym. Sci., Polym. Phys. Ed., 1984, 22, 1561.
S. K. Kimura, K. Osaki and M. Kurata, J. Polym. Sci., Polym. Phys. Ed., 1981, 19, 151.
J. Meissner, Chemie, 1984, 38, 35.
S. Middleman, Trans. Soc. Rheol., 1969, 13, 123.
F. P. LaMantia, B. de Cindio, E. Sorta and D. Acierno, Rheol. Acta, 1979, 18, 369.
D. Acierno et al., Trans. Soc. Rheol., 1977, 21, 261.
S. M. Fruh and F. Rodriguez, A.I.Ch.E.J., 1970, 16, 907.
H. P. Huerlimann and J. Meissner, Multidirectional shear rheometer for polymer melt, Int. Conf. Viscoelasticity of Polymeric Liquids, Grenoble, Jan. 1986.
M. Fujiyama and M. Takayanagi, Kogyo Kagaku Zasshi, 1969, 72, 1163.
H. M. Laun, Rheol. Acta, 1982, 21, 464.
J. Meissner, Pure App!. Chem., 1984, 56, 369.
F. D. Dexter, J. C. Miller and W. Philippoff, Trans. Soc. Rheol., 1961, 5, 193.
M. Fleissner, Angew. Makromol. Chem., 1981, 94, 197.
F. Nazem and Y. Hill, Trans. Soc. Rheol., 1974, 18, 87.
S. Montes and J. L. White, Rubber Chem. Technol., 1982, 55, 1354.
I. Furuta, V. M. Lobe and J. L. White, J. Non—Newt. Fluid Mech., 1976, 1, 207.
C. Goldstein, Trans. Soc. Rheol., 1984, 18, 357.
F. Shama and P. Sherman, J. Food Sci., 1966, 31, 699.
M. Fukushima, S. Taneya and T. Sone, J. Soc. Mater. Sci. Japan, 1964, 13, 331.
G. E. Hibberd and N. S. Parker, Cereal Chem., 1978, 55, 102.
G. E. Hibberd and N. S. Parker, Cereal Chem., 1975, 52, 3.
G. E. Hibberd and N. S. Parker, Cereal Chem., 1979, 56, 232.
J. M. Faubion, P. C. Dreese and K. C. Diehl, in Rheology of Wheat Products, Amer. Assoc. Cereal Chemists, St. Paul, Minnesota, 1985, p. 91.
B. H. Shah and R. Darby, Polym. Eng. Sci., 1976, 16, 46.
T. Murayama, J. App!. Polym. Sci., 1982, 27, 80.
A. Haghtalab, M.Eng. thesis, Chem. Eng., McGill University, Montreal, 1985.
J. Janeschitz-Kriegl, Polymer Melt Rheology and Flow Birefringence, Springer Verlag, Berlin/New York, 1983.
H. H. Hull, J. Colloid Sci., 1952, 7, 316.
A. C. Zettlemoyer, Offic. Dig. Fed. Paint Varnish Prod. Club, 1960, 32 (424), 615.
F. C. Starr, US Patent 4 466 274, 1984.
Slocumb Corp., Wilmington, Delaware, USA.
S. R. Doshi and J. M. Dealy, J. Rheol., 1987, 31, 563.
D. Zülle, J. J. Linster, H. P. Hrlimann and J. Meissner, J. Rheol., 1987, 31, 583.
P. J. Cain, Sliding Plate Rheometer for Viscoelastic Materials, MTS Systems Corporation, Box 24012, Minneapolis, Minnesota 55424, USA.
M. Segel, Physik. Z., 1903, 4, 493.
A. Pochettino, Nuovo Cimento, 1914, 8, 77.
D. Tollenaar and M. C. Bisschop, J. Colloid Sci., 1955, 10, 151.
A. W. Myers and J. A. Faucher, Trans. Soc. Rheol., 1968, 12, 183.
B. Maxwell, in Order in the Amorphous State of Polymers, S. E. Keinath, R. L. Miller and J. K. Rieke (Eds), Plenum, New York, 1986.
A. T. Tsai and D. S. Soong, J. Rheol., 1985, 29, 1.
G. E. Hibberd, W. J. Wallace and K. A. Wyatt, J. Sci. Instr., 1966, 43, 84.
G. E. Hibberd and W. J. Wallace, Rheol. Acta, 1966, 5, 193.
G. E. Hibberd, Rheol. Acta, 1970, 9, 497.
G. E. Hibberd, Rheol. Acta, 1970, 9, 501.
G. E. Hibberd, Rheol. Acta, 1975, 14, 151.
G. Pangalos and J. M. Dealy, J. Oil Col. Chemists Assoc., 1985, 68(3), 59.
R. V. McCarthy, J. Rheol., 1978, 22, 623.
B. Maxwell and K. S. Cook, J. Polym. Sci., Polym. Symp., 1985, 72, 343.
A. Gotsis, MS thesis, Virginia Polytechnic Institute and State University, Blacksburg, 1983.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1993 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Dealy, J.M., Giacomin, A.J. (1993). Sliding Plate and Sliding Cylinder Rheometers. In: Collyer, A.A., Clegg, D.W. (eds) Rheological Measurement. Springer, Dordrecht. https://doi.org/10.1007/978-94-017-2898-0_12
Download citation
DOI: https://doi.org/10.1007/978-94-017-2898-0_12
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-017-2900-0
Online ISBN: 978-94-017-2898-0
eBook Packages: Springer Book Archive