Advertisement

Dislocation-Based Length-Scales in Crystal Plasticity: Experiments and Modeling

  • Sia Nemat-Nasser
Conference paper
Part of the Solid Mechanics and Its Applications book series (SMIA, volume 114)

Abstract

Considered is a dislocation-based plasticity model that includes both temperature- and strain-rate effects, and heavily draws from a body of experimental data on various metals over broad ranges of strain rates, from quasi-static to 104/s and greater, and temperatures from 77 to 1,300K and greater. In this model, the role of the strain gradient is embedded in the nature of the dislocations, their density and distribution, and the manner by which they produce slip in crystal plasticity and affect the overall flow stress. The model includes length scales that are directly related to the dislocation densities and hence change with temperature and the strain-rate histories. The model can be used to calculate the force-deformation relations at micron to continuum dimensions. For plastic deformation of small polycrystalline samples involving only a few grains, geometric and textural incompatibilities will most likely manifest themselves through a size effect, and may affect the overall materials’ resistance to deformation (flow stress). This size effect is distinguished from the length scales in plasticity, and the size effect is viewed as a problem-dependent phenomenon. For a few interacting crystals, the proposed model of slip-induced crystal plasticity should adequately account for any such size effects

Keywords

plasticity length-scale size effect temperature strain-rate 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    J. Hirth and J. Lome, Theory of dislocations. 2nd Ed., John Wiley & Sons, New York, 1992.Google Scholar
  2. [2]
    G. Regazzoni, U.F. Knocks, and P.S. Follansbee, “Dislocation kinetics at high strain rates,” Acta Metall, vol. 35, pp. 2865–2875,1987.CrossRefGoogle Scholar
  3. [3]
    G. I. Taylor, “The mechanism of plastic deformation of crystals I, II,” Proc. R. Soc. Lond. A., vol. 145, pp. 362–387, pp. 388–404, 1934.Google Scholar
  4. [4]
    G. I. Taylor, “Plastic strain in metals,” J. Inst. Metals, vol. 62, pp. 307–324, 1938.Google Scholar
  5. [5]
    K. Ono., “Temperature dependence of dispersed barrier hardening,” J Appl. Phys., vol. 39, pp. 1803–1806, 1968.CrossRefGoogle Scholar
  6. [6]
    U. F. Kocks, A. S. Argon, and M. F. Ashby, “Thermodynamics and kinetics of slip,” Progress in Materials Science, vol. 19, pp. 1–271, 1975.CrossRefGoogle Scholar
  7. [7]
    S. Nemat-Nasser, T. Okinaka, and L. Ni, “A Physically-based constitutive model for bcc crystals with application to polycrystalline tantalum,” J. Mech. Phys. Solids, vol. 46, no. 6, pp. 1009–1038, 1998.CrossRefGoogle Scholar
  8. [8]
    S. Nemat-Nasser and J. B. Isaacs, “Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and Ta-W alloys,” Acta Mater, vol. 45, pp. 907–919, 1997.CrossRefGoogle Scholar
  9. [9]
    S. Nemat-Nasser and Y. L. Li, “Flow stress of fee poly crystals with application to OFHC Cu,” Acta Mater, vol. 46, pp. 565–577, 1998.CrossRefGoogle Scholar
  10. [10]
    S. Nemat-Nasser, J. B. Isaacs, and J. E. Starrett, “Hopkinson techniques for dynamic recovery experiments,” Proc. R. Soc. Lond. A., vol. 435, pp. 371–391, 1991.CrossRefGoogle Scholar
  11. [11]
    S. Nemat-Nasser, Y. F. Li, and J. B. Isaacs, “Experimental/computational evaluation of flow stress at high strain rates with application to adiabatic shear banding,” Mech. Mat., vol. 17, pp. 111–134, 1994.CrossRefGoogle Scholar
  12. [12]
    R. Kapoor and S. Nemat-Nasser, “Determination of temperature rise during high strain rate deformation,” Mech. Mat., vol. 27, pp. 1–12, 1998.CrossRefGoogle Scholar
  13. [13]
    S. Nemat-Nasser and W. G. Guo, “High-strain-rate response of commercially pure vanadium,” Mech. Mat., vol. 32, no. 4, pp. 243–260, 2000.CrossRefGoogle Scholar
  14. [14]
    S. Nemat-Nasser, W. G. Guo, and D. P. Kihl, “Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures,” J. Mech. Phys. Solids, vol. 49, pp. 1823–1846, 2001.CrossRefGoogle Scholar
  15. [15]
    S. Nemat-Nasser, W. G. Guo, V. Nesterenko, S. S. Indrakanti, and Y. Gu, “Dynamic response of conventional and hot isostatically pressed Ti-6A1–4V alloys: experiments and modeling,” Mech. Mat., vol. 33, no. 8, pp. 425–439, 2001.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2004

Authors and Affiliations

  • Sia Nemat-Nasser
    • 1
  1. 1.Center of Excellence for Advanced MaterialsUniversity of California San DiegoLa JollaUSA

Personalised recommendations